Loading ...
Sorry, an error occurred while loading the content.

RE: [N1MM] Re: LPT Control Pin Documentation (Was DX Doubler Pin 14 Setup?)

Expand Messages
  • Ted Bryant
    The LPT pin-out is well documented in the N1MM manual (at least since v7.8.4 of August 9, 2007). Please refer to Section 39.4.1 Parallel Port Pin Layout. 73,
    Message 1 of 1 , Oct 2, 2007
    View Source
    • 0 Attachment
      The LPT pin-out is well documented in the N1MM manual (at least since v7.8.4
      of August 9, 2007). Please refer to Section 39.4.1 Parallel Port Pin
      Layout.

      73, Ted W4NZ


      -----Original Message-----
      From: N1MMLogger@yahoogroups.com [mailto:N1MMLogger@yahoogroups.com]On
      Behalf Of Syl
      Sent: Saturday, September 29, 2007 9:26 AM
      To: N1MMLogger@yahoogroups.com
      Subject: [N1MM] Re: LPT Control Pin Documentation (Was DX Doubler Pin 14
      Setup?)



      > The logic for pin 14 is also not described and should be explicitly
      > stated. It goes to a HIGH level when Radio 1 has TX focus and to a
      > LOW level when Radio 2 has TX focus (the complement of Pin 3; the
      > note in the box for Pin 3 to this effect is correct).




      No virus found in this outgoing message.
      Checked by AVG Free Edition.
      Version: 7.5.488 / Virus Database: 269.13.39/1044 - Release Date: 10/2/2007
      11:10 AM


      [Non-text portions of this message have been removed]
    Your message has been successfully submitted and would be delivered to recipients shortly.