Loading ...
Sorry, an error occurred while loading the content.

Re: Rig is Being Keyed but There is No Output

Expand Messages
  • Rossdauer19
    Hey, guys...issue is resolved. Under the MMVARI setup menu: Output Soundcard I initially had same as input soundcard selected. When I changed it to Speaker
    Message 1 of 6 , Feb 2, 2013
    • 0 Attachment
      Hey, guys...issue is resolved.

      Under the MMVARI setup menu: Output Soundcard

      I initially had "same as input soundcard" selected. When I changed it to "Speaker USB Audio Codec" things started working.

      I appreciate all the help.

      73,

      Mike

      --- In N1MMLogger@yahoogroups.com, "Rossdauer19" wrote:
      >
      > Thanks, Rich
      >
      > Going to check again tonight. I think I'm good on track 2. I typed a call in the box and the rig goes TX and the PSK waveform looks good etc. Same thing with hitting F1 and it looks like everything is functioning normally.
      >
      > I think I'll double check everything you've brought up though...usually seems to be that one click you forgot...
      >
      > --- In N1MMLogger@yahoogroups.com, "rich_ve3ki" wrote:
      > >
      > > Some semi-random thoughts:
      > >
      > > This is probably not directly related to your no output problem, but the Unable to Open COM3 message suggests that something may not be quite right in your configuration for COM3 and COM2. Have you consulted http://www.microham.com/Downloads/U3_N1MM_Setup.pdf ?
      > >
      > > Re the no output from MMVARI:
      > >
      > > Track 1: In the Digital Setup window under the MMVARI tab, check the sound card selections and the Digital Output Level.
      > >
      > > Track 2: What mode is the radio actually in while this is happening? What contest is selected, i.e. do you have a contest selected that allows digital modes? What are your settings under Mode Control in the Configurer (both sides, but especially on the right side beside PSK)? If you type PSK into the call sign box and then hit Enter, does that change anything?
      > >
      > > 73,
      > > Rich VE3KI
      > >
      > >
      > > --- In N1MMLogger@yahoogroups.com, "Rossdauer19" wrote:
      > > >
      > > > Hopefully, someone has experienced this...
      > > >
      > > > Rig: KENWOOD TS570
      > > > Interface: MICROHAM USA USBIII
      > > > COM 2: RIG CONTROL
      > > > COM 3:CW & PTT
      > > > OS: Windows 7
      > > >
      > > > N1MM is configured to: DTR=CW,RTS=PTTTxBoth on COM 3. Both digital and CW boxes are checked.
      > > >
      > > > Planning to use MMVARI AFSK for PSK63 contest this weekend.
      > > >
      > > > When I click TX my rig clear goes into transmit, but there is no indication of any power output or ALC deflection whatsoever. I can adjust the TX pot on the front of the interface to 100%, but still nothing.
      > > >
      > > > One would think the sound card levels need set in the Windows 7 mixer, but I can get the HRD DM780 & Digipan both to key the rig and show power output.
      > > >
      > > > One final thing: I do get an error message after exiting the N1MM config. stating: ERROR PORT 3 IS ALREADY OPEN.
      > > >
      > > > Thanks,
      > > >
      > > > Mike
      > > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.