Loading ...
Sorry, an error occurred while loading the content.

Re: [PanoToolsNG] Re: Panorama printer with paper rolls?

Expand Messages
  • Bjørn K Nilssen
    ... That was what I was doing, clinging to XP as long as I could ;) But as XP stopped booting (BSODs all the time), and my old install CD was sp1 (no SATA
    Message 1 of 36 , Dec 2, 2012
      On Sun, 02 Dec 2012 14:49:02 +0100, Henrik <tived@...> wrote:


      there reallly isn;t many reasons to move from 7 to 8 at the moment, 7 works fine - though i don;t know if 8 will be better or worse, some have reported that its faster? Its hard to say atm.
      I might have a go at it over the Xmas holidays as it takes a lot of time getting it all set up.

      I still have both XP x64, Vista x64 running along side with several Windows 7 x64 machines. all these have worked almost flawless since 2005 for XP x64, but they are all on good hardware :-)

      I think that its unreasonable to think that things are going to last for ever - Just my $.02 

      That was what I was doing, clinging to XP as long as I could ;) But as XP stopped booting (BSODs all the time), and my old install CD was sp1 (no SATA support) and my new MB had no IDE ports, I was kind of stuck. Slipstreaming with sp3 and all other kinds of juggling never really worked.
      At that time it felt a bit backwards to upgrade to Win7, as W8 hadjust been released. Also W8 was a lot cheaper than buying W7.

      BTW, I like W8 quite a lot :)

      Henrik Tived

      ----- Original Message -----


      Sun, 02 Dec 2012 13:54:23 +0100
      [PanoToolsNG] Re: Panorama printer with paper rolls?

      Am 02.12.2012 13:24, schrieb Bjørn K Nilssen:
      > But it is broken ;)
      > My old computer is gone - the cabinet and some of the HDDs remains, with
      > new OS.
      > Mos of the programs I use for printing is not installed on my laptop
      > (still XP), and many of them can't be installed neither, due to single
      > licenses. And the occasional print job, a receipt from a webshop, a
      > letter etc would be quite cumbersome to save, copy and print, instead of
      > just printing.

      There seems to be little experience with windows 8, I think mostly
      because no one (I know off) really likes it. I would have chosen windows
      7 for a new computer. However, did you check whether a windows 7 driver
      would work for your old printer? My epson photo 2100 works pretty good
      under win 7.

      I don't know whether this is still possible in win 8 but if I'd set up
      the old printer as "shared" on the XP computer I could print directly to
      it from win 7...

      Erik Krause


      <*> Wiki: http://wiki.panotools.org
      <*> User Guidelines: http://wiki.panotools.org/User_Guidelines
      <*> Nabble (Web) http://panotoolsng.586017.n4.nabble.com/
      <*> NG Member Map http://www.panomaps.com/ng
      <*> Moderators/List Admins: PanoToolsNG-owner@yahoogroups.com
      Yahoo! Groups Links

      <*> To visit your group on the web, go to:

      <*> Your email settings:
      Individual Email | Traditional

      <*> To change settings online go to:
      (Yahoo! ID required)

      <*> To change settings via email:

      <*> To unsubscribe from this group, send an email to:

      <*> Your use of Yahoo! Groups is subject to:

      Bjørn K Nilssen - 3D and 360-panorama - Kristiansand
    • antonio cabral
      I have the 5.5 and he 5.6. Could I send it for tived@iinet.net.au ? regards, Antonio Cabral Com os melhores cumprimentos, António Cabral digisfera web
      Message 36 of 36 , Dec 4, 2012
        I have the 5.5 and he 5.6.
        Could I send it for tived@... ?

        Antonio Cabral

        Com os melhores cumprimentos,
        António Cabral 


           web www.digisfera.pt

        phone  (+351) 214 062 218
        mobile (+351) 966 390 236

        Taguspark, Parque de Ciência e Tecnologia

        Edifício Inovação II, 421
        2740-122 Oeiras  Portugal

        2012/12/4 Henrik <tived@...>

        Contact autodesk, would b the first choice

        Sent from my iPhone

        On 05/12/2012, at 2:50, Michael McKelvey <m_t_j_mckelvey@...> wrote:

        Does anyone know how or where I can an old copy of Realviz Stitcher 5.5 from? I lost it from my PC and as Realviz have been taken over by AutoDesk am stumped as to where I can find a copy, I do have its original serial number.


      Your message has been successfully submitted and would be delivered to recipients shortly.