Loading ...
Sorry, an error occurred while loading the content.

Re: [PanoToolsNG] Re: Processor Speedtest

Expand Messages
  • Pat Swovelin
    ... Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)? ... Pat Swovelin Cool Guy @ Large
    Message 1 of 68 , Aug 4, 2007
    • 0 Attachment
      On 8/4/2007 6:34 AM, Hans Nyberg rambled on about ...:
      > --- In PanoToolsNG@yahoogroups.com, "erik leeman" <erik.leeman@...> wrote:
      >> I did some more runs to see if the results were reliable.
      >> Not very I'd say now. The spread is just to wide between runs with
      >> identical settings : (
      >
      > Well I just discovered what seems to be a bug in either panotools or
      > PTGui Windows.
      > PTGui 7.2 Panotools from Joost and the fast pano12.dll from Jim Watters
      >
      > Try this.
      > 1. Stitch using PTgui but warp with panotools. no fast transform
      > 2. Just book the use fast transform and stitch again without
      > restarting PTgui
      > 3. unbook fast transform and stitch without restarting PTGui
      > 4. Save the last settings and close. open again and stitch.
      >
      > You will see that the fast transform reduces time with around 30% but
      > it does not change
      > back to No fast transform before you save it and restart,
      >
      > On Mac the fast transform does not have any effect at all with
      > panotools warping, only
      > with PTgui

      Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)?

      > Hans




      Pat Swovelin
      Cool Guy @ Large
    • Hans Nyberg
      ... I do not have the Pro version, only tested PTGui 7.2 Hans
      Message 68 of 68 , Aug 4, 2007
      • 0 Attachment
        --- In PanoToolsNG@yahoogroups.com, Pat Swovelin <Panoramas@...> wrote:
        >
        > On 8/4/2007 6:34 AM, Hans Nyberg rambled on about ...:
        > > --- In PanoToolsNG@yahoogroups.com, "erik leeman" <erik.leeman@> wrote:
        > >> I did some more runs to see if the results were reliable.
        > >> Not very I'd say now. The spread is just to wide between runs with
        > >> identical settings : (
        > >
        > > Well I just discovered what seems to be a bug in either panotools or
        > > PTGui Windows.
        > > PTGui 7.2 Panotools from Joost and the fast pano12.dll from Jim Watters
        > >
        > > Try this.
        > > 1. Stitch using PTgui but warp with panotools. no fast transform
        > > 2. Just book the use fast transform and stitch again without
        > > restarting PTgui
        > > 3. unbook fast transform and stitch without restarting PTGui
        > > 4. Save the last settings and close. open again and stitch.
        > >
        > > You will see that the fast transform reduces time with around 30% but
        > > it does not change
        > > back to No fast transform before you save it and restart,
        > >
        > > On Mac the fast transform does not have any effect at all with
        > > panotools warping, only
        > > with PTgui
        >
        > Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)?

        I do not have the Pro version, only tested PTGui 7.2

        Hans
      Your message has been successfully submitted and would be delivered to recipients shortly.