Loading ...
Sorry, an error occurred while loading the content.
 

Re: 13 X 18 Windmill Steel Rider Rollers

Expand Messages
  • elumdesigns
    Thanks for the offer Vladimir. I found what I was looking for. Took a while but I eventually got it. ... email it to ...
    Message 1 of 7 , Sep 1, 2006
      Thanks for the offer Vladimir. I found what I was looking for. Took
      a while but I eventually got it.

      --- In PPLetterpress@yahoogroups.com, "Vladimir Semionovas"
      <semionova@...> wrote:
      >
      > Hi brad.
      >
      > I think I have the manual you are looking for, I can scan it and
      email it to
      > you on Monday (it is at work)
      >
      > Let me know if you still need it by then
      >
      > Vladimir
      >
      >
      >
      > From: PPLetterpress@yahoogroups.com
      [mailto:PPLetterpress@yahoogroups.com]
      > On Behalf Of richardtheroadie
      > Sent: Friday, 1 September 2006 5:13 PM
      > To: PPLetterpress@yahoogroups.com
      > Subject: [PPLetterpress] Re: 13 X 18 Windmill Steel Rider Rollers
      >
      >
      >
      >
      >
      > >Have you tried boxcarpress.com. They have alot of manuals online. I
      checked
      > but didn't
      > know which one you had. Good luck, I got mine on ebay.
      >
      > Richard
      >
      > > I am looking into purchasing a 13 x 18 windmill and am having a hard
      > > time locating a parts manual on this machine. If anyone has one and
      > > can give me a call I would really appreciate it. I don't want your
      > > manual, I just need a part number.
      > >
      > > I am looking to see if I can buy the attachent for the Steel Rider
      > > rollers as an aftermarket item and put it on the machine that i want
      > > to buy. I am having a very hard time getting information about this
      > > part and whether it exists or not. From what I understand, some
      > > machines came with the steel riders and some didnt, it was an upgrade
      > > to the GT Platens.
      > >
      > > These Steel Riders basically eliminate "ghosting" when doing high
      > > coverage printing. The parts in question look like small arms that fit
      > > inbetween the 1 and 2 roller and the 2 and 3 roller. The Diagram can
      > > be seen in the Operation Manual for the 10 x 15 and 13 x 18 on
      page 113.
      > >
      > > Help!
      > >
      > > Thanks
      > > Brad
      > > 858 453 4500 x 15
      > >
      >
      >
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
    • Vladimir Semionovas
      Ok. But if you need anything in the future, just ask. Vladimir From: PPLetterpress@yahoogroups.com [mailto:PPLetterpress@yahoogroups.com] On Behalf Of
      Message 2 of 7 , Sep 2, 2006
        Ok.

        But if you need anything in the future, just ask.

        Vladimir



        From: PPLetterpress@yahoogroups.com [mailto:PPLetterpress@yahoogroups.com]
        On Behalf Of elumdesigns
        Sent: Saturday, 2 September 2006 2:39 AM
        To: PPLetterpress@yahoogroups.com
        Subject: [PPLetterpress] Re: 13 X 18 Windmill Steel Rider Rollers



        Thanks for the offer Vladimir. I found what I was looking for. Took
        a while but I eventually got it.

        --- In PPLetterpress@yahoogroups.com
        <mailto:PPLetterpress%40yahoogroups.com> , "Vladimir Semionovas"
        <semionova@...> wrote:
        >
        > Hi brad.
        >
        > I think I have the manual you are looking for, I can scan it and
        email it to
        > you on Monday (it is at work)
        >
        > Let me know if you still need it by then
        >
        > Vladimir
        >
        >
        >
        > From: PPLetterpress@yahoogroups.com
        <mailto:PPLetterpress%40yahoogroups.com>
        [mailto:PPLetterpress@yahoogroups.com
        <mailto:PPLetterpress%40yahoogroups.com> ]
        > On Behalf Of richardtheroadie
        > Sent: Friday, 1 September 2006 5:13 PM
        > To: PPLetterpress@yahoogroups.com <mailto:PPLetterpress%40yahoogroups.com>

        > Subject: [PPLetterpress] Re: 13 X 18 Windmill Steel Rider Rollers
        >
        >
        >
        >
        >
        > >Have you tried boxcarpress.com. They have alot of manuals online. I
        checked
        > but didn't
        > know which one you had. Good luck, I got mine on ebay.
        >
        > Richard
        >
        > > I am looking into purchasing a 13 x 18 windmill and am having a hard
        > > time locating a parts manual on this machine. If anyone has one and
        > > can give me a call I would really appreciate it. I don't want your
        > > manual, I just need a part number.
        > >
        > > I am looking to see if I can buy the attachent for the Steel Rider
        > > rollers as an aftermarket item and put it on the machine that i want
        > > to buy. I am having a very hard time getting information about this
        > > part and whether it exists or not. From what I understand, some
        > > machines came with the steel riders and some didnt, it was an upgrade
        > > to the GT Platens.
        > >
        > > These Steel Riders basically eliminate "ghosting" when doing high
        > > coverage printing. The parts in question look like small arms that fit
        > > inbetween the 1 and 2 roller and the 2 and 3 roller. The Diagram can
        > > be seen in the Operation Manual for the 10 x 15 and 13 x 18 on
        page 113.
        > >
        > > Help!
        > >
        > > Thanks
        > > Brad
        > > 858 453 4500 x 15
        > >
        >
        >
        >
        >
        >
        > [Non-text portions of this message have been removed]
        >





        [Non-text portions of this message have been removed]
      Your message has been successfully submitted and would be delivered to recipients shortly.