Whoa! This is an entirely different situation than we've been discussing (Running check box). Did
you inadvertantly have CQ Repeat turned on? (A reboot would certainly clear that.) Wouldn't hitting
ESC stop the CQ? (if not, suspect RF feedback) Did this happen just once or several times? Is it
73, Ted W4NZ
]On Behalf Of DGB
Sent: Tuesday, July 01, 2008 12:26 AM
Subject: Re: [N1MM] Stuck in Running mode (v 8.6.0 and newer)
Had the same thing happen to me, runaway CQ. Very embarrassing, had to
give up my CQ freq for the rebooot!
73 de ns9i
Tom Osborne wrote:
> Hi Ted
> That may be a solution if the radio is not hooked up, but when it
> to us, we had the radio connected to the computer. We even re-booted the
> computer and it still did it. Funny thing was, it didn't do it all the
> time, just now and then. 73
> Tom W7WHY
> > I'm sure John has this solved. But, it occured to me that if you are
> > using rig control(and why
> > wouldn't you?), once you go into the Run mode, it will try to stay
> in Run
> > mode until you change
> > frequency. If you have no radio connected, the only way N1MM knows
> > changed frequency is if
> > you type a new one in.
> > Try this, go into Run mode by checking the "Running" box. Note that "CQ
> > frequency" is inserted in
> > the call frame above the entry window and on the bandmap. Now, try
> > unchecking the "Running" box. The
> > check will re-appear.
> > Now, repeat this but right click the "CQ Frequency" in the bandmap and
> > select "Remove spot". This
> > clears the "CQ Frequency" from the bandmap and the "Running" box
> will be
> > unchecked.
> > Could this also be a solution?
> > 73, Ted W4NZ