- ... If you want a 2 camera spherical solution that is generally useful the NPPs of the two lenses have to be I think no more than say 6cm apart. I have shotMessage 1 of 14 , Mar 31 8:05 AMView Source--- In PanoToolsNG@yahoogroups.com, Jim Watters <jwatters@...> wrote:
>If you want a 2 camera spherical solution that is generally useful the NPPs of the two lenses have to be I think no more than say 6cm apart. I have shot 360 panoramic movies with two Canon5Ds with 10.5mm Nikkors and the results are only ok down to about 3m
> tom_a_sparks wrote:
> > could anybody explain the exact requirements needed?
> > for 2 fisheye setup
> What about Dan Slater's Spherecam
> Jim Watters
Which points towards compact (tethered) sensors and mini-fisheye lenses. It is interesting that the Ephels can be configured with tethered sensors
http://community.elphel.com/pictures/elphel354-10-open.jpg. There are very flat compact (tethered) sensors now but there is a dearth of full featured micro fisheye lenses. the Sunex range is ok, and the fisheye lens that comes with the Gopro Wide is nice but they lack aperture control
Custom fisheye cameras with fisheye prime lenses make more sense I think for single lens video fisheye work where compactness is not so critical. Then you can use cameras like the Sumix 2/3 caamera,and the Fujinon fisheyes
- THANX! It was the result of one year of mad tests... IF you use it with a Nikon (or other 1.5x at least) the overlap is enough to ensure a very, very goodMessage 2 of 14 , Mar 31 9:12 AMView SourceTHANX!
It was the result of one year of mad tests...
IF you use it with a Nikon (or other 1.5x at least) the overlap is
enough to ensure a very, very good stitching.
You can expect some errors and some discontinuity, but if you optimize
also POINT OF VIEW (Ptgui pro 8.0) and use smartblend you can say that
those error are minimized.
You can also (after a proper renaming of folder) have a batch building
(not levelling!) of all panos made that day.
No control points nor optimization required.
I think once you forget nadir perfection and you let some stitching
errors go, you can use the thing within a 6 mts tolerance, going down to
4 with wise orientation of the 3 cameras, smartblend and POV optimizing.
No miracles, but some nice result!
Would like to try with 3 shaved 10.5 on 5d or D700...
Keith Martin ha scritto:
> Sometime around 31/3/09 (at 15:55 +0200) Luca N Vascon said:
> >Want to know the incredible thing? It WORKS
> Yep, that was always one heck of a construction. But would it work
> perfectly in a critical close-quarters situation? Unless we've all
> been fooling ourselves with 'nodal nonsense' then I think not...
> Still impressive engineering though. :-)