Loading ...
Sorry, an error occurred while loading the content.
 

Re: [N1MMLogger] Runtime Error '11'

Expand Messages
  • Bill Coleman N2BC
    Hi Tom, via K1TTT * * * * * * * * * * * * * * * * * Bill Coleman N2BC http://home.stny.rr.com ... From: Tom Wagner To:
    Message 1 of 5 , Feb 18, 2001
      Hi Tom, via K1TTT
      * * * * * * * * * * * * * * * * *
      Bill Coleman N2BC
      http://home.stny.rr.com
      ----- Original Message -----
      From: "Tom Wagner" <tomwagner@...>
      To: <N1MMLogger@yahoogroups.com>
      Sent: Sunday, February 18, 2001 4:39 PM
      Subject: Re: [N1MMLogger] Runtime Error '11'


      > Have you tried resetting your Kenwood computer?
      > If it is an 850, you press A=B and turn on the power
      > switch. You will lose all your memory settings and
      > other settings, but it's worth a try.
      >
      > What node were you connected to? Answer quickly
      > if you can!
      >
      > Tom - N1MM
      > ----- Original Message -----
      > From: Bill Coleman N2BC <n2bc@...>
      > To: N1MM Reflector <N1MMLogger@yahoogroups.com>
      > Sent: Sunday, February 18, 2001 16:31
      > Subject: [N1MMLogger] Runtime Error '11'
      >
      >
      > > Getting the above followed by 'Division by Zero'
      > >
      > > Have had this a few times in the past but didn't see a pattern. Failing
      > > 'solid' now - but 'solid' is a relative term... Seems to be related to
      > the
      > > data stream coming in from Telnet cluster. Here's the scenario:
      > >
      > > Fired up LOGGER, did a SH/DX 10 - croaked
      > > Fired up LOGGER, did a SH/DX 160 thru 15, all OK, SH/DX 10 - croaked.
      > >
      > > Tried it a total of at least 15 times with various combos of commands to
      > the
      > > cluster, always blows on the SH/DX 10. I suspect it's something in the
      > data
      > > stream - but I looked at the spots & all the calls, freqs, times look
      > legit.
      > > Unfortunately I
      > > could not find a way to copy/paste the spots to another file.
      > >
      > > After clicking OK to the first W2K nasty-gram, I get a window labelled:
      > > Clicking on this pane will jump to the frequency of the spot clicked
      on.:
      > > N1MMLogger.exe - Application Error
      > >
      > > then: The instruction at "0x66093c9b" referenced memory at
      "0x000000030".
      > > The memory could not be "read".
      > >
      > > I suspect it's taken a dump somehere, but unless it was an IBM
      mainframe,
      > > I'll never be able to read it! HI HI.
      > >
      > > Otherwise LOGGER performing super! Have not been able to actually
      > > participate in the contest due to rig failure (super QRP with zero watts
      > > output from my Kenwood - sigh) but have spent a few hours clicking
      spots,
      > > watching it log, jumping around.
      > >
      > > Tom, if the dump would help, hollar & I'll figure out where it is...
      > >
      > > 73 all, Bill
      > > * * * * * * * * * * * * * * * * *
      > > Bill Coleman N2BC
      > > http://home.stny.rr.com
      > >
      > >
      > >
      > >
      > > To unsubscribe from this group, send an email to:
      > > N1MMLogger-unsubscribe@yahoogroups.com
      > >
      > >
      > >
      >
      >
      >
      > To unsubscribe from this group, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      >
      >
    • Bill Coleman N2BC
      Tom, on K1TTT now. sh/dx/30 10 is OK, sh/dx/75 10 fails * * * * * * * * * * * * * * * * * Bill Coleman N2BC http://home.stny.rr.com ... From: Tom Wagner
      Message 2 of 5 , Feb 18, 2001
        Tom, on K1TTT now. sh/dx/30 10 is OK, sh/dx/75 10 fails
        * * * * * * * * * * * * * * * * *
        Bill Coleman N2BC
        http://home.stny.rr.com
        ----- Original Message -----
        From: "Tom Wagner" <tomwagner@...>
        To: <N1MMLogger@yahoogroups.com>
        Sent: Sunday, February 18, 2001 4:39 PM
        Subject: Re: [N1MMLogger] Runtime Error '11'


        > Have you tried resetting your Kenwood computer?
        > If it is an 850, you press A=B and turn on the power
        > switch. You will lose all your memory settings and
        > other settings, but it's worth a try.
        >
        > What node were you connected to? Answer quickly
        > if you can!
        >
        > Tom - N1MM
        > ----- Original Message -----
        > From: Bill Coleman N2BC <n2bc@...>
        > To: N1MM Reflector <N1MMLogger@yahoogroups.com>
        > Sent: Sunday, February 18, 2001 16:31
        > Subject: [N1MMLogger] Runtime Error '11'
        >
        >
        > > Getting the above followed by 'Division by Zero'
        > >
        > > Have had this a few times in the past but didn't see a pattern. Failing
        > > 'solid' now - but 'solid' is a relative term... Seems to be related to
        > the
        > > data stream coming in from Telnet cluster. Here's the scenario:
        > >
        > > Fired up LOGGER, did a SH/DX 10 - croaked
        > > Fired up LOGGER, did a SH/DX 160 thru 15, all OK, SH/DX 10 - croaked.
        > >
        > > Tried it a total of at least 15 times with various combos of commands to
        > the
        > > cluster, always blows on the SH/DX 10. I suspect it's something in the
        > data
        > > stream - but I looked at the spots & all the calls, freqs, times look
        > legit.
        > > Unfortunately I
        > > could not find a way to copy/paste the spots to another file.
        > >
        > > After clicking OK to the first W2K nasty-gram, I get a window labelled:
        > > Clicking on this pane will jump to the frequency of the spot clicked
        on.:
        > > N1MMLogger.exe - Application Error
        > >
        > > then: The instruction at "0x66093c9b" referenced memory at
        "0x000000030".
        > > The memory could not be "read".
        > >
        > > I suspect it's taken a dump somehere, but unless it was an IBM
        mainframe,
        > > I'll never be able to read it! HI HI.
        > >
        > > Otherwise LOGGER performing super! Have not been able to actually
        > > participate in the contest due to rig failure (super QRP with zero watts
        > > output from my Kenwood - sigh) but have spent a few hours clicking
        spots,
        > > watching it log, jumping around.
        > >
        > > Tom, if the dump would help, hollar & I'll figure out where it is...
        > >
        > > 73 all, Bill
        > > * * * * * * * * * * * * * * * * *
        > > Bill Coleman N2BC
        > > http://home.stny.rr.com
        > >
        > >
        > >
        > >
        > > To unsubscribe from this group, send an email to:
        > > N1MMLogger-unsubscribe@yahoogroups.com
        > >
        > >
        > >
        >
        >
        >
        > To unsubscribe from this group, send an email to:
        > N1MMLogger-unsubscribe@yahoogroups.com
        >
        >
        >
      • Tom Wagner
        Do you remember the call of the station last displayed when it crashed? I couldn t reproduce it even with sh/dx/120 10 Tom ... From: Bill Coleman N2BC
        Message 3 of 5 , Feb 18, 2001
          Do you remember the call of the station last displayed when it
          crashed? I couldn't reproduce it even with sh/dx/120 10

          Tom
          ----- Original Message -----
          From: Bill Coleman N2BC <n2bc@...>
          To: <N1MMLogger@yahoogroups.com>
          Sent: Sunday, February 18, 2001 17:02
          Subject: Re: [N1MMLogger] Runtime Error '11'


          > Tom, on K1TTT now. sh/dx/30 10 is OK, sh/dx/75 10 fails
          > * * * * * * * * * * * * * * * * *
          > Bill Coleman N2BC
          > http://home.stny.rr.com
          > ----- Original Message -----
          > From: "Tom Wagner" <tomwagner@...>
          > To: <N1MMLogger@yahoogroups.com>
          > Sent: Sunday, February 18, 2001 4:39 PM
          > Subject: Re: [N1MMLogger] Runtime Error '11'
          >
          >
          > > Have you tried resetting your Kenwood computer?
          > > If it is an 850, you press A=B and turn on the power
          > > switch. You will lose all your memory settings and
          > > other settings, but it's worth a try.
          > >
          > > What node were you connected to? Answer quickly
          > > if you can!
          > >
          > > Tom - N1MM
          > > ----- Original Message -----
          > > From: Bill Coleman N2BC <n2bc@...>
          > > To: N1MM Reflector <N1MMLogger@yahoogroups.com>
          > > Sent: Sunday, February 18, 2001 16:31
          > > Subject: [N1MMLogger] Runtime Error '11'
          > >
          > >
          > > > Getting the above followed by 'Division by Zero'
          > > >
          > > > Have had this a few times in the past but didn't see a pattern.
          Failing
          > > > 'solid' now - but 'solid' is a relative term... Seems to be related
          to
          > > the
          > > > data stream coming in from Telnet cluster. Here's the scenario:
          > > >
          > > > Fired up LOGGER, did a SH/DX 10 - croaked
          > > > Fired up LOGGER, did a SH/DX 160 thru 15, all OK, SH/DX 10 - croaked.
          > > >
          > > > Tried it a total of at least 15 times with various combos of commands
          to
          > > the
          > > > cluster, always blows on the SH/DX 10. I suspect it's something in
          the
          > > data
          > > > stream - but I looked at the spots & all the calls, freqs, times look
          > > legit.
          > > > Unfortunately I
          > > > could not find a way to copy/paste the spots to another file.
          > > >
          > > > After clicking OK to the first W2K nasty-gram, I get a window
          labelled:
          > > > Clicking on this pane will jump to the frequency of the spot clicked
          > on.:
          > > > N1MMLogger.exe - Application Error
          > > >
          > > > then: The instruction at "0x66093c9b" referenced memory at
          > "0x000000030".
          > > > The memory could not be "read".
          > > >
          > > > I suspect it's taken a dump somehere, but unless it was an IBM
          > mainframe,
          > > > I'll never be able to read it! HI HI.
          > > >
          > > > Otherwise LOGGER performing super! Have not been able to actually
          > > > participate in the contest due to rig failure (super QRP with zero
          watts
          > > > output from my Kenwood - sigh) but have spent a few hours clicking
          > spots,
          > > > watching it log, jumping around.
          > > >
          > > > Tom, if the dump would help, hollar & I'll figure out where it is...
          > > >
          > > > 73 all, Bill
          > > > * * * * * * * * * * * * * * * * *
          > > > Bill Coleman N2BC
          > > > http://home.stny.rr.com
          > > >
          > > >
          > > >
          > > >
          > > > To unsubscribe from this group, send an email to:
          > > > N1MMLogger-unsubscribe@yahoogroups.com
          > > >
          > > >
          > > >
          > >
          > >
          > >
          > > To unsubscribe from this group, send an email to:
          > > N1MMLogger-unsubscribe@yahoogroups.com
          > >
          > >
          > >
          >
          >
          >
          > To unsubscribe from this group, send an email to:
          > N1MMLogger-unsubscribe@yahoogroups.com
          >
          >
          >
        Your message has been successfully submitted and would be delivered to recipients shortly.