Re: Processor Speedtest
- Here is another Mac.
My old 1ghz Powerbook17 from 2003.
Machine Model: PowerBook G4 17"
CPU Type: PowerPC G4 (3.3)
Number Of CPUs: 1
CPU Speed: 1 GHz
L2 Cache (per CPU): 256 KB
L3 Cache (per CPU): 1 MB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.6.2f1
System Version: Mac OS X 10.3.9
Kernel Version: Darwin 7.9.0
Capacity: 55.89 GB
Model: TOSHIBA MK6021GAS
1 run without reboot. Machine had been running for about a week but only used for
browsing the web.
Time 4 min 02 sec
1st run 3.30
2nd run 3.32
- --- In PanoToolsNG@yahoogroups.com, Pat Swovelin <Panoramas@...> wrote:
>I do not have the Pro version, only tested PTGui 7.2
> On 8/4/2007 6:34 AM, Hans Nyberg rambled on about ...:
> > --- In PanoToolsNG@yahoogroups.com, "erik leeman" <erik.leeman@> wrote:
> >> I did some more runs to see if the results were reliable.
> >> Not very I'd say now. The spread is just to wide between runs with
> >> identical settings : (
> > Well I just discovered what seems to be a bug in either panotools or
> > PTGui Windows.
> > PTGui 7.2 Panotools from Joost and the fast pano12.dll from Jim Watters
> > Try this.
> > 1. Stitch using PTgui but warp with panotools. no fast transform
> > 2. Just book the use fast transform and stitch again without
> > restarting PTgui
> > 3. unbook fast transform and stitch without restarting PTGui
> > 4. Save the last settings and close. open again and stitch.
> > You will see that the fast transform reduces time with around 30% but
> > it does not change
> > back to No fast transform before you save it and restart,
> > On Mac the fast transform does not have any effect at all with
> > panotools warping, only
> > with PTgui
> Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)?