Loading ...
Sorry, an error occurred while loading the content.
 

Re: CW Interface

Expand Messages
  • ne4z
    Well I figured out the problem. The cable I am using was wired to pins 4 and 7 on a DB9. Come to find out it needed to be wired to pins 4 and 5. Thanks for the
    Message 1 of 7 , May 3, 2012
      Well I figured out the problem. The cable I am using was wired to pins 4 and 7 on a DB9. Come to find out it needed to be wired to pins 4 and 5. Thanks for the replies and recommendations.

      Mike - NT7R

      --- In N1MMLogger@yahoogroups.com, "ne4z" <ne4z@...> wrote:
      >
      > I have a cw interface I built from schematics I found online. I have been successful in getting this to key N3FPJ contest software using a usb-serial adapter by selecting the correct com port and RTS. When I try it with N1MM all I get is random dits and dahs. In the configure window I have DTR set to CW and RTS set to PTT. Is there something I am overlooking or any suggestions that may help me figure this out?
      >
      > Thanks
      > Mike - NT7R
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.