Loading ...
Sorry, an error occurred while loading the content.

21456Re: glass cloth over keel or under?

Expand Messages
  • Dean Herring
    Oct 1, 2010
    • 0 Attachment
      forgot to say - the keel is 3/4 by 4 so it seems to just be a rock guard?

      --- In Michalak@yahoogroups.com, "Dean Herring" <dfharing@...> wrote:
      >
      > say - I've now got Mike's boat turned over (hull up) and getting ready to clip the copper wires down on the joints. I will wet the joints, add epoxy fillets, fair, and then double glass with 4 inch wide tape. I want to add the keel to the bottom straight onto the wood with screws from the inside and epoxy it to the hull. I am then thinking about putting a very generous fillet between the hull and keel and then glassing over the bottom hull with a 50 inch wide by 16 feet cloth. The plans seem to have you glass the bottom first and then add the keel. Others have caulked in the keel over the glass. I don't know if there is another permutation of epoxying the keel onto the glass? Anything wrong with my approach of adding the keel first and then glassing? Does the keel need a sharp edge to the water on the sides of it? Also need to add the skeg to the keel at the back.
      >
      > Thanks, Dean
      >
    • Show all 15 messages in this topic