Loading ...
Sorry, an error occurred while loading the content.

16590Re: [PostCardMailArt] Nancy G - your double layer binding tips

Expand Messages
  • Nancy Goodman
    Jun 1, 2012
      Not sure what happened.  Did you start with trying a one flange border?  Two can get tricky depending on the bulk of the fabric.  The other thing I do is steam iron the flange so it's not going to move or change shape on me while sewing. Sometimes I sew the flange on before I iron it to the pelex.  Another tip, make sure your edges are very crisp.  Sometimes I start my card as a 5 x 7, do all the art work and then cut it down to 4 x 6.  This gives a very crisp edge.  Hope this helps.  Believe me if I can do it, it's not that hard.

      Nancy G. 
      Nancy Goodman

      From: Maureen Curlewis <curlewism@...>
      To: "PostCardMailArt@yahoogroups.com" <PostCardMailArt@yahoogroups.com>
      Sent: Friday, June 1, 2012 2:54 AM
      Subject: Re: [PostCardMailArt] Nancy G - your double layer binding tips

      I tried your double flange tips on two postcards today!!!!  GRRRRRR
      It works perfectly well on a wall hanging, but on postcards!!
      I hang my head in shame. Truly.
      I will probably blog my disasters, because the Postcards in question were my "By the water's edge"!1
      I will show my disasters, then frogstitch them...........
      then do it all over again.
      I must admit that I PREFER handwork (so FORGIVING!!)  and  I hate the results I get with machine stitching

      From: Nancy Goodman <nhepgood@...>
      To: "PostCardMailArt@yahoogroups.com" <PostCardMailArt@yahoogroups.com>
      Sent: Wednesday, May 30, 2012 11:59 PM
      Subject: Re: [PostCardMailArt] Nancy G - your double layer binding tips

      Dear Sheree,
      Here is how I do it.  You can experiment with different widths to get different results.  I have also painted borders which gives a similar effect.  It is like the matting on a picture which is framed. 

      a. take a strip of fabric 1 inch width and fold it, edges together, wrong sides together.  Iron. One side has the fold, the other has the edges.
      b. Sew on to the sides, then top and bottom.  The side with the edges is matched to the edge of the card.  The fold side is on the inside side of the card. 

      If you want a second flange
      c.  repeat steps a and b above but cut your strip width about 3/4 inch so the first flange will show. 

      Then bind the postcard like you would bind a quilt. For my binding I use a 2 inch strip of fabric, folded with edges together, wrong sides together.  Iron. Stitch as you would for a quilt binding.  Just fold one edge under the other when you get to the end of the binding. Turn the binding and hand sew it to the card on the back side.

      Hope this is helpful.  If you have any questions, let me know. 

      Nancy G. 

      Nancy Goodman

      From: ShereeSews <shereesews@...>
      To: PostCardMailArt@yahoogroups.com
      Sent: Tuesday, May 29, 2012 8:51 PM
      Subject: [PostCardMailArt] Nancy G - your double layer binding tips

      Hi Nancy G - I love your double layered binding method. Can you share some tips on what works best? I have been dying to try this and would like to use on my Red-white-blue swap pc's.

      Thanks ShereeSews

    • Show all 21 messages in this topic