Re: Technical question on PT coordinate system
- Thank you Jim and Erik.
The references on PTStitcher are helpful.
I am having a devil of a time figuring out how to apply PTGui y,p,r to a panosphere having a right-handed coordinate system (meaning my X axis points left) Like PT, view is centered on (0,0,1) at y=p=r=0. Inverting the X axis in the rotation matrix seems to give correct alignments, however my projection mapping fns then fail.
I need to invert the hand again without losing the alignment, this is surely possible but I can't find the right way to do it.
Alternatively I could revert to left-handed coords, which Panini used for a long time, but I feel a bit stubborn since it took some effort to convert everything to right-handed.
--- In PanoToolsNG@yahoogroups.com, Jim Watters <jwatters@...> wrote:
> On 2013-02-17 6:47 AM, Erik Krause wrote:
> > Am 16.02.2013 15:54, schrieb Thomas:
> >> 1] do all PT family stitchers use the same coordinate system as original
> >> PanoTools?
> > As for Yaw, Roll and Pitch: Yes, as far as I know. The TrX, TrY, TrZ
> > mosaic coordinate model is unique to hugin/nona. PTGui uses a different
> > model with 5 coordinates: VPx, VPy, VPz, VPpan and VPtilt. They are not
> > documented (AFAIK) but Helmut Dersch found them out for himself and
> > implemented them in PTStitcherNG.
> From Helmut: "PTGui uses a 2-axis pan/tilt + 3-d translation, in that order"
> Dev Ghosh who originally worked on the mosic mode for Hugin during a GSoC, but
> never got finished, has just posted on the hugin-ptx list, "mosaic mode with
> intuitive warp parameters", that he is implementing his original method to
> create orthogonal views.
> > Furthermore PTGui uses PTStitcher o-line C-coordinates while hugin/nona
> > use S-coordinates. That means hugin coordinates are relative to the
> > complete source image while PTGui coordinates are relative to the
> > cropped image specified by the C-coodinates (the crop rectangle/circle).
> > See
> > http://wiki.panotools.org/PTStitcher#o-line_options for details
> Yes the GUIs of PTGui and Hugin use different cropping models.
> PTStitcher definitely understands both.
> Jim Watters
- Am 17.02.2013 21:07, schrieb Thomas:
> I need to invert the hand again without losing the alignment, this isRead on Euler angles: http://en.wikipedia.org/wiki/Euler_angles
> surely possible but I can't find the right way to do it.
(This is the exact point where my knowledge ends ;-)