I joined the Q15X25 group.
The method I came up with for zerobeating was to go to PSK and set the
center freq for 1KHz. Then I use the tune transmitter function to
send a 1KHz tone (dial freq + 1KHz). The other station also uses
PSK and sets the audio for 1KHz, then tunes the rig until the round phase
shift indicator shows either straight up or down. This method
worked real good locally, but you do have to have a fairly strong signal
for this to work.
I do adjust the freq of my rig from time to time using my HP 5329A freq
counter which has an external HP GPS disciplined oscillator attached to
it for a reference. But of course the other guy has to be doing
I'll watch for you guys this afternoon on 20M.
At 11:01 12/16/02 -0500, Russ Tower wrote:
Thanks for your response.
Regarding zero beating one another, all I could do was to wait and watch
for enough signal from Dave, N7MJW, to come in so that I could get
it perfectly centered in the waterfall when visible. I found that we were
initially off by 50 cycles and correcting for that made all the
Regarding skeds, I will try to be be on 14.103 LSB from about 20:00 UTC
today (Monday) until the band closes. I think that Dave will be on this
evening too, after he gets home from work.
I am usually unavailable from 20:00 UTC on Wednesday,
Thursday, Friday and Saturday, but can most likely arrange to be on for a
sked at times other than these evenings. I also plan to monitor 14.103
LSB in general during the times I can be here in the shack.
I will look for you on 14.103 LSB from 20:00 UTC on this Monday if that
is suitable, Mark.
From: Mark Miller
Date: Monday, December 16, 2002 15:34:19 PM
To: Russ Tower;
Cc: Michael Brown 1;
Subject: Re: Q15X25
I have done some testing too and I agree with your assessment of being on
frequency. How did you guys zero beat to each other? I also know that
audio level is critical. I would like to try again, so if you guys are
going to set up a sked let me know.
IncrediMail - Email has finally evolved -