Loading ...
Sorry, an error occurred while loading the content.

Re: [N1MM] MFJ-1278 TNC

Expand Messages
  • Michael Morgan
    I don t have a MFJ but I have a Kam and I try to configure later if you would like. But one thing you may want to check is the Parity, Stop Bits, and Bit
    Message 1 of 4 , Sep 2, 2002
    • 0 Attachment
      I don't have a MFJ but I have a Kam and I try to configure later if you
      would like. But one thing you may want to check is the Parity, Stop
      Bits, and Bit Size. I used to have a MFJ and if I remember correctly
      they should bet 8-N-1. I know if any of those are set incorrectly it
      will display garbage.

      Good Luck.

      Michael, AA5SH

      > Has anyone got an MFJ multimode TNC to work with N1MM Logger? I have
      > been trying to set mine up for use in a second RTTY receive window
      > with no success. The TNC works fine from Hyperterm, as well as from
      > WF1B and TRLog, but I can't get it to talk to N1MM. When I start the
      > TNC up, instead of the signon message I just get a few garbage
      > characters, and it doesn't respond to the Enter key or {CTRL-C}. I've
      > tried it with Autobaud on and at fixed speeds of 9600, 4800 and 2400,
      > all without success. Any hints?
      >
      > Rich VE3IAY
      >
      >
      >
      > ------------------------ Yahoo! Groups Sponsor ---------------------~-
      ->
      > 4 DVDs Free +s&p Join Now
      > http://us.click.yahoo.com/pt6YBB/NXiEAA/MVfIAA/ELTolB/TM
      > ---------------------------------------------------------------------
      ~->
      >
      > To unsubscribe, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      >
      >
      > Your use of Yahoo! Groups is subject to
      http://docs.yahoo.com/info/terms/
      >
      >
      >
      >

      --
    • Michael Morgan
      I don t have a MFJ but I have a Kam and I try to configure later if you would like. But one thing you may want to check is the Parity, Stop Bits, and Bit
      Message 2 of 4 , Sep 2, 2002
      • 0 Attachment
        I don't have a MFJ but I have a Kam and I try to configure later if you
        would like. But one thing you may want to check is the Parity, Stop
        Bits, and Bit Size. I used to have a MFJ and if I remember correctly
        they should bet 8-N-1. I know if any of those are set incorrectly it
        will display garbage.

        Good Luck.

        Michael, AA5SH

        > Has anyone got an MFJ multimode TNC to work with N1MM Logger? I have
        > been trying to set mine up for use in a second RTTY receive window
        > with no success. The TNC works fine from Hyperterm, as well as from
        > WF1B and TRLog, but I can't get it to talk to N1MM. When I start the
        > TNC up, instead of the signon message I just get a few garbage
        > characters, and it doesn't respond to the Enter key or {CTRL-C}. I've
        > tried it with Autobaud on and at fixed speeds of 9600, 4800 and 2400,
        > all without success. Any hints?
        >
        > Rich VE3IAY
        >
        >
        >
        > ------------------------ Yahoo! Groups Sponsor ---------------------~-
        ->
        > 4 DVDs Free +s&p Join Now
        > http://us.click.yahoo.com/pt6YBB/NXiEAA/MVfIAA/ELTolB/TM
        > ---------------------------------------------------------------------
        ~->
        >
        > To unsubscribe, send an email to:
        > N1MMLogger-unsubscribe@yahoogroups.com
        >
        >
        >
        > Your use of Yahoo! Groups is subject to
        http://docs.yahoo.com/info/terms/
        >
        >
        >
        >

        --
      • Michael Morgan
        I don t have a MFJ but I have a Kam and I try to configure later if you would like. But one thing you may want to check is the Parity, Stop Bits, and Bit
        Message 3 of 4 , Sep 2, 2002
        • 0 Attachment
          I don't have a MFJ but I have a Kam and I try to configure later if you
          would like. But one thing you may want to check is the Parity, Stop
          Bits, and Bit Size. I used to have a MFJ and if I remember correctly
          they should bet 8-N-1. I know if any of those are set incorrectly it
          will display garbage.

          Good Luck.

          Michael, AA5SH

          > Has anyone got an MFJ multimode TNC to work with N1MM Logger? I have
          > been trying to set mine up for use in a second RTTY receive window
          > with no success. The TNC works fine from Hyperterm, as well as from
          > WF1B and TRLog, but I can't get it to talk to N1MM. When I start the
          > TNC up, instead of the signon message I just get a few garbage
          > characters, and it doesn't respond to the Enter key or {CTRL-C}. I've
          > tried it with Autobaud on and at fixed speeds of 9600, 4800 and 2400,
          > all without success. Any hints?
          >
          > Rich VE3IAY
          >
          >
          >
          > ------------------------ Yahoo! Groups Sponsor ---------------------~-
          ->
          > 4 DVDs Free +s&p Join Now
          > http://us.click.yahoo.com/pt6YBB/NXiEAA/MVfIAA/ELTolB/TM
          > ---------------------------------------------------------------------
          ~->
          >
          > To unsubscribe, send an email to:
          > N1MMLogger-unsubscribe@yahoogroups.com
          >
          >
          >
          > Your use of Yahoo! Groups is subject to
          http://docs.yahoo.com/info/terms/
          >
          >
          >
          >

          --
        • ve3iay
          I found the answer. It was not the 8 N 1 stuff - I had that set the same as in Hyperterm, and it turned out to be correct in the end. The problem was flow
          Message 4 of 4 , Sep 6, 2002
          • 0 Attachment
            I found the answer. It was not the 8 N 1 stuff - I had that set the
            same as in Hyperterm, and it turned out to be correct in the end. The
            problem was flow control. For whatever reason, I have to set the flow
            control in N1MM to RTS. Even though None and Xon/Xoff both work fine
            from HyperTerm, they wouldn't work from N1MM.

            Rich VE3IAY


            --- In N1MMLogger@y..., "Michael Morgan" <michael@a...> wrote:
            > I don't have a MFJ but I have a Kam and I try to configure later if
            you
            > would like. But one thing you may want to check is the Parity,
            Stop
            > Bits, and Bit Size. I used to have a MFJ and if I remember
            correctly
            > they should bet 8-N-1. I know if any of those are set incorrectly
            it
            > will display garbage.
            >
            > Good Luck.
            >
            > Michael, AA5SH
            >
            > > Has anyone got an MFJ multimode TNC to work with N1MM Logger? I
            have
            > > been trying to set mine up for use in a second RTTY receive
            window
            > > with no success. The TNC works fine from Hyperterm, as well as
            from
            > > WF1B and TRLog, but I can't get it to talk to N1MM. When I start
            the
            > > TNC up, instead of the signon message I just get a few garbage
            > > characters, and it doesn't respond to the Enter key or {CTRL-C}.
            I've
            > > tried it with Autobaud on and at fixed speeds of 9600, 4800 and
            2400,
            > > all without success. Any hints?
            > >
            > > Rich VE3IAY
            > >
            > >
            > >
          Your message has been successfully submitted and would be delivered to recipients shortly.