Loading ...
Sorry, an error occurred while loading the content.

Crash on Win 7 after new log setup

Expand Messages
  • Bob Mabery
    Greetings All, I am running Windows 7 on a Dell laptop. All radios were off. I had a similar problems using earlier versions. I just downloaded and installed
    Message 1 of 4 , Dec 2, 2011
    • 0 Attachment
      Greetings All,
      I am running Windows 7 on a Dell laptop.
      All radios were off.
      I had a similar problems using earlier versions.

      I just downloaded and installed 11.11.0.4 and created a new database for
      the ARRL ten meter contest.

      Then I downloaded the WL_CTY.dat for N1MM 8.6.2 and Later.

      I started N1MM and answered YES to the replace CTY file dialog.

      I then created a new log for ARRL Ten meter. ( single op, QRP, fixed, etc.)
      When I clicked OK for the new log, N1MM crashed.

      The following information was listed in the crash dialog box:

      Problem signature:
      Problem Event Name: APPCRASH
      Application Name: N1MM Logger.exe
      Application Version: 11.11.0.4
      Application Timestamp: 4ed4cf50
      Fault Module Name: N1MMV5~1.OCX
      Fault Module Version: 3.0.0.1
      Fault Module Timestamp: 4dd19d27
      Exception Code: c0000005
      Exception Offset: 00005c70
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 1033
      Additional Information 1: 0a9e
      Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
      Additional Information 3: 0a9e
      Additional Information 4: 0a9e372d3b4ad19135b953a78882e789


      Thanks & 73
      --
      Amateur Radio Operator
      *W4YBB *
      * "Y*our *B*uddy *B*ob"


      [Non-text portions of this message have been removed]
    • Steve London
      In Configure Ports, Audio tab, change the Radio 1 Output Device to Default . 73, Steve, N2IC
      Message 2 of 4 , Dec 2, 2011
      • 0 Attachment
        In Configure Ports, Audio tab, change the Radio 1 Output Device to "Default".

        73,
        Steve, N2IC

        On 12/02/2011 09:16 AM, Bob Mabery wrote:
        > Greetings All,
        > I am running Windows 7 on a Dell laptop.
        > All radios were off.
        > I had a similar problems using earlier versions.
        >
        > I just downloaded and installed 11.11.0.4 and created a new database for
        > the ARRL ten meter contest.
        >
        > Then I downloaded the WL_CTY.dat for N1MM 8.6.2 and Later.
        >
        > I started N1MM and answered YES to the replace CTY file dialog.
        >
        > I then created a new log for ARRL Ten meter. ( single op, QRP, fixed, etc.)
        > When I clicked OK for the new log, N1MM crashed.
        >
        > The following information was listed in the crash dialog box:
        >
        > Problem signature:
        > Problem Event Name: APPCRASH
        > Application Name: N1MM Logger.exe
        > Application Version: 11.11.0.4
        > Application Timestamp: 4ed4cf50
        > Fault Module Name: N1MMV5~1.OCX
        > Fault Module Version: 3.0.0.1
        > Fault Module Timestamp: 4dd19d27
        > Exception Code: c0000005
        > Exception Offset: 00005c70
        > OS Version: 6.1.7601.2.1.0.768.3
        > Locale ID: 1033
        > Additional Information 1: 0a9e
        > Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
        > Additional Information 3: 0a9e
        > Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
        >
        >
        > Thanks& 73
      • Bob Mabery
        Steve, The Radio 1 Parameter was already in default. After the first crash, the program started normally and allowed me to look at the log the setup without an
        Message 3 of 4 , Dec 2, 2011
        • 0 Attachment
          Steve,
          The Radio 1 Parameter was already in default.
          After the first crash, the program started normally and allowed me to look
          at the log the setup without an error.
          however, when I changed power from QRP to LOW, N1MM crashed with the same
          signature:
          Any suggestions?
          Bob



          On Fri, Dec 2, 2011 at 11:37 AM, Steve London <n2icarrl@...> wrote:

          > In Configure Ports, Audio tab, change the Radio 1 Output Device to
          > "Default".
          >
          > 73,
          > Steve, N2IC
          >
          >
          > On 12/02/2011 09:16 AM, Bob Mabery wrote:
          >
          >> Greetings All,
          >> I am running Windows 7 on a Dell laptop.
          >> All radios were off.
          >> I had a similar problems using earlier versions.
          >>
          >> I just downloaded and installed 11.11.0.4 and created a new database for
          >> the ARRL ten meter contest.
          >>
          >> Then I downloaded the WL_CTY.dat for N1MM 8.6.2 and Later.
          >>
          >> I started N1MM and answered YES to the replace CTY file dialog.
          >>
          >> I then created a new log for ARRL Ten meter. ( single op, QRP, fixed,
          >> etc.)
          >> When I clicked OK for the new log, N1MM crashed.
          >>
          >> The following information was listed in the crash dialog box:
          >>
          >> Problem signature:
          >> Problem Event Name: APPCRASH
          >> Application Name: N1MM Logger.exe
          >> Application Version: 11.11.0.4
          >> Application Timestamp: 4ed4cf50
          >> Fault Module Name: N1MMV5~1.OCX
          >> Fault Module Version: 3.0.0.1
          >> Fault Module Timestamp: 4dd19d27
          >> Exception Code: c0000005
          >> Exception Offset: 00005c70
          >> OS Version: 6.1.7601.2.1.0.768.3
          >> Locale ID: 1033
          >> Additional Information 1: 0a9e
          >> Additional Information 2: 0a9e372d3b4ad19135b953a78882e7**89
          >> Additional Information 3: 0a9e
          >> Additional Information 4: 0a9e372d3b4ad19135b953a78882e7**89
          >>
          >
          >
          >> Thanks& 73
          >>
          >


          --
          Amateur Radio Operator
          *W4YBB *
          * "Y*our *B*uddy *B*ob"


          [Non-text portions of this message have been removed]
        • William Smith
          Bob, Sounds like you are probably running out of memory. Go to Task Manager - APPLICATIONS and turn off everything you aren t using before starting N1MM and
          Message 4 of 4 , Dec 2, 2011
          • 0 Attachment
            Bob,
            Sounds like you are probably running out of memory. Go to Task Manager - APPLICATIONS and turn off everything you aren't using before starting N1MM and see if that helps.. Also to eliminate unnecessary programs that are running you can  go to ACCESSORIES-RUN- msconfig STARTUP tab and turn stuff off permanently.
            73,
            Bill N3XL


            >________________________________
            >From: Bob Mabery <bmabery@...>
            >To: N1MM <N1MMLogger@yahoogroups.com>
            >Sent: Friday, December 2, 2011 12:36 PM
            >Subject: Re: [N1MM] Crash on Win 7 after new log setup
            >
            >

            >Steve,
            >The Radio 1 Parameter was already in default.
            >After the first crash, the program started normally and allowed me to look
            >at the log the setup without an error.
            >however, when I changed power from QRP to LOW, N1MM crashed with the same
            >signature:
            >Any suggestions?
            >Bob
            >
            >On Fri, Dec 2, 2011 at 11:37 AM, Steve London <n2icarrl@...> wrote:
            >
            >> In Configure Ports, Audio tab, change the Radio 1 Output Device to
            >> "Default".
            >>
            >> 73,
            >> Steve, N2IC
            >>
            >>
            >> On 12/02/2011 09:16 AM, Bob Mabery wrote:
            >>
            >>> Greetings All,
            >>> I am running Windows 7 on a Dell laptop.
            >>> All radios were off.
            >>> I had a similar problems using earlier versions.
            >>>
            >>> I just downloaded and installed 11.11.0.4 and created a new database for
            >>> the ARRL ten meter contest.
            >>>
            >>> Then I downloaded the WL_CTY.dat for N1MM 8.6.2 and Later.
            >>>
            >>> I started N1MM and answered YES to the replace CTY file dialog.
            >>>
            >>> I then created a new log for ARRL Ten meter. ( single op, QRP, fixed,
            >>> etc.)
            >>> When I clicked OK for the new log, N1MM crashed.
            >>>
            >>> The following information was listed in the crash dialog box:
            >>>
            >>> Problem signature:
            >>> Problem Event Name: APPCRASH
            >>> Application Name: N1MM Logger.exe
            >>> Application Version: 11.11.0.4
            >>> Application Timestamp: 4ed4cf50
            >>> Fault Module Name: N1MMV5~1.OCX
            >>> Fault Module Version: 3.0.0.1
            >>> Fault Module Timestamp: 4dd19d27
            >>> Exception Code: c0000005
            >>> Exception Offset: 00005c70
            >>> OS Version: 6.1.7601.2.1.0.768.3
            >>> Locale ID: 1033
            >>> Additional Information 1: 0a9e
            >>> Additional Information 2: 0a9e372d3b4ad19135b953a78882e7**89
            >>> Additional Information 3: 0a9e
            >>> Additional Information 4: 0a9e372d3b4ad19135b953a78882e7**89
            >>>
            >>
            >>
            >>> Thanks& 73
            >>>
            >>
            >
            >--
            >Amateur Radio Operator
            >*W4YBB *
            >* "Y*our *B*uddy *B*ob"
            >
            >[Non-text portions of this message have been removed]
            >
            >
            >
            >
            >

            [Non-text portions of this message have been removed]
          Your message has been successfully submitted and would be delivered to recipients shortly.