Loading ...
Sorry, an error occurred while loading the content.

47364Re: [mh] IO Link Momentary C question

Expand Messages
  • Craig
    Aug 20, 2014
    • 0 Attachment
      Here is the output from 'set relay to momentary c' (output is in reverse chronicle order):

      08/20/2014 07:57:58 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/20/2014 07:57:58 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222221222
      08/20/2014 07:57:58 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3
      08/20/2014 07:57:58 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group:
      08/20/2014 07:57:58 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0250) insteon_received
                  From Address: 1c:ff:94
                    To Address: 1a:76:8b
                 Message Flags: 22
                      Message Type: (001) ACK of Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 0
                          Max Hops: 2
               Insteon Message: 2014
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (14)


      08/20/2014 07:57:58 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222014
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=14
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2014
                             Cmd 1: 20 Insteon command not decoded
                             Cmd 2: 14
              PLM Response: (06) ACK

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a201406
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2014
                             Cmd 1: 20 Insteon command not decoded
                             Cmd 2: 14

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 02621cff940a2014
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=14 incurred delay of 0.89 seconds; starting hop-count: 2
      08/20/2014 07:57:57 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222212221
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group:
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0250) insteon_received
                  From Address: 1c:ff:94
                    To Address: 1a:76:8b
                 Message Flags: 22
                      Message Type: (001) ACK of Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 0
                          Max Hops: 2
               Insteon Message: 2013
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (13)

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222013
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=13
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2013
                             Cmd 1: 20 Insteon command not decoded
                             Cmd 2: 13
              PLM Response: (06) ACK

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a201306
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2013
                             Cmd 1: 20 Insteon command not decoded
                             Cmd 2: 13

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 02621cff940a2013
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=13 incurred delay of 0.44 seconds; starting hop-count: 2
      08/20/2014 07:57:57 PM [Insteon::BaseInterface] WARN! Dropped duplicate incoming message 1cff941a768b222006, from $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2222122212
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0250) insteon_received
                  From Address: 1c:ff:94
                    To Address: 1a:76:8b
                 Message Flags: 22
                      Message Type: (001) ACK of Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 0
                          Max Hops: 2
               Insteon Message: 2006
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (06)

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222006
      08/20/2014 07:57:57 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG4: $io_garage_door3->default_hop_count()=2 :: hop_array[]=2221222123
      08/20/2014 07:57:57 PM [Insteon::BaseObject] DEBUG3: Adding hop count of 2 to hop_array of $io_garage_door3
      08/20/2014 07:57:57 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:set_operating_flags; type:direct; group:
      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0250) insteon_received
                  From Address: 1c:ff:94
                    To Address: 1a:76:8b
                 Message Flags: 22
                      Message Type: (001) ACK of Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 0
                          Max Hops: 2
               Insteon Message: 2006
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (06)

      08/20/2014 07:57:57 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b222006
      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=set_operating_flags; extra=06
      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2006
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (06) Deveice Dependent
              PLM Response: (06) ACK

      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a200606
      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 2006
                             Cmd 1: (20) Set Operating Flags
                             Cmd 2: (06) Deveice Dependent

      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 02621cff940a2006
      08/20/2014 07:57:56 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=set_operating_flags; extra=06 incurred delay of 0.00 seconds; starting hop-count: 2
      08/20/2014 07:57:56 PM Running: io garage door3 set relay to momentary c


      ------------------------------------------
      and the output from' print settings to log':
      ------------------------------------------

      08/20/2014 08:01:38 PM [Insteon::IOLinc] Device Settings are: Program Lock: Off; Transmit Led: On; Relay Linked: Off; X10 Reverse: Off; Trigger Reverse: On; Momentary_A: On.
      08/20/2014 08:01:38 PM [Insteon::BaseInterface] DEBUG3: PLM command:insteon_received; Device command:get_operating_flags; type:direct; group:
      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0250) insteon_received
                  From Address: 1c:ff:94
                    To Address: 1a:76:8b
                 Message Flags: 22
                      Message Type: (001) ACK of Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 0
                          Max Hops: 2
               Insteon Message: 1f4a
                             Cmd 1: (1f) Get Operating Flags
                             Cmd 2: (4a) Config Flags

      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02501cff941a768b221f4a
      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM acknowledge: obj=$io_garage_door3; command=get_operating_flags
      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 1f00
                             Cmd 1: (1f) Get Operating Flags
                             Cmd 2: (00) Request Flags
              PLM Response: (06) ACK

      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Received PLM raw data: 02621cff940a1f0006
      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG4:
               PLM Command: (0262) insteon_send
                    To Address: 1c:ff:94
                 Message Flags: 0a
                      Message Type: (000) Direct Message
                    Message Length: (0) Standard Length
                         Hops Left: 2
                          Max Hops: 2
               Insteon Message: 1f00
                             Cmd 1: (1f) Get Operating Flags
                             Cmd 2: (00) Request Flags

      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG3: Sending  PLM raw data: 02621cff940a1f00
      08/20/2014 08:01:38 PM [Insteon_PLM] DEBUG2: Sending obj=$io_garage_door3; command=get_operating_flags incurred delay of 0.00 seconds; starting hop-count: 2
      08/20/2014 08:01:38 PM Running: io garage door3 print settings to log



      Thank you for looking into this. Very small (tiny) cosmetic error in the code. 'Deveice' (see hilight above)

      -Craig


      On Tue, Aug 19, 2014 at 4:09 PM, Kevin Robert Keegan <kevin@...> wrote:
      It seems to be working for me.

      Please set your insteon debugging level to 4, and then resend your print.log.


      On Mon, Aug 18, 2014 at 7:13 PM, Craig <archyii@...> wrote:
      I am having a little issue setting my garage door IO Link to momentary C mode. Here is the output when setting it:

      08/18/2014 09:58:35 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/18/2014 09:58:35 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/18/2014 09:58:34 PM [Insteon::IOLinc] Acknowledged flag set for $io_garage_door3
      08/18/2014 09:58:34 PM Running: io garage door3 set relay to momentary c

      But when I check the settings by running print settings to log, I get:

      08/18/2014 10:03:22 PM [Insteon::IOLinc] Device Settings are: Program Lock: Off; Transmit Led: On; Relay Linked: Off; X10 Reverse: Off; Trigger Reverse: On; Momentary_A: On.
      08/18/2014 10:03:22 PM Running: io garage door3 print settings to log

      It shows Momentary_A whatever I set it to. It also doesn't seem to be working correctly in C mode (as best I can tell).  Any ideas? I am running a current (fairly recent) master version of the Insteon code.

      --
      -Craig

      ------------------------------------------------------------------------------

      ________________________________________________________
      To unsubscribe from this list, go to: https://lists.sourceforge.net/lists/listinfo/misterhouse-users






      --
      -Craig
    • Show all 4 messages in this topic