Loading ...
Sorry, an error occurred while loading the content.

26216Re: Bow eye placement / support for Caroline

Expand Messages
  • prairiedog2332
    Dec 3, 2012
    • 0 Attachment
      Drilling an over-sized hole, filling it with goop and then drilling the
      correct sized hole means that the edge grain of the plywood gets sealed.
      So only applies to plywood for the most part.

      It is also very important to do this for any scupper openings or
      self-draining end wells that are popular in Michalak and Bolger
      designs. Try to seal any edge grain as best you can and make sure they
      stay open. Dead leaves and dirt stuck in drains is not a good combo.
      Nels

      --- In Michalak@yahoogroups.com, john colley <Helliconia54@...> wrote:
      >
      > its plastic! The drill wont know its there!
      >
      > Â
      > "There is magic in the feel of a paddle and the movement of a canoe, a
      magic compounded of distance, adventure, solitude, and peace."
      > -Sigurd Olson
      >
      >
      > ________________________________
      > From: Carl Volkwein carlvolkwein@...
      > To: "Michalak@yahoogroups.com" Michalak@yahoogroups.com
      > Sent: Monday, 3 December 2012 9:38 AM
      > Subject: Re: [Michalak] Re: Bow eye placement / support for Caroline
      >
      >
      > Â
      > How hard is epoxy to drill through?
      >




      [Non-text portions of this message have been removed]
    • Show all 18 messages in this topic