Loading ...
Sorry, an error occurred while loading the content.

RE: [PPLetterpress] Heidelberg advice (inks)

Expand Messages
  • Michael T. Metz
    Thanks Z. I wasn t clear if you were refering to distance or material. Regards, Mike ... From: Zida Borcich [mailto:zida@studio-z.com] Sent: Tuesday, October
    Message 1 of 5 , Oct 14, 2003
    • 0 Attachment
      Thanks Z. I wasn't clear if you were refering to distance
      or material.

      Regards,
      Mike

      -----Original Message-----
      From: Zida Borcich [mailto:zida@...]
      Sent: Tuesday, October 14, 2003 8:53 PM
      To: PPLetterpress@yahoogroups.com
      Subject: Re: [PPLetterpress] Heidelberg advice (inks)


      M

      I mean that type high is not always exactly type high and
      it's necessary to move the rollers closer for the shorter
      things and farther way for the taller ones. I have a bunch
      of small magnets plus a 6 x 9 one that I piece together
      on various jobs and one of them is definitely not as high
      as all the other ones. I had to stick a shim under it to
      bring it up to the height of the others. Different types
      can be totally different heights, depending on how many
      "life-of-the-printer" lifetimes they have been through,
      who did the casting, and I don't know what all.
      Tom or Mats was talking about using tape to move the
      rollers in and out and that's what this refers to.

      Hope this explains my meaning.

      Z

      "Michael T. Metz" wrote:

      > Dear Z:
      >
      > Could you expand on the following statement?
      >
      > Thank you.
      > Mike
      > -------------------
      >
      > You definitely do have to adjust them for various
      > media -- type or poly or even two different magnets
      > all seem to differ enough to modify the end result.
      >
      > Z
      >
      >  To respond to a post or post a message to the membership:
      > PPLetterpress@yahoogroups.com
      >  Encountering problems? contact:
      > PPLetterpress-owner@yahoogroups.com
      >  To unsubscribe:
      > PPLetterpress-unsubscribe@yahoogroups.com
      >
      > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
      >
      >
      > • To respond to a post or post a message to the membership:
      > PPLetterpress@yahoogroups.com
      > • Encountering problems? contact:
      > PPLetterpress-owner@yahoogroups.com
      > • To unsubscribe:
      > PPLetterpress-unsubscribe@yahoogroups.com
      >
      > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

      --
      STUDIO Z MENDOCINO
      Graphic Design & Fine Letterpress & Offset Printing
      Visit our fabulous new web site at
      http://www.studio-z.com
      Tel: 707.964.2522 Fax 707.964.0850




      • To respond to a post or post a message to the membership:
      PPLetterpress@yahoogroups.com
      • Encountering problems? contact:
      PPLetterpress-owner@yahoogroups.com
      • To unsubscribe:
      PPLetterpress-unsubscribe@yahoogroups.com

      Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
    Your message has been successfully submitted and would be delivered to recipients shortly.