Re: [PanoToolsNG] Re: Canon 7D or SONY Alpha 850 - which one would you buy?
- OK OK!!!
I GOT IT!
2009/9/27 Keith Martin <keith@...>
> Sometime around 27/9/09 (at 09:16 +0200) luca vascon said:
> >promote is nikon only...
> Some Promote Systems products are Nikon only, but the Promote Control
> works with Canon as well - as long as you order the right cables.
> Here's a bit from the Promote web site
> The Promote Control is compatible with digital cameras supporting an
> industry standard PTP/MTP protocol for controlling camera functions
> over USB interface. A non-exhaustive list of supported cameras
> includes the following brands and models:
> Nikon: D3, D3X, D2X, D2Xs, D2H, D2Hs, D200, D300, D700, D40, D40x,
> D50, D60, D70, D70s, D80, D90, D5000
> Canon: 1D Mark III, 1Ds Mark III, 5D Mark II, 30D, 40D, 50D, 400D,
> 450D, 500D, 1000D
> NOTE 1: Canon 5D Mk I, 1D/1Ds Mk I and 1D/1Ds Mk II cameras are not
> supported in HDR mode. Only basic operations such as One-Shot,
> Time-Lapse and Manual Hold are available on these cameras, and would
> require a CN3 cable to be connected. Canon 5D Mark II and 1D/1Ds Mark
> III cameras are fully supported, including HDR mode.
> NOTE 2: On Canon 5D Mark II the longest automatic HDR exposure is
> limited to 30 seconds due to mechanical Bulb mode activation. A
> future Promote Control firmware update will prompt to activate Bulb
> mode manually as required. At this time using a higher ISO setting is
> recommended with Canon 5D Mark II if an exposure longer than 30
> seconds is required in HDR mode.
> (It is interesting to see the difference between the original Canon
> 5D and the 5D mkII; only basic ops on the older model.)
> I should be reviewing this for MacUser very soon. USPS tracking says
> 'delivery attempted' at the office...
[Non-text portions of this message have been removed]