Re: Data change
- Hi David
I've now got it back!
In my first post I mentioned loss of MSG data - meaning complete loss of signal. It very curious but I have recently seen a lot of dropouts, periods when the data would simply vanish - so this wasn't a surprise. When I checked the data I found that the last sequence ended with a complete image - so not indicating a local problem - hence my post.
Without moving the dish or anything I 'waggled' the input LNB cable, and back came my signal! Clearly this connector needs a cleanup.
Thanks for responding David.
--- In MSGfirstname.lastname@example.org, "David J Taylor" <gm8arv@...> wrote:
> But there is no signal showing on the actual DVB receiver. Changing a
> parameter in MSG DM is further down the chain.
> Yes, Lawrence, and I recall that the parallel dissemination stopped
> yesterday in any case. The no-signal issue, which you didn't mention, is
> something different, but assuming you are using EUMETCast rather than direct
> reception, no dish or LNB changes should be required. Check cables, and try
> power-down rebooting the DVB receiver and hence the LNB.
> You can check what signal others are receiving here:
> SatSignal Software - Quality software written to your requirements
> Web: http://www.satsignal.eu
> Email: david-taylor@...