Loading ...
Sorry, an error occurred while loading the content.

Re: Processor Speedtest

Expand Messages
  • Hans Nyberg
    Here is another Mac. My old 1ghz Powerbook17 from 2003. Machine Model: PowerBook G4 17 CPU Type: PowerPC G4 (3.3) Number Of CPUs: 1 CPU Speed: 1 GHz L2 Cache
    Message 1 of 68 , Aug 2, 2007
    • 0 Attachment
      Here is another Mac.
      My old 1ghz Powerbook17 from 2003.

      Machine Model: PowerBook G4 17"
      CPU Type: PowerPC G4 (3.3)
      Number Of CPUs: 1
      CPU Speed: 1 GHz
      L2 Cache (per CPU): 256 KB
      L3 Cache (per CPU): 1 MB
      Memory: 1 GB
      Bus Speed: 167 MHz
      Boot ROM Version: 4.6.2f1

      System Version: Mac OS X 10.3.9
      Kernel Version: Darwin 7.9.0

      Harddisc:
      Capacity: 55.89 GB
      Model: TOSHIBA MK6021GAS
      4,200rpm
      Protocol: ATA

      PTGui 7.2
      1 run without reboot. Machine had been running for about a week but only used for
      browsing the web.

      Time 4 min 02 sec

      after reboot

      1st run 3.30
      2nd run 3.32

      speedtest.tif 68mb

      Hans
      www.panoramas.dk
    • Hans Nyberg
      ... I do not have the Pro version, only tested PTGui 7.2 Hans
      Message 68 of 68 , Aug 4, 2007
      • 0 Attachment
        --- In PanoToolsNG@yahoogroups.com, Pat Swovelin <Panoramas@...> wrote:
        >
        > On 8/4/2007 6:34 AM, Hans Nyberg rambled on about ...:
        > > --- In PanoToolsNG@yahoogroups.com, "erik leeman" <erik.leeman@> wrote:
        > >> I did some more runs to see if the results were reliable.
        > >> Not very I'd say now. The spread is just to wide between runs with
        > >> identical settings : (
        > >
        > > Well I just discovered what seems to be a bug in either panotools or
        > > PTGui Windows.
        > > PTGui 7.2 Panotools from Joost and the fast pano12.dll from Jim Watters
        > >
        > > Try this.
        > > 1. Stitch using PTgui but warp with panotools. no fast transform
        > > 2. Just book the use fast transform and stitch again without
        > > restarting PTgui
        > > 3. unbook fast transform and stitch without restarting PTGui
        > > 4. Save the last settings and close. open again and stitch.
        > >
        > > You will see that the fast transform reduces time with around 30% but
        > > it does not change
        > > back to No fast transform before you save it and restart,
        > >
        > > On Mac the fast transform does not have any effect at all with
        > > panotools warping, only
        > > with PTgui
        >
        > Was this with PTGui 7.2 or PTGui Pro 7.2 (there may be a difference)?

        I do not have the Pro version, only tested PTGui 7.2

        Hans
      Your message has been successfully submitted and would be delivered to recipients shortly.