[OKI-ARM-mcus] Re: Oki Semiconductor Incorporates Unique Features to Deliver Industry's Lowest
- hi :
it is seemed very well:-)
but do you notice the write time of the Embeded flash
of the chips , it is no more than 500 times, so maybe
everyone want to use the chip they need get one AME51
first for debug.
--- Eric Engler <englere.geo@...>写道:
> Current.html/PR-20050808.htmlI just attended the class today in Atlanta. I was
This was not a marketing event - this was a pure
From the moment I arrived I got "down and dirty" with
the ame51 demo
board, the JLink, and the IAR tool suite. They had
everything boxed up
when we arrived, and we unpackaged it, wired it up,
and most of us got
it working in less than 15 minutes, before the class
The IAR representative couldn't make it so I was a
little concerned at
first. But that doubt went away when it became obvious
that the OKI
representatives were extremely knowledgeable about the
They didn't miss a beat.
The demo projects were well thought-out, as was the
itself. They had a large amount of RAM that could be
configured into a
ROM emulation mode, which made it possible to support
The instructors from OKI and Nu Horizons were very
ARM devices in general, and not just the OKI devices.
I asked a lot of
questions and several others asked a lot of questions,
and we always
got great answers. These guys knew their stuff. In
some classes I've
had before the instructors seemed to draw a blank if
you get them off
of their prepared material, but this was not a problem
in this class.
Their presentation was full of technical details and
good advice, and
the labs were well designed. We only had 4 hours to
work with, but it
was jam-packed with info and it'll take me a couple
days to digest it all.
If any of you have a chance to attend this class in
please do it! It's the best 4 hours I've spent in a
I had to rush out at the end because I was due accross
town for a
meeting. I felt bad that I didn't have more time to
socialize. I hope
the fine people involved with this event will get the
word on how much
I enjoyed it.
Thanks OKI and Nu Horizons!
YAHOO! GROUPS LINKS
Visit your group "OKI-ARM-mcus" on the web.
To unsubscribe from this group, send an email to:
Your use of Yahoo! Groups is subject to the Yahoo!
Terms of Service.
> but do you notice the write time of the Embeded flashWow, I didn't know it was only 500 times. That seems very low to me.
> of the chips , it is no more than 500 times, so maybe
> everyone want to use the chip they need get one AME51
> first for debug.
But the AME51 board has 1 Meg of external RAM onboard, and they let
you map it to the normal flash range. Most of the time people will
develop programs using this RAM feature. This lets you set more than 1
breakpoint, and this will help to save the flash.
I was suprised that they make one version of the chip small enough to
fit on a smart card (which is the size of a credit card).