Loading ...
Sorry, an error occurred while loading the content.

Re: [PPLetterpress] Setting traps

Expand Messages
  • Harold Kyle
    1/4 point if you¹re confident of very accurate register or 1/2 point if you want to play it safe and the artwork allows. Trapping is often done in the film
    Message 1 of 5 , Jan 30, 2006
    • 0 Attachment
      1/4 point if you¹re confident of very accurate register or 1/2 point if you
      want to play it safe and the artwork allows. Trapping is often done in the
      film output stage of the process, so you may want check with your processor
      to see if you can avoid the extra work of manually trapping.

      Hope this helps,
      Harold

      On 1/29/06 1:57 PM, "mzslb" <mzslb@...> wrote:

      What's a good rule of thumb point size when setting traps in regards
      > to letterpress?


      Boxcar Press
      Fine Printing / Digital Letterpress Supplies
      Delavan Center / 501 W. Fayette St. / Studio 222 / Syracuse, NY 13204
      315-473-0930 phone / 315-473-0967 fax / www.boxcarpress.com



      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.