Loading ...
Sorry, an error occurred while loading the content.

Re: [PanoToolsNG] Quick Mount

Expand Messages
  • Eric O'Brien
    What is the benefit of / use for round (circular) ? eo
    Message 1 of 13 , Oct 2, 2007
    • 0 Attachment
      What is the benefit of / use for "round" (circular) ?

      eo

      On Oct 2, 2007, at 12:20 PM, bigwade wrote:

      >
      > Hi All,
      > I am looking for a QuickMount for my panoramic set.
      > I need a ROUND version, about 5-5,5 cm, no flex, top and bottom
      > perfect in
      > line.
      > I thought a http://www.novoflex.de/html_d/fr_ha6.htm would do, but
      > top and
      > bottom are not in line.
      > About 2-3mm off :-(
      > Any ideas ?
      > Have Fun.
      > --
      > View this message in context: http://www.nabble.com/Quick-Mount-
      > tf4557199.html#a13005688
      > Sent from the PanoToolsNG mailing list archive at Nabble.com.
      >
    • AYRTON - avi
      Jook good morning. Please, could you explain to us, *why* upside dow, and *how* you use this . THANKS a lot Ayrton ... -- AYRTON VR Images
      Message 2 of 13 , Oct 3, 2007
      • 0 Attachment
        Jook
        good morning.

        Please,
        could you explain to us,
        *why* upside dow,
        and *how* you use this .

        THANKS a lot
        Ayrton


        On 10/2/07, Jook Leung <jook360@...> wrote:
        > I use this one upside down on my VRDrive:
        >
        > http://www.adorama.com/GTQRP500.html
        >
        >
        >
        > Jook
        >
        >
        >
        > On Oct 2, 2007, at 3:20 PM, bigwade wrote:
        >
        > >
        > > Hi All,
        > > I am looking for a QuickMount for my panoramic set.
        > > I need a ROUND version, about 5-5,5 cm, no flex, top and bottom
        > > perfect in
        > > line.
        > > I thought a http://www.novoflex.de/html_d/fr_ha6.htm would do, but
        > > top and
        > > bottom are not in line.
        > > About 2-3mm off :-(
        > > Any ideas ?
        > > Have Fun.
        > > --
        > > View this message in context: http://www.nabble.com/Quick-Mount-
        > > tf4557199.html#a13005688
        > > Sent from the PanoToolsNG mailing list archive at Nabble.com.
        > >
        > >
        > >
        >
        > Jook Leung Photography
        > 360VR Images - 360 degree Panoramic photography
        > Web: http://360vr.com
        > E-mail: jook@...
        >
        >
        >
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >
        >
        >
        > --
        >
        > Yahoo! Groups Links
        >
        >
        >
        >


        --
        AYRTON VR Images www.ayrton.com
        Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
        Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
        Panoramas do Rio de Janeiro www.rio360.com.br
      • bigwade
        Ideesign Q-top Quick Release, That s what I am looking for (x2) ! but eh, not available. :-( hmmsomethingelse, thanks for the idea. Jook, the Giottos MH 500
        Message 3 of 13 , Oct 3, 2007
        • 0 Attachment
          Ideesign Q-top Quick Release, That's what I am looking for (x2) ! but eh, not
          available. :-(
          hmmsomethingelse, thanks for the idea.
          Jook, the Giottos MH 500 is nice but it has 2 mail screws on both side is
          that so ?
          Indeed the idea is to mount my NN3 arm with base on a Seitz VR rotator via a
          QM adapter,
          (http://tinyurl.com/yt6vvv) but I also want to use the same top on a normal
          rotator so I need a mail/female solution in line.
          (Jook, a 1/4 thread is yet in the drive)
          The Ideesign Q-top Quick Release is perfect.
          Thanks for tips
          Have Fun.


          --
          View this message in context: http://www.nabble.com/Quick-Mount-tf4557199.html#a13025840
          Sent from the PanoToolsNG mailing list archive at Nabble.com.
        • Jook Leung
          Hi Frank, I found the Giottos MH 500 works perfectly for me on the VRDrive . The 1/4 male in the quick release plate (it s reversible) goes into
          Message 4 of 13 , Oct 7, 2007
          • 0 Attachment
            Hi Frank,

            I found the Giottos MH 500 works perfectly for me on the VRDrive
            <upside down>.
            The 1/4 male in the quick release plate (it's reversible) goes into
            the top of the VRDrive.
            The 3/8 male in the other part is now facing up and will go into the
            Nodal Ninja.

            http://www.adorama.com/GTQRP500.html


            Let me know if you like to see a picture.

            Jook


            On Oct 3, 2007, at 3:10 PM, bigwade wrote:

            >
            > Ideesign Q-top Quick Release, That's what I am looking for (x2) !
            > but eh, not
            > available. :-(
            > hmmsomethingelse, thanks for the idea.
            > Jook, the Giottos MH 500 is nice but it has 2 mail screws on both
            > side is
            > that so ?
            > Indeed the idea is to mount my NN3 arm with base on a Seitz VR
            > rotator via a
            > QM adapter,
            > (http://tinyurl.com/yt6vvv) but I also want to use the same top on
            > a normal
            > rotator so I need a mail/female solution in line.
            > (Jook, a 1/4 thread is yet in the drive)
            > The Ideesign Q-top Quick Release is perfect.
            > Thanks for tips
            > Have Fun.
            >
            > --
            > View this message in context: http://www.nabble.com/Quick-Mount-
            > tf4557199.html#a13025840
            > Sent from the PanoToolsNG mailing list archive at Nabble.com.
            >
            >
            >

            Jook Leung Photography
            360VR Images - 360 degree Panoramic photography
            Web: http://360vr.com
            E-mail: jook@...
            Mobile: 201 679 6177





            [Non-text portions of this message have been removed]
          • AYRTON - avi
            ... PLEASE PLEASE show us a photo of it !!! THANKS Jook Ayrton ... -- AYRTON 21-9982.6313 www.ayrton.com Ladeira de Nossa
            Message 5 of 13 , Oct 7, 2007
            • 0 Attachment
              On 10/7/07, Jook Leung <jook360@...> wrote:
              > Hi Frank,
              >
              > I found the Giottos MH 500 works perfectly for me on the VRDrive
              > <upside down>.
              > The 1/4 male in the quick release plate (it's reversible) goes into
              > the top of the VRDrive.
              > The 3/8 male in the other part is now facing up and will go into the
              > Nodal Ninja.
              >
              > http://www.adorama.com/GTQRP500.html
              >
              >
              > Let me know if you like to see a picture.

              PLEASE
              PLEASE
              show us a photo of it !!!

              THANKS Jook

              Ayrton


              >
              > Jook
              >
              >
              > On Oct 3, 2007, at 3:10 PM, bigwade wrote:
              >
              > >
              > > Ideesign Q-top Quick Release, That's what I am looking for (x2) !
              > > but eh, not
              > > available. :-(
              > > hmmsomethingelse, thanks for the idea.
              > > Jook, the Giottos MH 500 is nice but it has 2 mail screws on both
              > > side is
              > > that so ?
              > > Indeed the idea is to mount my NN3 arm with base on a Seitz VR
              > > rotator via a
              > > QM adapter,
              > > (http://tinyurl.com/yt6vvv) but I also want to use the same top on
              > > a normal
              > > rotator so I need a mail/female solution in line.
              > > (Jook, a 1/4 thread is yet in the drive)
              > > The Ideesign Q-top Quick Release is perfect.
              > > Thanks for tips
              > > Have Fun.
              > >
              > > --
              > > View this message in context: http://www.nabble.com/Quick-Mount-
              > > tf4557199.html#a13025840
              > > Sent from the PanoToolsNG mailing list archive at Nabble.com.
              > >
              > >
              > >
              >
              > Jook Leung Photography
              > 360VR Images - 360 degree Panoramic photography
              > Web: http://360vr.com
              > E-mail: jook@...
              > Mobile: 201 679 6177
              >
              >
              >
              >
              >
              > [Non-text portions of this message have been removed]
              >
              >
              >
              > --
              >
              > Yahoo! Groups Links
              >
              >
              >
              >


              --
              AYRTON 21-9982.6313 www.ayrton.com
              Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
              Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
              Panoramas do Rio de Janeiro www.rio360.com.br
            • Jook Leung
              Here are some photos: Looks like I have the Giottos MH-200 (53mm dia) http://360vr.com/misc/VRDrive_QR_MG_9761.jpg http://360vr.com/misc/VRDrive_QR_MG_9766.jpg
              Message 6 of 13 , Oct 8, 2007
              • 0 Attachment
                Here are some photos:

                Looks like I have the Giottos MH-200 (53mm dia)

                http://360vr.com/misc/VRDrive_QR_MG_9761.jpg
                http://360vr.com/misc/VRDrive_QR_MG_9766.jpg
                http://360vr.com/misc/VRDrive_QR_MG_9769.jpg

                There is a replacement for the Giottos MH-500 with a female threaded
                base here:
                http://www.goshotcamera.com/product/TQR001RMH500
                and cheap for $15


                Jook



                On Oct 7, 2007, at 8:36 PM, AYRTON - avi wrote:

                > On 10/7/07, Jook Leung <jook360@...> wrote:
                > > Hi Frank,
                > >
                > > I found the Giottos MH 500 works perfectly for me on the VRDrive
                > > <upside down>.
                > > The 1/4 male in the quick release plate (it's reversible) goes into
                > > the top of the VRDrive.
                > > The 3/8 male in the other part is now facing up and will go into the
                > > Nodal Ninja.
                > >
                > > http://www.adorama.com/GTQRP500.html
                > >
                > >
                > > Let me know if you like to see a picture.
                >
                > PLEASE
                > PLEASE
                > show us a photo of it !!!
                >
                > THANKS Jook
                >
                > Ayrton
                >
                > >
                > > Jook
                > >
                > >
                > > On Oct 3, 2007, at 3:10 PM, bigwade wrote:
                > >
                > > >
                > > > Ideesign Q-top Quick Release, That's what I am looking for (x2) !
                > > > but eh, not
                > > > available. :-(
                > > > hmmsomethingelse, thanks for the idea.
                > > > Jook, the Giottos MH 500 is nice but it has 2 mail screws on both
                > > > side is
                > > > that so ?
                > > > Indeed the idea is to mount my NN3 arm with base on a Seitz VR
                > > > rotator via a
                > > > QM adapter,
                > > > (http://tinyurl.com/yt6vvv) but I also want to use the same top on
                > > > a normal
                > > > rotator so I need a mail/female solution in line.
                > > > (Jook, a 1/4 thread is yet in the drive)
                > > > The Ideesign Q-top Quick Release is perfect.
                > > > Thanks for tips
                > > > Have Fun.
                > > >
                > > > --
                > > > View this message in context: http://www.nabble.com/Quick-Mount-
                > > > tf4557199.html#a13025840
                > > > Sent from the PanoToolsNG mailing list archive at Nabble.com.
                > > >
                > > >
                > > >
                > >
                > > Jook Leung Photography
                > > 360VR Images - 360 degree Panoramic photography
                > > Web: http://360vr.com
                > > E-mail: jook@...
                > > Mobile: 201 679 6177
                > >
                > >
                > >
                > >
                > >
                > > [Non-text portions of this message have been removed]
                > >
                > >
                > >
                > > --
                > >
                > > Yahoo! Groups Links
                > >
                > >
                > >
                > >
                >
                > --
                > AYRTON 21-9982.6313 www.ayrton.com
                > Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
                > Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
                > Panoramas do Rio de Janeiro www.rio360.com.br
                >
                >

                Jook Leung Photography
                360VR Images - 360 degree Panoramic photography
                Web: http://360vr.com
                E-mail: jook@...
                Mobile: 201 679 6177





                [Non-text portions of this message have been removed]
              • AYRTON - avi
                Hey THANKS for sharing Now I get it :-) AYRTON ... -- AYRTON 21-9982.6313 www.ayrton.com Ladeira de Nossa Senhora, 214 / sl.
                Message 7 of 13 , Oct 8, 2007
                • 0 Attachment
                  Hey
                  THANKS for sharing
                  Now I get it :-)

                  AYRTON


                  On 10/8/07, Jook Leung <jook360@...> wrote:
                  > Here are some photos:
                  >
                  > Looks like I have the Giottos MH-200 (53mm dia)
                  >
                  > http://360vr.com/misc/VRDrive_QR_MG_9761.jpg
                  > http://360vr.com/misc/VRDrive_QR_MG_9766.jpg
                  > http://360vr.com/misc/VRDrive_QR_MG_9769.jpg
                  >
                  > There is a replacement for the Giottos MH-500 with a female threaded
                  > base here:
                  > http://www.goshotcamera.com/product/TQR001RMH500
                  > and cheap for $15
                  >
                  >
                  > Jook
                  >
                  >
                  >
                  >
                  > On Oct 7, 2007, at 8:36 PM, AYRTON - avi wrote:
                  >
                  > > On 10/7/07, Jook Leung <jook360@...> wrote:
                  > > > Hi Frank,
                  > > >
                  > > > I found the Giottos MH 500 works perfectly for me on the VRDrive
                  > > > <upside down>.
                  > > > The 1/4 male in the quick release plate (it's reversible) goes into
                  > > > the top of the VRDrive.
                  > > > The 3/8 male in the other part is now facing up and will go into the
                  > > > Nodal Ninja.
                  > > >
                  > > > http://www.adorama.com/GTQRP500.html
                  > > >
                  > > >
                  > > > Let me know if you like to see a picture.
                  > >
                  > > PLEASE
                  > > PLEASE
                  > > show us a photo of it !!!
                  > >
                  > > THANKS Jook
                  > >
                  > > Ayrton
                  > >
                  > > >
                  > > > Jook
                  > > >
                  > > >
                  > > > On Oct 3, 2007, at 3:10 PM, bigwade wrote:
                  > > >
                  > > > >
                  > > > > Ideesign Q-top Quick Release, That's what I am looking for (x2) !
                  > > > > but eh, not
                  > > > > available. :-(
                  > > > > hmmsomethingelse, thanks for the idea.
                  > > > > Jook, the Giottos MH 500 is nice but it has 2 mail screws on both
                  > > > > side is
                  > > > > that so ?
                  > > > > Indeed the idea is to mount my NN3 arm with base on a Seitz VR
                  > > > > rotator via a
                  > > > > QM adapter,
                  > > > > (http://tinyurl.com/yt6vvv) but I also want to use the same top on
                  > > > > a normal
                  > > > > rotator so I need a mail/female solution in line.
                  > > > > (Jook, a 1/4 thread is yet in the drive)
                  > > > > The Ideesign Q-top Quick Release is perfect.
                  > > > > Thanks for tips
                  > > > > Have Fun.
                  > > > >
                  > > > > --
                  > > > > View this message in context: http://www.nabble.com/Quick-Mount-
                  > > > > tf4557199.html#a13025840
                  > > > > Sent from the PanoToolsNG mailing list archive at Nabble.com.
                  > > > >
                  > > > >
                  > > > >
                  > > >
                  > > > Jook Leung Photography
                  > > > 360VR Images - 360 degree Panoramic photography
                  > > > Web: http://360vr.com
                  > > > E-mail: jook@...
                  > > > Mobile: 201 679 6177
                  > > >
                  > > >
                  > > >
                  > > >
                  > > >
                  > > > [Non-text portions of this message have been removed]
                  > > >
                  > > >
                  > > >
                  > > > --
                  > > >
                  >
                  > > > Yahoo! Groups Links
                  > > >
                  > > >
                  > > >
                  > > >
                  > >
                  > > --
                  > > AYRTON 21-9982.6313 www.ayrton.com
                  > > Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
                  > > Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
                  > > Panoramas do Rio de Janeiro www.rio360.com.br
                  > >
                  > >
                  >
                  > Jook Leung Photography
                  > 360VR Images - 360 degree Panoramic photography
                  > Web: http://360vr.com
                  > E-mail: jook@...
                  > Mobile: 201 679 6177
                  >
                  >
                  >
                  >
                  >
                  > [Non-text portions of this message have been removed]
                  >
                  >
                  >
                  > --
                  >
                  > Yahoo! Groups Links
                  >
                  >
                  >
                  >


                  --
                  AYRTON 21-9982.6313 www.ayrton.com
                  Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
                  Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
                  Panoramas do Rio de Janeiro www.rio360.com.br
                • bigwade
                  Hi Jook, thanks for sharing. esp. the goshotcameratool was what I was looking for. In the mean time I found someone who has access to some old stock of these:
                  Message 8 of 13 , Oct 9, 2007
                  • 0 Attachment
                    Hi Jook,
                    thanks for sharing.
                    esp. the goshotcameratool was what I was looking for.
                    In the mean time I found someone who has access to some old stock of these:
                    http://tinyurl.com/23ojhx
                    Ordered 2, have to wait and see.....
                    Have Fun !
                    Frank







                    Jook Leung wrote:
                    >
                    > Here are some photos:
                    >
                    > Looks like I have the Giottos MH-200 (53mm dia)
                    >
                    > http://360vr.com/misc/VRDrive_QR_MG_9761.jpg
                    > http://360vr.com/misc/VRDrive_QR_MG_9766.jpg
                    > http://360vr.com/misc/VRDrive_QR_MG_9769.jpg
                    >
                    > There is a replacement for the Giottos MH-500 with a female threaded
                    > base here:
                    > http://www.goshotcamera.com/product/TQR001RMH500
                    > and cheap for $15
                    >
                    >
                    > Jook
                    >
                    >
                    >
                    > On Oct 7, 2007, at 8:36 PM, AYRTON - avi wrote:
                    >
                    >> On 10/7/07, Jook Leung <jook360@...> wrote:
                    >> > Hi Frank,
                    >> >
                    >> > I found the Giottos MH 500 works perfectly for me on the VRDrive
                    >> > <upside down>.
                    >> > The 1/4 male in the quick release plate (it's reversible) goes into
                    >> > the top of the VRDrive.
                    >> > The 3/8 male in the other part is now facing up and will go into the
                    >> > Nodal Ninja.
                    >> >
                    >> > http://www.adorama.com/GTQRP500.html
                    >> >
                    >> >
                    >> > Let me know if you like to see a picture.
                    >>
                    >> PLEASE
                    >> PLEASE
                    >> show us a photo of it !!!
                    >>
                    >> THANKS Jook
                    >>
                    >> Ayrton
                    >>
                    >> >
                    >> > Jook
                    >> >
                    >> >
                    >> > On Oct 3, 2007, at 3:10 PM, bigwade wrote:
                    >> >
                    >> > >
                    >> > > Ideesign Q-top Quick Release, That's what I am looking for (x2) !
                    >> > > but eh, not
                    >> > > available. :-(
                    >> > > hmmsomethingelse, thanks for the idea.
                    >> > > Jook, the Giottos MH 500 is nice but it has 2 mail screws on both
                    >> > > side is
                    >> > > that so ?
                    >> > > Indeed the idea is to mount my NN3 arm with base on a Seitz VR
                    >> > > rotator via a
                    >> > > QM adapter,
                    >> > > (http://tinyurl.com/yt6vvv) but I also want to use the same top on
                    >> > > a normal
                    >> > > rotator so I need a mail/female solution in line.
                    >> > > (Jook, a 1/4 thread is yet in the drive)
                    >> > > The Ideesign Q-top Quick Release is perfect.
                    >> > > Thanks for tips
                    >> > > Have Fun.
                    >> > >
                    >> > > --
                    >> > > View this message in context: http://www.nabble.com/Quick-Mount-
                    >> > > tf4557199.html#a13025840
                    >> > > Sent from the PanoToolsNG mailing list archive at Nabble.com.
                    >> > >
                    >> > >
                    >> > >
                    >> >
                    >> > Jook Leung Photography
                    >> > 360VR Images - 360 degree Panoramic photography
                    >> > Web: http://360vr.com
                    >> > E-mail: jook@...
                    >> > Mobile: 201 679 6177
                    >> >
                    >> >
                    >> >
                    >> >
                    >> >
                    >> > [Non-text portions of this message have been removed]
                    >> >
                    >> >
                    >> >
                    >> > --
                    >> >
                    >> > Yahoo! Groups Links
                    >> >
                    >> >
                    >> >
                    >> >
                    >>
                    >> --
                    >> AYRTON 21-9982.6313 www.ayrton.com
                    >> Ladeira de Nossa Senhora, 214 / sl. 101 www.vrfolio.com
                    >> Outeiro da Glória - RJ - 22211-100 - Brasil www.vr-images.com
                    >> Panoramas do Rio de Janeiro www.rio360.com.br
                    >>
                    >>
                    >
                    > Jook Leung Photography
                    > 360VR Images - 360 degree Panoramic photography
                    > Web: http://360vr.com
                    > E-mail: jook@...
                    > Mobile: 201 679 6177
                    >
                    >
                    >
                    >
                    >
                    > [Non-text portions of this message have been removed]
                    >
                    >
                    >

                    --
                    View this message in context: http://www.nabble.com/Quick-Mount-tf4557199.html#a13122706
                    Sent from the PanoToolsNG mailing list archive at Nabble.com.
                  • bigwade
                    Hi, I ve got some private mails about the Ideesign Quick Mounts. To help you, look at: http://tinyurl.com/2ycv6t http://tinyurl.com/3cu5lq btw I have no
                    Message 9 of 13 , Oct 11, 2007
                    • 0 Attachment
                      Hi,
                      I've got some private mails about the Ideesign Quick Mounts.
                      To help you, look at:


                      http://tinyurl.com/2ycv6t

                      http://tinyurl.com/3cu5lq

                      btw I have no commercial connections !
                      Have Fun
                      Frank

                      --
                      View this message in context: http://www.nabble.com/Quick-Mount-tf4557199.html#a13166043
                      Sent from the PanoToolsNG mailing list archive at Nabble.com.
                    • bigwade
                      Update: I got the 2 Ideesign QM ts but unfortunally the base 3/8 female isn t centered perfectly. 1,2 mm off..... For the rest it s perfect ! and very strong
                      Message 10 of 13 , Oct 29, 2007
                      • 0 Attachment
                        Update:
                        I got the 2 Ideesign QM'ts but unfortunally the base 3/8 female isn't
                        centered perfectly. 1,2 mm off.....
                        For the rest it's perfect ! and very strong
                        With a new productionrun it could/should be centered. ( so it can be used ON
                        a rotator like the Seitz)
                        Peter Emmerich from Germany wants to do that but a new productionrun has to
                        be around 200-300 units.
                        http://www.pepd.de/27.htm
                        The old stock is perfect for under a small rotator like the Ninja !!

                        For Jook,
                        Got the Giottos MH-200 and it's fine on a Seitz
                        The 1/4 screw was somewhat short so I replaced that with a 1/4 threat +
                        1/4>3/8 adapter.
                        So I found out when removing the 1/4 screw in the "normal upper part" a
                        femaile 3/8 came available.
                        So a MH-200 can be used (upside down) on any tripod with a 3/8 mail
                        connection, hey, and that's nice too.
                        Have Fun
                        Frank
                        --
                        View this message in context: http://www.nabble.com/Quick-Mount-tf4557199.html#a13477975
                        Sent from the PanoToolsNG mailing list archive at Nabble.com.
                      Your message has been successfully submitted and would be delivered to recipients shortly.