Loading ...
Sorry, an error occurred while loading the content.

Re: tour on CD, how to create the route if the unit is not D:

Expand Messages
  • felipe
    Finally I made !!! the trick was to write ./file.html that small single point and then / it works :D the final situation is that each step opens a new window,
    Message 1 of 6 , May 30, 2010
    • 0 Attachment
      Finally I made !!!
      the trick was to write ./file.html

      that small single point and then /

      it works :D

      the final situation is that each step opens a new window, the result is a lot of windows, so when I try to go back, the old opened window doesn't reacts (by it's open as all the all windows)

      can I control if it opens a new window or open in the present window?

      regards

      Juan Felipe

      --- In PanoToolsNG@yahoogroups.com, "felipe" <felipe_ing@...> wrote:
      >
      > Thanks that´s ok with autorun.ini, I will try
      >
      > but my biggest problem is to route the different files html making the tour to a CD room. the client will have the CD on the drive D: or E: it depends on the computer configuration
      >
      > So I need a "joker direction" to make the tour to work any time at the CD with no problem on the drive name...
      >
      > Regards
      >
      > Juan Felipe
      >
      > --- In PanoToolsNG@yahoogroups.com, Paulo Fernandes <paulo.jf@> wrote:
      > >
      > > If your autorun.ini is on the root of the pendrive/cd and the html is
      > > in the same place you just call apartamento.html
      > >
      > > Enviado desde o meu telemóvel.
      > > Sent from my mobile phone.
      > > ::::::::::::::::::::::::::::::::::::::::::::::::::::::
      > > Go Go Pixel - Design, Fotografia
      > > e Multimédia
      > > Calçada do Lidador, 22, 1ºAndar
      > > 4480-690 Vila do Conde Portugal
      > > Tel. +351 252 119 375
      > > Fax. +351 252 119 375
      > > ::::::::::::::::::::::::::::::::::::::::::::::::::::::
      > >
      > > On 2010/05/27, at 21:39, "felipe" <felipe_ing@> wrote:
      > >
      > > > I made alot of attemps, for example:
      > > > ../apartamento.html
      > > > also /apartamento.html
      > > >
      > > > but it doesn´t work
      > > >
      > > > only If I put
      > > >
      > > > E:/apartamento.html (I use my USB as tester)
      > > >
      > > > also the autorun.info doesn´t work (my antivirus stoped it)
      > > > the icon.ico doesn´t work on vista (on XP some time ago it works so
      > > > nice)
      > > >
      > > > do you know a tutorial on this tasks?
      > > >
      > > > Regards
      > > >
      > > > --- In PanoToolsNG@yahoogroups.com, "Rick Drew" <rick@> wrote:
      > > > >
      > > > > Don't use absolute paths. Edit the HTML code so you only have a
      > > > backslash -
      > > > > \ - not E:\
      > > > >
      > > > >
      > > > >
      > > > > That way it always uses the root relative to the drive, and
      > > > ignores the
      > > > > drive letter.
      > > > >
      > > > >
      > > > >
      > > > > Rick drew
      > > > >
      > > > >
      > > > >
      > > > > From: PanoToolsNG@yahoogroups.com
      > > > [mailto:PanoToolsNG@yahoogroups.com] On
      > > > > Behalf Of felipe
      > > > > Sent: 2010-05-26 8:38 PM
      > > > > To: PanoToolsNG@yahoogroups.com
      > > > > Subject: [PanoToolsNG] tour on CD, how to create the route if the
      > > > unit is
      > > > > not D:
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > Hi, recently a client asked me to create a tour off line, by the
      > > > > distribution on CD, I made my first attemp creating the routes to
      > > > the unit
      > > > > D:
      > > > >
      > > > > When I tried to show it (it worked on two computers at home) on my
      > > > client
      > > > > computer as a demostration, this machine used the units as:
      > > > > C: and D: as local hard disk
      > > > > E: for the CD room.
      > > > >
      > > > > the result = it doesn't work
      > > > >
      > > > > I use to create the tours pano2vr, so how can I create the routes
      > > > to the
      > > > > html files?
      > > > >
      > > > > Thanks
      > > > >
      > > > > Juan Felipe
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > [Non-text portions of this message have been removed]
      > > > >
      > > >
      > > >
      > >
      > >
      > > [Non-text portions of this message have been removed]
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.