Re: [PPLetterpress] Re: Letterpress papers
- One word of caution with the French Construction papers (which I
do love), they will fade over time (often very quickly). Just an
FYI if that's a concern for you.
On 12/14/09 at 10:07 AM, casey@... (CaseyM) wrote:
>You indicated you wanted to print images with text. Does that
>mean broadsides/posters, fine printing, invitations, book arts, etc...?
>The responses on paper so far are excellent. However, if you
>want to print posters I would recommend, Mohawk Renewal, French
>Paper Muscle-tone, Pop-tone, or Construction, and Carnival.
- Thank you all for your recommendations. I see I have a lot of experimenting to do but this is a good start.
Professor of Art
New Jersey City University
[Non-text portions of this message have been removed]
- Hi again Mary-Ellen,
I see that Elisabeth Long picked up on some of your other questions (her post is
under the heading "Re: Digest No. 2404"). I wanted to draw attention to a couple
more for you:
Yes, there are other ways aside from polymer plates to print images letterpress.
You can have copper or magnesium plates made, or you might be able to find
vintage cuts that suit your design. You also can print from linoleum blocks,
wood engravings -- really, just about anything you can get type-high (0.918
inches) can be printed. Jens Hansen has printed from reglets and furniture (see
Kerri Cushman has printed her apron strings (see No. 14 on this page of the
Vandercook centenary prints:
http://vandercookpress.info/vanderblog/bundle-gallery/); and I seem to recall a
discussion on Letpress about printing from unusual materials, such as leaves.
As for combining letterpress and silkscreen, I can tell you that Arches 88, a
paper designed for silkscreen, also works nicely for letterpress. It needs to be
dampened, though -- but not very much! It's unsized and so absorbs water in a
shocking way. It also has a very smooth surface that is somewhat undone by
dampening. I don't know anything about silkscreen printing. I'm wondering if the
paper can be dampened after the screen print is pulled -- anybody?
I hope you'll keep us posted on your progress!
--- In PPLetterpress@yahoogroups.com, "mellen" <camsoupy@...> wrote:
> Any other recommendations for getting imagery in besides polymer plates?...
Also interested in combining silkscreen and letterpress.