Re: [PPLetterpress] Re: [base dimensions.]
- I print mostly invitations and do everything with something like a
6X6. If something is slightly longer I can turn the plate and print
at an angle, up to 45 degrees. If I need to I can lock in some blocks
of aluminum I machined to the same height as the Bunting base and the
plate does quite well hanging over on that extended base.
On Oct 5, 2006, at 2:55 PM, David Michael McNamara wrote:
> Thanks for your response. I'm mostly looking for the sizes people
> find most useful. I suppose it doesn't much matter since I can lock
> up the portions in any combination that is needed, provided room
> for the pins and grippers (which is the main part of my
> Upgrading isn't an option at the moment, unfortunately. And since I
> use mostly lead, I don't think I want to drill the base into the
> I thank you for your suggestions, though. I think I'll just have to
> go with some arbitrary sizes and look for solutions as problems
> present themselves.