Loading ...
Sorry, an error occurred while loading the content.

Re: [N1MM] Macro commands for Omni 6 and Orion 2

Expand Messages
  • WilliamH
    I m sure you re correct as the audio commands don t work. The Omni 6 seems to have a pot for volume rather than an encoder. Bill, N0AC
    Message 1 of 5 , Feb 2, 2013
    • 0 Attachment
      I'm sure you're correct as the audio commands don't work. The Omni 6 seems to have a pot for volume rather than an encoder.

      Bill, N0AC

      --- In N1MMLogger@yahoogroups.com, "John Bednar" wrote:
      >
      >
      > Supported in Orion
      >
      > Unsupported in Omni6. I don't believe the firmware contains a command to
      > poll for the audio level. Let me know if this is incorrect.
      >
      > John, K3CT
      >
      >
      > -----Original Message-----
      > From: N1MMLogger@yahoogroups.com [mailto:N1MMLogger@yahoogroups.com] On
      > Behalf Of Steve London
      > Sent: Saturday, February 02, 2013 10:48 AM
      > To: N1MMLogger@yahoogroups.com
      > Cc: WilliamH
      > Subject: Re: [N1MM] Macro commands for Omni 6 and Orion 2
      >
      > On 02/02/2013 08:33 AM, WilliamH wrote:
      > > I am trying to auomate SO2R audio switching for my Omni 6 and Orion 2 set
      > up by using the SO2R macros {inactiveaudioon} (as an example) and others.
      > >
      > > 1. Are these macros rig commands or PC commands (like going to a sound
      > > card)
      >
      > These are all radio commands sent over the CAT interface.
      >
      > > 2. Do any of these macros work with either of the above rigs
      >
      > The N1MM team implemented these commands for all supported radios that
      > appear to have the capability to control receiver audio over the CAT
      > interface. I can say with 100% certainty that they work for the TS-590S.
      > Honestly, for other radios I would say try it out and report your results.
      > If you are interested in seeing how I use them for SO2R let me know.
      >
      > 73,
      > Steve, N2IC
      >
      >
      > ------------------------------------
      >
      > To unsubscribe, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      > Yahoo! Groups Links
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.