Loading ...
Sorry, an error occurred while loading the content.

23684Re: [N1MM] Important FT-1000 Split fix

Expand Messages
  • Clive GM3POI
    Mar 1, 2005
      Same here. Clive GM3POI
      ----- Original Message -----
      From: "Gerry" <telwest@...>
      To: <N1MMLogger@yahoogroups.com>
      Sent: Tuesday, March 01, 2005 3:55 PM
      Subject: Re: [N1MM] Important FT-1000 Split fix


      >
      >
      > Pete & Clive,
      >
      > With the 1000D here, Transceive on VFO B logs the VFO A frequency in the
      > FREQ column of the Log Page. The log detail shows the RX as VFO A and the
      > TX as VFO B.
      >
      > Therefore if you're transceiving on VFO B, the Log shows the wrong
      > information.
      >
      > Here is the ADIF record produced:
      > <CALL:4>W4RR <QSO_DATE:8>20050301 <TIME_ON:6>154527 <BAND:3>40M
      > <QSX_FREQ:8>18.15503 <CONTEST_ID:2>DX <FREQ:7>7.00694 <MODE:2>CW
      > <RST_RCVD:3>599 <RST_SENT:3>599 <OPERATOR:6>VA6XDX <CQZ:1>5 <STX:2>13
      > <POINTS:1>1 <RADIO_NR:1>1 <EOR>
      >
      > I was XCV on 18 Mhz on VFO B and VFO a was on 7 MHz. The ADIF record
      > thinks I was on 40 meters, listening on 7 Mhz and Transmitting on 18 MHz.
      > Clearly a problem.
      >
      >
      > Gerry
      > VE6LB/VA6XDX
      > ARRL Card Checker
      > (403) 251-6520
      > ve6lb (at) rac.ca
      > www.qsl.net/ve6lb/
      >
      > ----- Original Message -----
      > From: Pete Smith
      > To: N1MMLogger@yahoogroups.com ; N1MMLogger@yahoogroups.com
      > Sent: Tuesday, March 01, 2005 7:27 AM
      > Subject: Re: [N1MM] Important FT-1000 Split fix
      >
      >
      > What happens if you have both RX and TX on the sub receiver? In other
      > words, if VFO A is completely out of the picture. What frequencies are
      > being logged then (not just the display, but the full log entry?
      >
      > 73, Pete N4ZR
      >
      > At 04:23 AM 3/1/2005, Clive GM3POI wrote:
      >
      >
      > >How can we then log a Q on the sub VFO on say another band.?
      > >Is it possible for it to be an option of log Rx or Tx frequency. I know
      > I
      > >would go with TX frequency as per I think every other logger. Clive
      > GM3POI
      > >----- Original Message -----
      > >From: "Pete Smith" <n4zr@...>
      > >To: <N1MMLogger@yahoogroups.com>; <N1MMLogger@yahoogroups.com>
      > >Sent: Monday, February 28, 2005 9:40 PM
      > >Subject: Re: [N1MM] Important FT-1000 Split fix
      > >
      > >
      > > >
      > > > Well, I understand your concern, but I'm not sure it makes
      > operational
      > > > sense to display your transmit frequency. A principal use for the
      > > > *displayed* log entries is to be able to tell a dupe caller, "We
      > worked
      > > > you
      > > > at 2019Z and you were on 7045." Since both frequencies are stored in
      > the
      > > > log database, you can always satisfy the Radio Canada authorities if
      > > > necessary. We just need to make sure that both frequencies get there
      > > > properly (when there is more than one) and that they are properly
      > handled
      > > > in the bandmap.
      > > >
      > > > 73, Pete N4ZR
      > > >
      > > >
      > > >
      > > > At 04:08 PM 2/28/2005, Gerry Hohn wrote:
      > > >
      > > >
      > > >
      > > >>Pete,
      > > >>
      > > >>Actually, I think the TX frequency is the one to display. Our
      > licensing
      > > >>authorities want to know where you where transmitting. Although this
      > is in
      > > >>the details, it's a bit more obscure.
      > > >>
      > > >>
      > > >>Gerry VE6LB
      > > >> ----- Original Message -----
      > > >> From: Pete Smith
      > > >> To: N1MMLogger@yahoogroups.com ; N1MMLogger@yahoogroups.com
      > > >> Sent: Monday, February 28, 2005 1:52 PM
      > > >> Subject: Re: [N1MM] Important FT-1000 Split fix
      > > >>
      > > >>
      > > >> Ah yes, that's right, I think. Seems like we went through this
      > > >> existential
      > > >> question a while ago ;^) -- what frequency should you put in the
      > > >> displayed
      > > >> log for a split QSO, the frequency on which you received the
      > station or
      > > >> the
      > > >> frequency on which you transmitted to work him? I think that
      > settling
      > > >> on a
      > > >> single standard -- e.g., always showing the receiving frequency --
      > is
      > > >> OK.
      > > >>
      > > >> Good, I'm glad the split fix appears to be working as designed.
      > > >>
      > > >> 73, Pete
      > > >>
      > > >> At 12:41 PM 2/28/2005, Gerry wrote:
      > > >>
      > > >>
      > > >>
      > > >> >Clive and Tom,
      > > >> >
      > > >> >I get the same result as Clive in the LOG window. The frequency
      > > >> displayed
      > > >> >in the FREQ column is clearly the RX frequency. If you look in
      > the
      > > >> EDIT
      > > >> >CONTACT tab, the RX and TX frequency are correctly logged.
      > > >> >
      > > >> >Gerry
      > > >> >VE6LB/VA6XDX
      > > >> >ARRL Card Checker
      > > >> >(403) 251-6520
      > > >> >ve6lb (at) rac.ca
      > > >> >www.qsl.net/ve6lb/
      > > >> >
      > > >> > ----- Original Message -----
      > > >> > From: Clive GM3POI
      > > >> > To: N1MMLogger@yahoogroups.com
      > > >> > Sent: Sunday, February 27, 2005 5:21 PM
      > > >> > Subject: Re: [N1MM] Important FT-1000 Split fix
      > > >> >
      > > >> >
      > > >> > Hi Tom,
      > > >> > I have tried your fix, By TXing on 3506 with VFO A +TX and it
      > log
      > > >> on 3506.
      > > >> > However if I then Split the TX to VFO B on 7026 it stills logs
      > a Q
      > > >> on
      > > >> > 3506.
      > > >> > 73 Clive GM3POI
      > > >> > ----- Original Message -----
      > > >> > From: "Tom Wagner" <tfwagner@...>
      > > >> > To: <N1MMLogger@yahoogroups.com>
      > > >> > Sent: Sunday, February 27, 2005 9:12 PM
      > > >> > Subject: [N1MM] Important FT-1000 Split fix
      > > >> >
      > > >> >
      > > >> > >
      > > >> > > The fix for the FT-1000 not recognizing the state of
      > > >> > > split mode on the radio has been uploaded to the
      > > >> > > server.
      > > >> > >
      > > >> > > http://217.77.130.151/RevisionHistory.htm
      > > >> > >
      > > >> > >
      > > >> > > Tom Wagner - N1MM
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > > To unsubscribe, send an email to:
      > > >> > > N1MMLogger-unsubscribe@yahoogroups.com
      > > >> > >
      > > >> > >
      > > >> > > Yahoo! Groups Links
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > >
      > > >> > > --
      > > >> > > Internal Virus Database is out-of-date.
      > > >> > > Checked by AVG Anti-Virus.
      > > >> > > Version: 7.0.300 / Virus Database: 266.2.0 - Release Date:
      > > >> 21/02/2005
      > > >> > >
      > > >> > >
      > > >> >
      > > >> >
      > > >> >
      > > >> > --
      > > >> > Internal Virus Database is out-of-date.
      > > >> > Checked by AVG Anti-Virus.
      > > >> > Version: 7.0.300 / Virus Database: 266.2.0 - Release Date:
      > > >> 21/02/2005
      > > >> >
      > > >> >
      > > >> >
      > > >> > To unsubscribe, send an email to:
      > > >> > N1MMLogger-unsubscribe@yahoogroups.com
      > > >> >
      > > >> >
      > > >> >
      > > >> >
      > > >> > Yahoo! Groups Sponsor
      > > >> > ADVERTISEMENT
      > > >> >
      > > >> >
      > > >> >
      > > >> >
      > > >> >
      > > >>
      > > >>
      > > >>
      > >
      > >------------------------------------------------------------------------------
      > > >> > Yahoo! Groups Links
      > > >> >
      > > >> > a.. To visit your group on the web, go to:
      > > >> > http://groups.yahoo.com/group/N1MMLogger/
      > > >> >
      > > >> > b.. To unsubscribe from this group, send an email to:
      > > >> > N1MMLogger-unsubscribe@yahoogroups.com
      > > >> >
      > > >> > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
      > of
      > > >> Service.
      > > >> >
      > > >> >
      > > >> >
      > > >> >[Non-text portions of this message have been removed]
      > > >> >
      > > >> >
      > > >> >
      > > >> >To unsubscribe, send an email to:
      > > >> >N1MMLogger-unsubscribe@yahoogroups.com
      > > >> >
      > > >> >
      > > >> >Yahoo! Groups Links
      > > >> >
      > > >> >
      > > >> >
      > > >> >
      > > >>
      > > >>
      > > >>
      > > >> To unsubscribe, send an email to:
      > > >> N1MMLogger-unsubscribe@yahoogroups.com
      > > >>
      > > >>
      > > >>
      > > >>
      > > >> Yahoo! Groups Sponsor
      > > >> ADVERTISEMENT
      > > >>
      > > >>
      > > >>
      > > >>
      > > >>
      > >
      > >>------------------------------------------------------------------------
      > > ------
      > > >> Yahoo! Groups Links
      > > >>
      > > >> a.. To visit your group on the web, go to:
      > > >> http://groups.yahoo.com/group/N1MMLogger/
      > > >>
      > > >> b.. To unsubscribe from this group, send an email to:
      > > >> N1MMLogger-unsubscribe@yahoogroups.com
      > > >>
      > > >> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
      > > >> Service.
      > > >>
      > > >>
      > > >>
      > > >>[Non-text portions of this message have been removed]
      > > >>
      > > >>
      > > >>
      > > >>To unsubscribe, send an email to:
      > > >>N1MMLogger-unsubscribe@yahoogroups.com
      > > >>
      > > >>
      > > >>Yahoo! Groups Links
      > > >>
      > > >>
      > > >>
      > > >>
      > > >
      > > >
      > > >
      > > > To unsubscribe, send an email to:
      > > > N1MMLogger-unsubscribe@yahoogroups.com
      > > >
      > > >
      > > > Yahoo! Groups Links
      > > >
      > > >
      > > >
      > > >
      > > >
      > > >
      > > >
      > > >
      > > >
      > > > --
      > > > No virus found in this incoming message.
      > > > Checked by AVG Anti-Virus.
      > > > Version: 7.0.300 / Virus Database: 266.5.1 - Release Date: 27/02/2005
      > > >
      > > >
      > >
      > >
      > >
      > >--
      > >No virus found in this outgoing message.
      > >Checked by AVG Anti-Virus.
      > >Version: 7.0.300 / Virus Database: 266.5.1 - Release Date: 27/02/2005
      > >
      > >
      > >
      > >To unsubscribe, send an email to:
      > >N1MMLogger-unsubscribe@yahoogroups.com
      > >
      > >
      > >Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
      >
      >
      > To unsubscribe, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      >
      >
      >
      > Yahoo! Groups Sponsor
      > ADVERTISEMENT
      >
      >
      >
      >
      >
      > ------------------------------------------------------------------------------
      > Yahoo! Groups Links
      >
      > a.. To visit your group on the web, go to:
      > http://groups.yahoo.com/group/N1MMLogger/
      >
      > b.. To unsubscribe from this group, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
      > Service.
      >
      >
      >
      > [Non-text portions of this message have been removed]
      >
      >
      >
      > To unsubscribe, send an email to:
      > N1MMLogger-unsubscribe@yahoogroups.com
      >
      >
      > Yahoo! Groups Links
      >
      >
      >
      >
      >
      >
      >
      >
      >
      > --
      > No virus found in this incoming message.
      > Checked by AVG Anti-Virus.
      > Version: 7.0.300 / Virus Database: 266.5.1 - Release Date: 27/02/2005
      >
      >



      --
      No virus found in this outgoing message.
      Checked by AVG Anti-Virus.
      Version: 7.0.300 / Virus Database: 266.5.1 - Release Date: 27/02/2005
    • Show all 13 messages in this topic