Loading ...
Sorry, an error occurred while loading the content.

Messages List

11848

Wiring diagram needed for the Orion Single shot colour DSI PRo II

Hi guys Does anybody have a wiring diagram for this camera? I think I've identified the problem (see the attached picture). The component labelled as "U18"
Neil Allison
10:02 PM
#11848
This message has attachments
  • JPG
    2 MB
11847

Re: Starshoot II DSCI

I bought a 34 bit win 7 system in an a attempt to use the Starshoot monochrome system. Unfortunately, my Starshoot CD is damaged.I can not find a site to
Robin Riordan
May 21
#11847
 
11846

Re: New SSAG will not connect in Windows

Have you made sure you have the latest driver for the SSAG. The latest driver has solved this problem for others in the past. Also, you may need the latest
wa5tku
May 15
#11846
 
11845

Re: New SSAG will not connect in Windows

I'm using the same USB cable cable that works with a Meade DSI-II. I've tried Windows 8.1 and 7 on two different computers. The computers are a Mac running
jrcpvaz
May 13
#11845
 
11844

Re: CCD Camera repairs

Hi John Thanks for clarifying. Yeah I hear what you’re saying about the grease. I was already starting to think about that. As I’ve said in an earlier
    Neil Allison
    May 13
    #11844
    This message has attachments
    11843

    Re: CCD Camera repairs

    Neil, not to worry. My comment about the frame grabber was off topic because it applies to a different video camera. Since you've already tried different USB
    jrcpvaz
    May 13
    #11843
     
    11842

    Re: Grey Screen

    Mine was on vista 32, as I'm playing with the original star shoot. But the latest maxim dl works great, allthough I still have  issues getting a good picture
    Dean Taylor
    May 12
    #11842
     
    11841

    Re: Grey Screen

    Hi Dean, and thank you for your response. Was that on a Windows 7 platform? 32 or 64 bit? Thanks, Tom
    epsilon2675
    May 12
    #11841
     
    11840

    Re: Grey Screen

    I had this issue with maxim essential, but worked fine in maxim 5 with the obsolete driverpack installed, just an idea.  Sent from Yahoo Mail on Android
    Dean Taylor
    May 12
    #11840
     
    11839

    Grey Screen

    Hi guys, Well now that I got the drivers installed on the SDSCI II, the best I seem to get is a grey screen that is somewhat responsive to changing light.
    epsilon2675
    May 12
    #11839
     
    11838

    Re: CCD Camera repairs

    Hey John Unfortunately, I don’t have the skills to do what you say. I don’t even know what the frame grabber is so I’m not able to check it. In short, I
      Neil Allison
      May 12
      #11838
      This message has attachments
      11837

      Re: CCD Camera repairs

      Hi Rick I've tried several different power sources to exclude that as a possible cause. I've tried numerous power tanks, mains adapters and deep cycle
        Neil Allison
        May 12
        #11837
        This message has attachments
        11836

        Re: CCD Camera repairs

        You say you've tried everything else.... What are you using for a power supply? If you're using a wall wart, try connecting with a deep cycle battery. Rick
        azcharlie1
        May 12
        #11836
         
        11835

        Re: CCD Camera repairs

        I found an issue with my frame grabber where the ground wire was broken. Repairing the wire fixed the problem. Can you check for continuity on all ground wires
        jrcpvaz
        May 12
        #11835
         
        11834

        Re: CCD Camera repairs

        Hi John I doubt that is the issue. The connections are very, very clean. However, I will certainly give it a try. I’ve tried everything else !!! Surely there
          Neil Allison
          May 11
          #11834
          This message has attachments
          View First Topic Go to View Last Topic
          Loading 1 - 15 of total 11,848 messages