[PanoToolsNG] Re:White Balance in Panoramas
- Instead of using transparency gradients, how about a brush with limited
Its much more controllable than the gradients IMO.
Sacha Griffin mentioned this process-
"You can create rgb channel masks, using an alternative white balance for
It's only a 5 second process and works great."
Perhaps you can elaborate on this Sacha? It does sound interesting.
----- Original Message -----
From: "Nelson Mendes" <nmendes@...>
Sent: Thursday, February 28, 2008 3:46 PM
Subject: [PanoToolsNG] Re: Fwd: White Balance in Panoramas
Shawn, that's what I call "time consuming" task. It's more or less the
way I'm doing the corrections (I use Photo Filter Adjustment layers in
CS3 and mask the parts I don't need) but the masks sometimes are hard
to do without using transparency gradients or the edges will show up
on some areas where the WB is correct. I was wondering if anyone had a
different (magic??) approach to this :)
--- In PanoToolsNG@yahoogroups.com, "Shawn Steigner" <owner@...> wrote:
> I use a color(or level) adjustment layer in Photoshop.
> Adding a corrective blue layer for the indoor lights.
> Then using the a mask on this layer to hide where the correction isn't
> Then I'll do the same for the blue-bleed from outside lighting.
> This also works if there is some weird flourecent lights too.
> Sometimes a finished pano as a .PSD file will as many as 5-6 color
> adjustment layers in tough situations.
> There may only be a small bit of each adjustment layer revealed
> mask though.
> Here's a screen shot of the layers pallet on a finished touch-up:
> I learned this from someone on this forum a long time ago.
> Wish I could remember who.
> Thanks to that person is due.