Loading ...
Sorry, an error occurred while loading the content.

Re: [N1MM] Problem with Repeat CQ using CATA keying

Expand Messages
  • ba4alc
    sorry, I tested again with a longer enough repeat time setting, It works ok. It was due to I was using a very long cq message at first. Jack/BA4ALC
    Message 1 of 5 , Apr 24, 2013
    • 0 Attachment
      sorry, I tested again with a longer enough repeat time setting, It works ok. It was due to I was using a very long cq message at first.


      Jack/BA4ALC

      --- In N1MMLogger@yahoogroups.com, "ba4alc" <bg4alc@...> wrote:
      >
      > Hello John,
      >
      > There is no gap between CQs even I set the repeat time is very long.
      >
      > Jack/BA4ALC
      >
      > --- In N1MMLogger@yahoogroups.com, John Bednar <k3ct@> wrote:
      > >
      > > Jack,
      > >
      > > The program doesn't know when the radio completes the message or your cw speed when using CAT commands. So the program code starts the repeat timer when the radio command is sent to the radio.
      > >
      > > Set the repeat timer three seconds longer than then the cq message time.
      > >
      > > John, K3CT
      > >
      > >
      > > On Apr 23, 2013, at 5:27 AM, "ba4alc" <bg4alc@> wrote:
      > >
      > > > When I set the massage.
      > > >
      > > > F1 CQ,{CATA1ASC KY CQ BA4ALC}
      > > >
      > > > Or someghing like that.
      > > >
      > > > Than set cq repeat on. It will repeat cqing with no interval regardless your cq repeat time setting.
      > > >
      > > > Jack
      > > >
      > > >
      > > >
      > > > ------------------------------------
      > > >
      > > > To unsubscribe, send an email to:
      > > > N1MMLogger-unsubscribe@yahoogroups.com
      > > >
      > > > Yahoo! Groups Links
      > > >
      > > >
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.