Loading ...
Sorry, an error occurred while loading the content.

Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip

Expand Messages
  • Doug Taylor
    Janet, sounds like the vertical stripes could be banding. Try a head cleaning and then a nozzle check to see that all nozzles are working properly and not
    Message 1 of 13 , Mar 1, 2011
    View Source
    • 0 Attachment
      Janet, sounds like the vertical stripes could be banding. Try a head
      cleaning and then a nozzle check to see that all nozzles are working
      properly and not clogged.

      On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:

      > Thanks Doug, I finally figured it out,, tried to print some B&W
      > images and
      > they were terrible: dark, tiny vertical stripes, etc. I'm wondering
      > what
      > I can do to get the print I'm expecting after having bought this
      > product...
      > Any thoughts?
      >
      > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...>
      > wrote:
      >
      > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your
      > > printer model number, click on Install(your printer number).command
      > >
      > > Go to System Preferences, Print & Fax, you should see a new
      > installed
      > > printer called Quad(your printer number). Choose this printer in the
      > > print dialogue.
      > >
      > > On Feb 28, 2011, at 4:36 PM, janet wrote:
      > >
      > > > I've bought it - have accessed the "download" pg. I don't see the
      > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg
      > > > tutorial but can't get past the 1st pg. if I can't figure out the
      > > > download procedure. I'm using a Mac Snow Leopard so that piece is
      > > > good to go....Now how do I get it to load?
      > > >
      > > >
      > > >
      > >
      > >
      > >
      > > [Non-text portions of this message have been removed]
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
      > --
      > Janet Sampson Reider
      > JSR Photography
      > www.janetreider.com
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >



      [Non-text portions of this message have been removed]
    • Janet Reider
      Thanks Doug, I ll check it - nozzle etc. However, it also could be that I ve set it up wrong by putting in an incorrect printer profile - K7 and it
      Message 2 of 13 , Mar 1, 2011
      View Source
      • 0 Attachment
        Thanks Doug, I'll check it - nozzle etc. However, it also could be that
        I've set it up wrong by putting in an incorrect printer profile - " K7" and
        it should be UC. SO, how do I remedy that?
        Also, that was the only folder I installed...the printer profile - and I'm
        thinking there is something important I'm missing here as there are many
        more pages in the Tutorial! The Tutorial stops at Leopard and my system
        is Snow Leopard - is that important.
        Perhaps my next step (after checking nozzles and head cleaning) might be to
        go to the "DiagnosticScript.command site and send you that info....yes?

        On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...> wrote:

        > Janet, sounds like the vertical stripes could be banding. Try a head
        > cleaning and then a nozzle check to see that all nozzles are working
        > properly and not clogged.
        >
        > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
        >
        > > Thanks Doug, I finally figured it out,, tried to print some B&W
        > > images and
        > > they were terrible: dark, tiny vertical stripes, etc. I'm wondering
        > > what
        > > I can do to get the print I'm expecting after having bought this
        > > product...
        > > Any thoughts?
        > >
        > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...>
        > > wrote:
        > >
        > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your
        > > > printer model number, click on Install(your printer number).command
        > > >
        > > > Go to System Preferences, Print & Fax, you should see a new
        > > installed
        > > > printer called Quad(your printer number). Choose this printer in the
        > > > print dialogue.
        > > >
        > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
        > > >
        > > > > I've bought it - have accessed the "download" pg. I don't see the
        > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg
        > > > > tutorial but can't get past the 1st pg. if I can't figure out the
        > > > > download procedure. I'm using a Mac Snow Leopard so that piece is
        > > > > good to go....Now how do I get it to load?
        > > > >
        > > > >
        > > > >
        > > >
        > > >
        > > >
        > > > [Non-text portions of this message have been removed]
        > > >
        > > >
        > > >
        > > > ------------------------------------
        > > >
        > > > Yahoo! Groups Links
        > > >
        > > >
        > > >
        > > >
        > >
        > > --
        > > Janet Sampson Reider
        > > JSR Photography
        > > www.janetreider.com
        > >
        > > [Non-text portions of this message have been removed]
        > >
        > >
        > >
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > ------------------------------------
        >
        > Yahoo! Groups Links
        >
        >
        >
        >


        --
        Janet Sampson Reider
        JSR Photography
        www.janetreider.com


        [Non-text portions of this message have been removed]
      • Doug Taylor
        When in QTR printer settings, you need to choose the Curve that matches your Ink Set, such as UC; choose the media that matches what paper you are printing on,
        Message 3 of 13 , Mar 1, 2011
        View Source
        • 0 Attachment
          When in QTR printer settings, you need to choose the Curve that
          matches your Ink Set, such as UC; choose the media that matches what
          paper you are printing on, and then choose the correct Black Ink,
          either Matte or Photo. If you do this, think you'll get a nice print


          On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:

          > Thanks Doug, I'll check it - nozzle etc. However, it also could be
          > that
          > I've set it up wrong by putting in an incorrect printer profile - "
          > K7" and
          > it should be UC. SO, how do I remedy that?
          > Also, that was the only folder I installed...the printer profile -
          > and I'm
          > thinking there is something important I'm missing here as there are
          > many
          > more pages in the Tutorial! The Tutorial stops at Leopard and my
          > system
          > is Snow Leopard - is that important.
          > Perhaps my next step (after checking nozzles and head cleaning)
          > might be to
          > go to the "DiagnosticScript.command site and send you that
          > info....yes?
          >
          > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...>
          > wrote:
          >
          > > Janet, sounds like the vertical stripes could be banding. Try a head
          > > cleaning and then a nozzle check to see that all nozzles are working
          > > properly and not clogged.
          > >
          > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
          > >
          > > > Thanks Doug, I finally figured it out,, tried to print some B&W
          > > > images and
          > > > they were terrible: dark, tiny vertical stripes, etc. I'm
          > wondering
          > > > what
          > > > I can do to get the print I'm expecting after having bought this
          > > > product...
          > > > Any thoughts?
          > > >
          > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
          > <dougtaylor13@...>
          > > > wrote:
          > > >
          > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
          > your
          > > > > printer model number, click on Install(your printer
          > number).command
          > > > >
          > > > > Go to System Preferences, Print & Fax, you should see a new
          > > > installed
          > > > > printer called Quad(your printer number). Choose this printer
          > in the
          > > > > print dialogue.
          > > > >
          > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
          > > > >
          > > > > > I've bought it - have accessed the "download" pg. I don't
          > see the
          > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
          > pg
          > > > > > tutorial but can't get past the 1st pg. if I can't figure
          > out the
          > > > > > download procedure. I'm using a Mac Snow Leopard so that
          > piece is
          > > > > > good to go....Now how do I get it to load?
          > > > > >
          > > > > >
          > > > > >
          > > > >
          > > > >
          > > > >
          > > > > [Non-text portions of this message have been removed]
          > > > >
          > > > >
          > > > >
          > > > > ------------------------------------
          > > > >
          > > > > Yahoo! Groups Links
          > > > >
          > > > >
          > > > >
          > > > >
          > > >
          > > > --
          > > > Janet Sampson Reider
          > > > JSR Photography
          > > > www.janetreider.com
          > > >
          > > > [Non-text portions of this message have been removed]
          > > >
          > > >
          > > >
          > >
          > >
          > >
          > > [Non-text portions of this message have been removed]
          > >
          > >
          > >
          > > ------------------------------------
          > >
          > > Yahoo! Groups Links
          > >
          > >
          > >
          > >
          >
          > --
          > Janet Sampson Reider
          > JSR Photography
          > www.janetreider.com
          >
          > [Non-text portions of this message have been removed]
          >
          >
          >



          [Non-text portions of this message have been removed]
        • Janet Reider
          Hello Doug, I performed a nozzle check as well as a cleaning and the print-out is perfect. I was able to replace the incorrect printer profile with the correct
          Message 4 of 13 , Mar 1, 2011
          View Source
          • 0 Attachment
            Hello Doug,

            I performed a nozzle check as well as a cleaning and the print-out is
            perfect.

            I was able to replace the incorrect printer profile with the correct one and
            made a test print. That print has tiny vertical stripes and is also
            dark...not as dark as the 1st test yesterday but not acceptable. SO - here
            is the copy/paste from DiagnosticScript. You'll see a "looking for
            printer..." that's because I started the printing not knowing my printer
            was off....
            Let me know what I can do as I"m anxious to begin printing some B&W images
            - that do not have green or purple casts..

            Thanks,
            Janet Reider
            janet@...

            Last login: Tue Mar 1 14:40:37 on ttys000
            /Applications/QuadToneRIP/DiagnosticScript.command ; exit;
            Mac:~ janetreider$ /Applications/QuadToneRIP/DiagnosticScript.command ;
            exit;

            ********************************************************************

            **** QuadToneRIP 2.7.1 Diagnostic Script --- Save Output for Analysis ****

            ********************************************************************

            Tue Mar 1 15:16:21 EST 2011

            **** System Info ****
            Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010;
            root:xnu-1504.9.26~3/RELEASE_I386

            **** Printer Info ****
            scheduler is running
            system default destination: EPSON_Stylus_Photo_2200_wifi
            device for BLACK_PRINTER___Suzanne_Reiderb_9s_Computer:
            dnssd://BLACK%20PRINTER%20%40%20Suzanne%20Reider%E2%80%99s%20Computer._ipp._tcp.local.
            device for EPSON_Perfection_3200: usb://00000000-0000-0000-0000-000004B8011C
            device for EPSON_Stylus_Photo_2200:
            usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450
            device for EPSON_Stylus_Photo_2200_wifi:
            dnssd://EPSON%20Stylus%20Photo%202200._riousbprint._tcp.local.
            device for HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer:
            dnssd://HP%20Photosmart%20C3100%20series%20%40%20Suzanne%20Reider%E2%80%99s%20Computer._ipp._tcp.local.
            device for HP_Photosmart_C4700_series:
            usb://HP/Photosmart%20C4700%20series?serial=CN97RHZ0F205CN
            device for Quad2200:
            usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450
            BLACK_PRINTER___Suzanne_Reiderb_9s_Computer accepting requests since Wed
            Dec 1 15:30:42 2010
            EPSON_Perfection_3200 accepting requests since Mon Oct 18 10:23:04 2010
            EPSON_Stylus_Photo_2200 accepting requests since Mon Feb 28 17:00:57 2011
            EPSON_Stylus_Photo_2200_wifi accepting requests since Mon Feb 28 17:39:02
            2011
            HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer accepting requests
            since Tue Mar 1 14:19:43 2011
            HP_Photosmart_C4700_series accepting requests since Fri Nov 26 00:16:26 2010
            Quad2200 accepting requests since Tue Mar 1 14:52:13 2011
            printer BLACK_PRINTER___Suzanne_Reiderb_9s_Computer is idle. enabled since
            Wed Dec 1 15:30:42 2010
            printer EPSON_Perfection_3200 is idle. enabled since Mon Oct 18 10:23:04
            2010
            printer EPSON_Stylus_Photo_2200 is idle. enabled since Mon Feb 28 17:00:57
            2011
            printer EPSON_Stylus_Photo_2200_wifi is idle. enabled since Mon Feb 28
            17:39:02 2011
            Looking for printer...
            printer HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer now
            printing HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer-97.
            enabled since Tue Mar 1 14:19:43 2011
            Looking for printer...
            printer HP_Photosmart_C4700_series is idle. enabled since Fri Nov 26
            00:16:26 2010
            printer Quad2200 is idle. enabled since Tue Mar 1 14:52:13 2011
            Ready to print.
            HP_Photosmart_C3100_series___Suzanne_Reiderb_9s_Computer-97 janetreider
            48128 Sun Nov 14 19:53:18 2010

            **** QTR Programs ****
            /Library/Printers/QTR/bin
            Quad.pm* qcurve* qgamma* qmerge* quadcurves*
            qacv* qdensity* qgraph* qpart* quadprofile*
            qacvraw* qdiff* qlimit* qplot*
            qadd* qdotgain* qline* qspline*

            /Library/Printers/QTR/filter
            -rwxr-xr-x 1 root admin 2586 Feb 2 2010 quadtoneprint
            -rwxr-xr-x 1 root admin 1570336 Dec 2 12:49 quadtoprinter

            **** Plugin Programs ****
            total 0
            drwxr-xr-x 3 janetreider janetreider 102 Mar 26 2010 QuadTonePDE.plugin

            **** QTR Printer Descriptions ****
            /Library/Printers/QTR/ppd
            Quad10000.ppd.gz Quad4880.ppd.gz QuadEX.ppd.gz
            Quad1160.ppd.gz Quad7000.ppd.gz QuadR1800.ppd.gz
            Quad1200.ppd.gz Quad7500.ppd.gz QuadR1900.ppd.gz
            Quad1270.ppd.gz Quad7600.ppd.gz QuadR200.ppd.gz
            Quad1280.ppd.gz Quad7800.ppd.gz QuadR220.ppd.gz
            Quad1290.ppd.gz Quad7880.ppd.gz QuadR2400.ppd.gz
            Quad1400.ppd.gz Quad860.ppd.gz QuadR260.ppd.gz
            Quad2000.ppd.gz Quad870.ppd.gz QuadR280.ppd.gz
            Quad2100.ppd.gz Quad890.ppd.gz QuadR2880.ppd.gz
            Quad2200.ppd.gz Quad9000.ppd.gz QuadR300.ppd.gz
            Quad3000.ppd.gz Quad9500.ppd.gz QuadR320.ppd.gz
            Quad3800.ppd.gz Quad9600.ppd.gz QuadR340.ppd.gz
            Quad3880.ppd.gz Quad980.ppd.gz QuadR380.ppd.gz
            Quad4000.ppd.gz Quad9800.ppd.gz QuadR800.ppd.gz
            Quad4800.ppd.gz Quad9880.ppd.gz

            **** QTR Printer Profiles ****
            Quad1160-UT Quad2200-GQ Quad7000-K6 Quad9800 QuadR260-MIS
            Quad1200 Quad2200-K7 Quad7500-K6 Quad9800-K7 QuadR280
            Quad1270-UT2 Quad2200-UT Quad7600 Quad9880 QuadR280-MIS
            Quad1280-K6 Quad2200-UT7 Quad7600-K7 Quad9880-K7 QuadR2880
            Quad1280-UT2 Quad3000 Quad7800 QuadEX QuadR2880-K7
            Quad1290-K6 Quad3800 Quad7800-K7 QuadR1800 QuadR300-GQ
            Quad1290-UT2 Quad3800-K7 Quad7880 QuadR1800-3MK QuadR300-K6
            Quad1400 Quad3880 Quad7880-K7 QuadR1800-K7 QuadR320-GQ
            Quad1400-K6 Quad3880-K7 Quad860-UT QuadR1900 QuadR320-K6
            Quad1400-MIS Quad4000 Quad870-UT2 QuadR1900-K7 QuadR340-GQ
            Quad2000 Quad4000-GQ Quad890-K6 QuadR200-GQ QuadR340-K6
            Quad2100 Quad4000-K7 Quad890-UT2 QuadR200-K6 QuadR380
            Quad2100-GQ Quad4800 Quad9000-K6 QuadR220-GQ QuadR380-MIS
            Quad2100-K7 Quad4800-K7 Quad9500-K6 QuadR220-K6 QuadR800
            Quad2100-UT Quad4880 Quad9600 QuadR2400 QuadR800-3MK
            Quad2100-UT7 Quad4880-K7 Quad9600-K7 QuadR2400-K7 QuadR800-K7
            Quad2200 Quad7000-GQ Quad980 QuadR260

            **** USB connections ****
            -r-xr-xr-x 1 root wheel 91792 Jan 4 01:22 /usr/libexec/cups/backend/usb
            DEBUG:
            load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.plugin)
            (kr:0x00000000)
            DEBUG:
            load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin)
            (kr:0x00000000)
            direct usb://EPSON/Stylus%20Photo%202200?serial=L53010302171504450 "EPSON
            Stylus Photo 2200" "EPSON Stylus Photo 2200"
            "SERN:L53010302171504450;MFG:EPSON;CMD:ESCPL2,BDC,D4;MDL:Stylus Photo
            2200;CLS:PRINTER;DES:EPSON Stylus Photo 2200;" ""

            **** CUPS Info ****
            D [28/Feb/2011:17:38:55 -0500] [Job 185] cgpdftoraster - languageLevel = 3,
            mediaBox.size.width = 288, mediaBox.size.height = 432
            D [28/Feb/2011:17:38:55 -0500] [Job 185] band width = 2700, bytesPerRow =
            10800, band height = 970, height = 4140
            D [28/Feb/2011:17:38:55 -0500] [Job 185] context width = 2700, height = 970,
            bitsPerComponent = 8, bitsPerPixel = 32, bytesPerRow = 10800, bitmapInfo =
            5, resolution = (720.000000, 720.000000)
            D [28/Feb/2011:17:38:55 -0500] [Job 185] NOT using display list
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] STATE: +offline-report
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Looking for printer...
            D [28/Feb/2011:17:38:55 -0500] [Job 185] Job canceled by "janetreider"
            D [28/Feb/2011:17:38:55 -0500] [Job 185] End of messages
            D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state=3(idle)
            D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state-message="Looking for
            printer..."
            D [28/Feb/2011:17:38:55 -0500] [Job 185] printer-state-reasons=none
            E [28/Feb/2011:17:44:43 -0500] [cups-deviced] Bad line from "HP-Fax": on
            write, error=-1
            E [28/Feb/2011:17:49:19 -0500] [Job 191] Stopping unresponsive job!
            E [01/Mar/2011:14:25:42 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:25:42 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:36:14 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:36:14 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:40:09 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:40:09 -0500] Unable to register ICC color profiles for
            "Quad2200-K7" - -4229
            E [01/Mar/2011:14:40:38 -0500] Unable to register ICC color profiles for
            "Quad2200" - -4229
            E [01/Mar/2011:14:40:38 -0500] Unable to register ICC color profiles for
            "Quad2200" - -4229

            ********************************************************************

            **** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****

            ********************************************************************

            logout

            [Process completed]



            On Tue, Mar 1, 2011 at 7:37 AM, Doug Taylor <dougtaylor13@...> wrote:

            > Janet, sounds like the vertical stripes could be banding. Try a head
            > cleaning and then a nozzle check to see that all nozzles are working
            > properly and not clogged.
            >
            > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
            >
            > > Thanks Doug, I finally figured it out,, tried to print some B&W
            > > images and
            > > they were terrible: dark, tiny vertical stripes, etc. I'm wondering
            > > what
            > > I can do to get the print I'm expecting after having bought this
            > > product...
            > > Any thoughts?
            > >
            > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor <dougtaylor13@...>
            > > wrote:
            > >
            > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for your
            > > > printer model number, click on Install(your printer number).command
            > > >
            > > > Go to System Preferences, Print & Fax, you should see a new
            > > installed
            > > > printer called Quad(your printer number). Choose this printer in the
            > > > print dialogue.
            > > >
            > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
            > > >
            > > > > I've bought it - have accessed the "download" pg. I don't see the
            > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19 pg
            > > > > tutorial but can't get past the 1st pg. if I can't figure out the
            > > > > download procedure. I'm using a Mac Snow Leopard so that piece is
            > > > > good to go....Now how do I get it to load?
            > > > >
            > > > >
            > > > >
            > > >
            > > >
            > > >
            > > > [Non-text portions of this message have been removed]
            > > >
            > > >
            > > >
            > > > ------------------------------------
            > > >
            > > > Yahoo! Groups Links
            > > >
            > > >
            > > >
            > > >
            > >
            > > --
            > > Janet Sampson Reider
            > > JSR Photography
            > > www.janetreider.com
            > >
            > > [Non-text portions of this message have been removed]
            > >
            > >
            > >
            >
            >
            >
            > [Non-text portions of this message have been removed]
            >
            >
            >
            > ------------------------------------
            >
            > Yahoo! Groups Links
            >
            >
            >
            >


            --
            Janet Sampson Reider
            JSR Photography
            www.janetreider.com


            [Non-text portions of this message have been removed]
          • Janet Reider
            Should i have installed any more than the printer profile? Curves, for example? Well you ll see what I ve got when you look at the Diagnostic Script - ... --
            Message 5 of 13 , Mar 1, 2011
            View Source
            • 0 Attachment
              Should i have installed any more than the printer profile? Curves, for
              example?
              Well you'll see what I've got when you look at the Diagnostic Script -

              On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote:

              > When in QTR printer settings, you need to choose the Curve that
              > matches your Ink Set, such as UC; choose the media that matches what
              > paper you are printing on, and then choose the correct Black Ink,
              > either Matte or Photo. If you do this, think you'll get a nice print
              >
              >
              > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:
              >
              > > Thanks Doug, I'll check it - nozzle etc. However, it also could be
              > > that
              > > I've set it up wrong by putting in an incorrect printer profile - "
              > > K7" and
              > > it should be UC. SO, how do I remedy that?
              > > Also, that was the only folder I installed...the printer profile -
              > > and I'm
              > > thinking there is something important I'm missing here as there are
              > > many
              > > more pages in the Tutorial! The Tutorial stops at Leopard and my
              > > system
              > > is Snow Leopard - is that important.
              > > Perhaps my next step (after checking nozzles and head cleaning)
              > > might be to
              > > go to the "DiagnosticScript.command site and send you that
              > > info....yes?
              > >
              > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...>
              > > wrote:
              > >
              > > > Janet, sounds like the vertical stripes could be banding. Try a head
              > > > cleaning and then a nozzle check to see that all nozzles are working
              > > > properly and not clogged.
              > > >
              > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
              > > >
              > > > > Thanks Doug, I finally figured it out,, tried to print some B&W
              > > > > images and
              > > > > they were terrible: dark, tiny vertical stripes, etc. I'm
              > > wondering
              > > > > what
              > > > > I can do to get the print I'm expecting after having bought this
              > > > > product...
              > > > > Any thoughts?
              > > > >
              > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
              > > <dougtaylor13@...>
              > > > > wrote:
              > > > >
              > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
              > > your
              > > > > > printer model number, click on Install(your printer
              > > number).command
              > > > > >
              > > > > > Go to System Preferences, Print & Fax, you should see a new
              > > > > installed
              > > > > > printer called Quad(your printer number). Choose this printer
              > > in the
              > > > > > print dialogue.
              > > > > >
              > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
              > > > > >
              > > > > > > I've bought it - have accessed the "download" pg. I don't
              > > see the
              > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
              > > pg
              > > > > > > tutorial but can't get past the 1st pg. if I can't figure
              > > out the
              > > > > > > download procedure. I'm using a Mac Snow Leopard so that
              > > piece is
              > > > > > > good to go....Now how do I get it to load?
              > > > > > >
              > > > > > >
              > > > > > >
              > > > > >
              > > > > >
              > > > > >
              > > > > > [Non-text portions of this message have been removed]
              > > > > >
              > > > > >
              > > > > >
              > > > > > ------------------------------------
              > > > > >
              > > > > > Yahoo! Groups Links
              > > > > >
              > > > > >
              > > > > >
              > > > > >
              > > > >
              > > > > --
              > > > > Janet Sampson Reider
              > > > > JSR Photography
              > > > > www.janetreider.com
              > > > >
              > > > > [Non-text portions of this message have been removed]
              > > > >
              > > > >
              > > > >
              > > >
              > > >
              > > >
              > > > [Non-text portions of this message have been removed]
              > > >
              > > >
              > > >
              > > > ------------------------------------
              > > >
              > > > Yahoo! Groups Links
              > > >
              > > >
              > > >
              > > >
              > >
              > > --
              > > Janet Sampson Reider
              > > JSR Photography
              > > www.janetreider.com
              > >
              > > [Non-text portions of this message have been removed]
              > >
              > >
              > >
              >
              >
              >
              > [Non-text portions of this message have been removed]
              >
              >
              >
              > ------------------------------------
              >
              > Yahoo! Groups Links
              >
              >
              >
              >


              --
              Janet Sampson Reider
              JSR Photography
              www.janetreider.com


              [Non-text portions of this message have been removed]
            • Janet Reider
              Can you look at the DaignosticScript.command that i have copied and pasted and try to help me rectify this situation. The prints are no longer striped but
              Message 6 of 13 , Mar 2, 2011
              View Source
              • 0 Attachment
                Can you look at the "DaignosticScript.command that i have copied and pasted
                and try to help me rectify this situation. The prints are no longer striped
                but extraordinarily dark w/o any gradations...DARK!
                Please get back to me - or, refund by $50.00
                Thank you.
                Janet Reider

                On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote:

                > When in QTR printer settings, you need to choose the Curve that
                > matches your Ink Set, such as UC; choose the media that matches what
                > paper you are printing on, and then choose the correct Black Ink,
                > either Matte or Photo. If you do this, think you'll get a nice print
                >
                >
                > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:
                >
                > > Thanks Doug, I'll check it - nozzle etc. However, it also could be
                > > that
                > > I've set it up wrong by putting in an incorrect printer profile - "
                > > K7" and
                > > it should be UC. SO, how do I remedy that?
                > > Also, that was the only folder I installed...the printer profile -
                > > and I'm
                > > thinking there is something important I'm missing here as there are
                > > many
                > > more pages in the Tutorial! The Tutorial stops at Leopard and my
                > > system
                > > is Snow Leopard - is that important.
                > > Perhaps my next step (after checking nozzles and head cleaning)
                > > might be to
                > > go to the "DiagnosticScript.command site and send you that
                > > info....yes?
                > >
                > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...>
                > > wrote:
                > >
                > > > Janet, sounds like the vertical stripes could be banding. Try a head
                > > > cleaning and then a nozzle check to see that all nozzles are working
                > > > properly and not clogged.
                > > >
                > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
                > > >
                > > > > Thanks Doug, I finally figured it out,, tried to print some B&W
                > > > > images and
                > > > > they were terrible: dark, tiny vertical stripes, etc. I'm
                > > wondering
                > > > > what
                > > > > I can do to get the print I'm expecting after having bought this
                > > > > product...
                > > > > Any thoughts?
                > > > >
                > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
                > > <dougtaylor13@...>
                > > > > wrote:
                > > > >
                > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
                > > your
                > > > > > printer model number, click on Install(your printer
                > > number).command
                > > > > >
                > > > > > Go to System Preferences, Print & Fax, you should see a new
                > > > > installed
                > > > > > printer called Quad(your printer number). Choose this printer
                > > in the
                > > > > > print dialogue.
                > > > > >
                > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
                > > > > >
                > > > > > > I've bought it - have accessed the "download" pg. I don't
                > > see the
                > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
                > > pg
                > > > > > > tutorial but can't get past the 1st pg. if I can't figure
                > > out the
                > > > > > > download procedure. I'm using a Mac Snow Leopard so that
                > > piece is
                > > > > > > good to go....Now how do I get it to load?
                > > > > > >
                > > > > > >
                > > > > > >
                > > > > >
                > > > > >
                > > > > >
                > > > > > [Non-text portions of this message have been removed]
                > > > > >
                > > > > >
                > > > > >
                > > > > > ------------------------------------
                > > > > >
                > > > > > Yahoo! Groups Links
                > > > > >
                > > > > >
                > > > > >
                > > > > >
                > > > >
                > > > > --
                > > > > Janet Sampson Reider
                > > > > JSR Photography
                > > > > www.janetreider.com
                > > > >
                > > > > [Non-text portions of this message have been removed]
                > > > >
                > > > >
                > > > >
                > > >
                > > >
                > > >
                > > > [Non-text portions of this message have been removed]
                > > >
                > > >
                > > >
                > > > ------------------------------------
                > > >
                > > > Yahoo! Groups Links
                > > >
                > > >
                > > >
                > > >
                > >
                > > --
                > > Janet Sampson Reider
                > > JSR Photography
                > > www.janetreider.com
                > >
                > > [Non-text portions of this message have been removed]
                > >
                > >
                > >
                >
                >
                >
                > [Non-text portions of this message have been removed]
                >
                >
                >
                > ------------------------------------
                >
                > Yahoo! Groups Links
                >
                >
                >
                >


                --
                Janet Sampson Reider
                JSR Photography
                www.janetreider.com


                [Non-text portions of this message have been removed]
              • shileshjani
                Janet, I have read these threads, and I have not been able to find which printer and inks you are using. With QTR it is essentail you match the curves/profiles
                Message 7 of 13 , Mar 3, 2011
                View Source
                • 0 Attachment
                  Janet,

                  I have read these threads, and I have not been able to find which printer and inks you are using. With QTR it is essentail you match the curves/profiles you use with the correct printer and ink set. I am not familiar with the vegaries of the various Mac OS systems. So I cannot help you there. But let us start with the basics. What printer, which inks?

                  Hope things start working out for you.

                  Shilesh

                  --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote:
                  >
                  > Can you look at the "DaignosticScript.command that i have copied and pasted
                  > and try to help me rectify this situation. The prints are no longer striped
                  > but extraordinarily dark w/o any gradations...DARK!
                  > Please get back to me - or, refund by $50.00
                  > Thank you.
                  > Janet Reider
                  >
                  > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote:
                  >
                  > > When in QTR printer settings, you need to choose the Curve that
                  > > matches your Ink Set, such as UC; choose the media that matches what
                  > > paper you are printing on, and then choose the correct Black Ink,
                  > > either Matte or Photo. If you do this, think you'll get a nice print
                  > >
                  > >
                  > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:
                  > >
                  > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be
                  > > > that
                  > > > I've set it up wrong by putting in an incorrect printer profile - "
                  > > > K7" and
                  > > > it should be UC. SO, how do I remedy that?
                  > > > Also, that was the only folder I installed...the printer profile -
                  > > > and I'm
                  > > > thinking there is something important I'm missing here as there are
                  > > > many
                  > > > more pages in the Tutorial! The Tutorial stops at Leopard and my
                  > > > system
                  > > > is Snow Leopard - is that important.
                  > > > Perhaps my next step (after checking nozzles and head cleaning)
                  > > > might be to
                  > > > go to the "DiagnosticScript.command site and send you that
                  > > > info....yes?
                  > > >
                  > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...>
                  > > > wrote:
                  > > >
                  > > > > Janet, sounds like the vertical stripes could be banding. Try a head
                  > > > > cleaning and then a nozzle check to see that all nozzles are working
                  > > > > properly and not clogged.
                  > > > >
                  > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
                  > > > >
                  > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W
                  > > > > > images and
                  > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm
                  > > > wondering
                  > > > > > what
                  > > > > > I can do to get the print I'm expecting after having bought this
                  > > > > > product...
                  > > > > > Any thoughts?
                  > > > > >
                  > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
                  > > > <dougtaylor13@...>
                  > > > > > wrote:
                  > > > > >
                  > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
                  > > > your
                  > > > > > > printer model number, click on Install(your printer
                  > > > number).command
                  > > > > > >
                  > > > > > > Go to System Preferences, Print & Fax, you should see a new
                  > > > > > installed
                  > > > > > > printer called Quad(your printer number). Choose this printer
                  > > > in the
                  > > > > > > print dialogue.
                  > > > > > >
                  > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
                  > > > > > >
                  > > > > > > > I've bought it - have accessed the "download" pg. I don't
                  > > > see the
                  > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
                  > > > pg
                  > > > > > > > tutorial but can't get past the 1st pg. if I can't figure
                  > > > out the
                  > > > > > > > download procedure. I'm using a Mac Snow Leopard so that
                  > > > piece is
                  > > > > > > > good to go....Now how do I get it to load?
                  > > > > > > >
                  > > > > > > >
                  > > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > > [Non-text portions of this message have been removed]
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > > ------------------------------------
                  > > > > > >
                  > > > > > > Yahoo! Groups Links
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > > >
                  > > > > >
                  > > > > > --
                  > > > > > Janet Sampson Reider
                  > > > > > JSR Photography
                  > > > > > www.janetreider.com
                  > > > > >
                  > > > > > [Non-text portions of this message have been removed]
                  > > > > >
                  > > > > >
                  > > > > >
                  > > > >
                  > > > >
                  > > > >
                  > > > > [Non-text portions of this message have been removed]
                  > > > >
                  > > > >
                  > > > >
                  > > > > ------------------------------------
                  > > > >
                  > > > > Yahoo! Groups Links
                  > > > >
                  > > > >
                  > > > >
                  > > > >
                  > > >
                  > > > --
                  > > > Janet Sampson Reider
                  > > > JSR Photography
                  > > > www.janetreider.com
                  > > >
                  > > > [Non-text portions of this message have been removed]
                  > > >
                  > > >
                  > > >
                  > >
                  > >
                  > >
                  > > [Non-text portions of this message have been removed]
                  > >
                  > >
                  > >
                  > > ------------------------------------
                  > >
                  > > Yahoo! Groups Links
                  > >
                  > >
                  > >
                  > >
                  >
                  >
                  > --
                  > Janet Sampson Reider
                  > JSR Photography
                  > www.janetreider.com
                  >
                  >
                  > [Non-text portions of this message have been removed]
                  >
                • Janet Reider
                  Hi - Thanks for your offer of help. My printer is an Epson 2200 - so those are the printer profile ink sets that I checked in my download. On the print
                  Message 8 of 13 , Mar 4, 2011
                  View Source
                  • 0 Attachment
                    Hi - Thanks for your offer of help.

                    My printer is an Epson 2200 - so those are the "printer profile" ink sets
                    that I checked in my download. On the print page I do not have sliders to
                    chose percentages of this or that ink. In fact, it seems as if the print
                    page that comes up when I ask the printer to "print" is not the one I should
                    be seeing but I don't know how to access any other The print page that
                    comes up is the one that is the standard for my printer.
                    I'm also working with Photoshop CS5 (not one of the ones in the
                    tutorial).
                    For the time being I have returned to my CS5 B&W settings to try to get
                    decent B&W prints as I'm simply not succeeding in my effort to use QuadTone.
                    Any suggestions are welcomed.
                    Janet

                    On Fri, Mar 4, 2011 at 12:05 AM, shileshjani <shileshjani@...> wrote:

                    >
                    >
                    > Janet,
                    >
                    > I have read these threads, and I have not been able to find which printer
                    > and inks you are using. With QTR it is essentail you match the
                    > curves/profiles you use with the correct printer and ink set. I am not
                    > familiar with the vegaries of the various Mac OS systems. So I cannot help
                    > you there. But let us start with the basics. What printer, which inks?
                    >
                    > Hope things start working out for you.
                    >
                    > Shilesh
                    >
                    > --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote:
                    > >
                    > > Can you look at the "DaignosticScript.command that i have copied and
                    > pasted
                    > > and try to help me rectify this situation. The prints are no longer
                    > striped
                    > > but extraordinarily dark w/o any gradations...DARK!
                    > > Please get back to me - or, refund by $50.00
                    > > Thank you.
                    > > Janet Reider
                    > >
                    > > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@...> wrote:
                    > >
                    > > > When in QTR printer settings, you need to choose the Curve that
                    > > > matches your Ink Set, such as UC; choose the media that matches what
                    > > > paper you are printing on, and then choose the correct Black Ink,
                    > > > either Matte or Photo. If you do this, think you'll get a nice print
                    > > >
                    > > >
                    > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:
                    > > >
                    > > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be
                    > > > > that
                    > > > > I've set it up wrong by putting in an incorrect printer profile - "
                    > > > > K7" and
                    > > > > it should be UC. SO, how do I remedy that?
                    > > > > Also, that was the only folder I installed...the printer profile -
                    > > > > and I'm
                    > > > > thinking there is something important I'm missing here as there are
                    > > > > many
                    > > > > more pages in the Tutorial! The Tutorial stops at Leopard and my
                    > > > > system
                    > > > > is Snow Leopard - is that important.
                    > > > > Perhaps my next step (after checking nozzles and head cleaning)
                    > > > > might be to
                    > > > > go to the "DiagnosticScript.command site and send you that
                    > > > > info....yes?
                    > > > >
                    > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@...>
                    > > > > wrote:
                    > > > >
                    > > > > > Janet, sounds like the vertical stripes could be banding. Try a
                    > head
                    > > > > > cleaning and then a nozzle check to see that all nozzles are
                    > working
                    > > > > > properly and not clogged.
                    > > > > >
                    > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
                    > > > > >
                    > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W
                    > > > > > > images and
                    > > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm
                    > > > > wondering
                    > > > > > > what
                    > > > > > > I can do to get the print I'm expecting after having bought this
                    > > > > > > product...
                    > > > > > > Any thoughts?
                    > > > > > >
                    > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
                    > > > > <dougtaylor13@...>
                    > > > > > > wrote:
                    > > > > > >
                    > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
                    > > > > your
                    > > > > > > > printer model number, click on Install(your printer
                    > > > > number).command
                    > > > > > > >
                    > > > > > > > Go to System Preferences, Print & Fax, you should see a new
                    > > > > > > installed
                    > > > > > > > printer called Quad(your printer number). Choose this printer
                    > > > > in the
                    > > > > > > > print dialogue.
                    > > > > > > >
                    > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
                    > > > > > > >
                    > > > > > > > > I've bought it - have accessed the "download" pg. I don't
                    > > > > see the
                    > > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
                    > > > > pg
                    > > > > > > > > tutorial but can't get past the 1st pg. if I can't figure
                    > > > > out the
                    > > > > > > > > download procedure. I'm using a Mac Snow Leopard so that
                    > > > > piece is
                    > > > > > > > > good to go....Now how do I get it to load?
                    > > > > > > > >
                    > > > > > > > >
                    > > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > > [Non-text portions of this message have been removed]
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > > ------------------------------------
                    > > > > > > >
                    > > > > > > > Yahoo! Groups Links
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > > >
                    > > > > > >
                    > > > > > > --
                    > > > > > > Janet Sampson Reider
                    > > > > > > JSR Photography
                    > > > > > > www.janetreider.com
                    > > > > > >
                    > > > > > > [Non-text portions of this message have been removed]
                    > > > > > >
                    > > > > > >
                    > > > > > >
                    > > > > >
                    > > > > >
                    > > > > >
                    > > > > > [Non-text portions of this message have been removed]
                    > > > > >
                    > > > > >
                    > > > > >
                    > > > > > ------------------------------------
                    > > > > >
                    > > > > > Yahoo! Groups Links
                    > > > > >
                    > > > > >
                    > > > > >
                    > > > > >
                    > > > >
                    > > > > --
                    > > > > Janet Sampson Reider
                    > > > > JSR Photography
                    > > > > www.janetreider.com
                    > > > >
                    > > > > [Non-text portions of this message have been removed]
                    > > > >
                    > > > >
                    > > > >
                    > > >
                    > > >
                    > > >
                    > > > [Non-text portions of this message have been removed]
                    > > >
                    > > >
                    > > >
                    > > > ------------------------------------
                    > > >
                    > > > Yahoo! Groups Links
                    > > >
                    > > >
                    > > >
                    > > >
                    > >
                    > >
                    > > --
                    > > Janet Sampson Reider
                    > > JSR Photography
                    > > www.janetreider.com
                    > >
                    > >
                    > > [Non-text portions of this message have been removed]
                    > >
                    >
                    >
                    >



                    --
                    Janet Sampson Reider
                    JSR Photography
                    www.janetreider.com


                    [Non-text portions of this message have been removed]
                  • shileshjani
                    Janet, Did you exactly follow install instructions per the tutorial linked below. It clearly states that you OS X 10.6 Snow Leopard is supported.
                    Message 9 of 13 , Mar 4, 2011
                    View Source
                    • 0 Attachment
                      Janet,

                      Did you exactly follow install instructions per the tutorial linked below. It clearly states that you OS X 10.6 Snow Leopard is supported.

                      http://www.quadtonerip.com/Tutorial.pdf

                      On CS3 if you follow the instructions, you should clearly see Quad 2200 in the Print Dialog. Are you getting that far?

                      Shilesh

                      --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@...> wrote:
                      >
                      > Hi - Thanks for your offer of help.
                      >
                      > My printer is an Epson 2200 - so those are the "printer profile" ink sets
                      > that I checked in my download. On the print page I do not have sliders to
                      > chose percentages of this or that ink. In fact, it seems as if the print
                      > page that comes up when I ask the printer to "print" is not the one I should
                      > be seeing but I don't know how to access any other The print page that
                      > comes up is the one that is the standard for my printer.
                      > I'm also working with Photoshop CS5 (not one of the ones in the
                      > tutorial).
                      > For the time being I have returned to my CS5 B&W settings to try to get
                      > decent B&W prints as I'm simply not succeeding in my effort to use QuadTone.
                      > Any suggestions are welcomed.
                      > Janet
                      >
                      > On Fri, Mar 4, 2011 at 12:05 AM, shileshjani <shileshjani@...> wrote:
                      >
                      > >
                      > >
                      > > Janet,
                      > >
                      > > I have read these threads, and I have not been able to find which printer
                      > > and inks you are using. With QTR it is essentail you match the
                      > > curves/profiles you use with the correct printer and ink set. I am not
                      > > familiar with the vegaries of the various Mac OS systems. So I cannot help
                      > > you there. But let us start with the basics. What printer, which inks?
                      > >
                      > > Hope things start working out for you.
                      > >
                      > > Shilesh
                      > >
                      > > --- In QuadtoneRIP@yahoogroups.com, Janet Reider <janet@> wrote:
                      > > >
                      > > > Can you look at the "DaignosticScript.command that i have copied and
                      > > pasted
                      > > > and try to help me rectify this situation. The prints are no longer
                      > > striped
                      > > > but extraordinarily dark w/o any gradations...DARK!
                      > > > Please get back to me - or, refund by $50.00
                      > > > Thank you.
                      > > > Janet Reider
                      > > >
                      > > > On Tue, Mar 1, 2011 at 10:43 AM, Doug Taylor <dougtaylor13@> wrote:
                      > > >
                      > > > > When in QTR printer settings, you need to choose the Curve that
                      > > > > matches your Ink Set, such as UC; choose the media that matches what
                      > > > > paper you are printing on, and then choose the correct Black Ink,
                      > > > > either Matte or Photo. If you do this, think you'll get a nice print
                      > > > >
                      > > > >
                      > > > > On Mar 1, 2011, at 8:50 AM, Janet Reider wrote:
                      > > > >
                      > > > > > Thanks Doug, I'll check it - nozzle etc. However, it also could be
                      > > > > > that
                      > > > > > I've set it up wrong by putting in an incorrect printer profile - "
                      > > > > > K7" and
                      > > > > > it should be UC. SO, how do I remedy that?
                      > > > > > Also, that was the only folder I installed...the printer profile -
                      > > > > > and I'm
                      > > > > > thinking there is something important I'm missing here as there are
                      > > > > > many
                      > > > > > more pages in the Tutorial! The Tutorial stops at Leopard and my
                      > > > > > system
                      > > > > > is Snow Leopard - is that important.
                      > > > > > Perhaps my next step (after checking nozzles and head cleaning)
                      > > > > > might be to
                      > > > > > go to the "DiagnosticScript.command site and send you that
                      > > > > > info....yes?
                      > > > > >
                      > > > > > On Tue, Mar 1, 2011 at 4:37 AM, Doug Taylor <dougtaylor13@>
                      > > > > > wrote:
                      > > > > >
                      > > > > > > Janet, sounds like the vertical stripes could be banding. Try a
                      > > head
                      > > > > > > cleaning and then a nozzle check to see that all nozzles are
                      > > working
                      > > > > > > properly and not clogged.
                      > > > > > >
                      > > > > > > On Feb 28, 2011, at 7:35 PM, Janet Reider wrote:
                      > > > > > >
                      > > > > > > > Thanks Doug, I finally figured it out,, tried to print some B&W
                      > > > > > > > images and
                      > > > > > > > they were terrible: dark, tiny vertical stripes, etc. I'm
                      > > > > > wondering
                      > > > > > > > what
                      > > > > > > > I can do to get the print I'm expecting after having bought this
                      > > > > > > > product...
                      > > > > > > > Any thoughts?
                      > > > > > > >
                      > > > > > > > On Mon, Feb 28, 2011 at 2:25 PM, Doug Taylor
                      > > > > > <dougtaylor13@>
                      > > > > > > > wrote:
                      > > > > > > >
                      > > > > > > > > Go to Applications, QuadtoneRIP, Profiles, open the folder for
                      > > > > > your
                      > > > > > > > > printer model number, click on Install(your printer
                      > > > > > number).command
                      > > > > > > > >
                      > > > > > > > > Go to System Preferences, Print & Fax, you should see a new
                      > > > > > > > installed
                      > > > > > > > > printer called Quad(your printer number). Choose this printer
                      > > > > > in the
                      > > > > > > > > print dialogue.
                      > > > > > > > >
                      > > > > > > > > On Feb 28, 2011, at 4:36 PM, janet wrote:
                      > > > > > > > >
                      > > > > > > > > > I've bought it - have accessed the "download" pg. I don't
                      > > > > > see the
                      > > > > > > > > > "Install-QTR-#.#.#. package to click on. I've printed the 19
                      > > > > > pg
                      > > > > > > > > > tutorial but can't get past the 1st pg. if I can't figure
                      > > > > > out the
                      > > > > > > > > > download procedure. I'm using a Mac Snow Leopard so that
                      > > > > > piece is
                      > > > > > > > > > good to go....Now how do I get it to load?
                      > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > > [Non-text portions of this message have been removed]
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > > ------------------------------------
                      > > > > > > > >
                      > > > > > > > > Yahoo! Groups Links
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > > >
                      > > > > > > >
                      > > > > > > > --
                      > > > > > > > Janet Sampson Reider
                      > > > > > > > JSR Photography
                      > > > > > > > www.janetreider.com
                      > > > > > > >
                      > > > > > > > [Non-text portions of this message have been removed]
                      > > > > > > >
                      > > > > > > >
                      > > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > > [Non-text portions of this message have been removed]
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > > ------------------------------------
                      > > > > > >
                      > > > > > > Yahoo! Groups Links
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > > >
                      > > > > >
                      > > > > > --
                      > > > > > Janet Sampson Reider
                      > > > > > JSR Photography
                      > > > > > www.janetreider.com
                      > > > > >
                      > > > > > [Non-text portions of this message have been removed]
                      > > > > >
                      > > > > >
                      > > > > >
                      > > > >
                      > > > >
                      > > > >
                      > > > > [Non-text portions of this message have been removed]
                      > > > >
                      > > > >
                      > > > >
                      > > > > ------------------------------------
                      > > > >
                      > > > > Yahoo! Groups Links
                      > > > >
                      > > > >
                      > > > >
                      > > > >
                      > > >
                      > > >
                      > > > --
                      > > > Janet Sampson Reider
                      > > > JSR Photography
                      > > > www.janetreider.com
                      > > >
                      > > >
                      > > > [Non-text portions of this message have been removed]
                      > > >
                      > >
                      > >
                      > >
                      >
                      >
                      >
                      > --
                      > Janet Sampson Reider
                      > JSR Photography
                      > www.janetreider.com
                      >
                      >
                      > [Non-text portions of this message have been removed]
                      >
                    • scottevansphotography
                      OS 10.9 Maverick give me this error when trying to install the profile for my 7880 QTR Installing QuadToneRIP Curves Printer Quad7880-K7 Couldn t open
                      Message 10 of 13 , Dec 13, 2013
                      View Source
                      • 0 Attachment

                        OS 10.9 Maverick give me this error when trying to install the profile for my 7880 QTR


                        Installing QuadToneRIP Curves Printer Quad7880-K7

                        Couldn't open /etc/cups/ppd/Quad7880-K7.ppd for reading: No such file or directory


                        HELP!!!

                      Your message has been successfully submitted and would be delivered to recipients shortly.