Re: [PPLetterpress] Digest Number 179
- Take a look at http://www.granthams.com/page2.html for a description, with
pictures... I frequently use this liquid photopolymer to make small plates
with my home-made 4-bulb 40 watt florescent light box to expose the
polymer -- I sandwich the laserjet printed negative, with liquid
photopolymer poured over it and another acetate sheet on top between two
pieces of 1/4" glass held together and apart by self-adhesive magnet strips
on both pieces -- then expose the 'back' for 4 minutes, flip it and expose
the 'front' for 4 minutes, wash it out and expose it another 4 minutes and
I'm done... Lights are about 4" above the polymer during exposure.
At 10:10 AM 5/15/2002 +0000, you wrote:
>Subject: Re: [PPLetterpress] Aging plates?Mike Lyon
>You expose polymer with 40 Watt lamps? What exposure times do you use with
>this setup, Joel? Are you referring to regular purple looking
>"blacklights?" I didn't think such a low wattage setup would work very well
>even with hours of exposure. Can you give us a product descritption as
>printed on the bulbs you use and a little more detail as to your process?
>For what it's worth my cheapo homemade lamp setup is just a Sylvania "Sun
>Gun" that uses a 650 watt "DWY" halogen photo optic lamp. The lamps come
>with a warning that the bulb emits UV radiation and that you should not look
>directly into the fixture. You can usually find these used on ebay for $10
>to $15 and they will expose polymer very nicely in about 30 minutes time
>from about four feet back. I think both the original Sylvania Sun Gun and
>the Sun Gun 2 both use the same DWY lamp.