Loading ...
Sorry, an error occurred while loading the content.
 

Re: RMSgateway station not displayed in 'RMSPacketStatus' page

Expand Messages
  • pd1acf
    Hi Charles, Your suggestion is a good one. I created a new file, and pointed the channels.xml to that. In our case it is called :
    Message 1 of 5 , Jan 1, 2013
      Hi Charles,

      Your suggestion is a good one. I created a new file, and pointed the channels.xml to that. In our case it is called : /usr/local/bin/rmschanstat_hgl

      For the other sysops, this is only required since we have a custom script checking the 'scc' interfaces for out 'opto-scc' cards...

      Best regards,

      ron



      --- In LinuxRMS@yahoogroups.com, C Schuman <k4gbb1@...> wrote:
      >
      > Ron,
      > I had the same problem. I suggested a change in the Install script to
      > enable the rejection of the rmschanstat replacement. Brian suggested
      > that I rename my custom file and note the changed file name in the
      > channels.xml file.
      > <statuschecker>
      > /usr/local/bin/rmsacistat $type $name $callsign
      > </statuschecker>
      > This has worked for me during last two upgrade cycles.
      >
      > <<Charley>>
      > k4gbb
      >
      > pd1acf wrote:
      > > Hans,
      > >
      > > I figured out i was bitten by the automatic replacement of our '/usr/local/bin/rmschanstat' which had custom checks for our 'scc cards'.
      > >
      > > After copying back the old script, it now works again !
      > >
      > > Best regards,
      > >
      > > ron
      > >
      > >
      > > --- In LinuxRMS@yahoogroups.com, "DL5DI - Hans-J." <dl5di@> wrote:
      > >> note that you have to add the new xml entry for each channel separate, otherwise it wont work.
      > >> Charley's patch only works for one entry.
      > >> Changes will be transfered with rmsgw_aci, which runs once or twice per hour (if it is ok in the crontab).
      > >> check the logfile, it should tell you whats wrong.
      > >> you may need to increase the loglevel, the manpage should help on that.
      > >>
      > >> 73
      > >> Hans DL5DI
      > >>
      > >> Von meinem iPhone gesendet
      > >>
      > >> Am 30.12.2012 um 08:07 schrieb "pd1acf" <pd1acf@>:
      > >>
      > >>> Hi All,
      > >>>
      > >>> Just want to confirm if other stations also have this problem :
      > >>> - our station (pi8hgl-10) running the latest RMSgateway 2.2.0, seems not visible in the ' RMS channels' overview page, nor the VHF/UHF gateways page.
      > >>>
      > >>> Strange thing is, that when exporting the complete list with the ' frequency list' button, our station is in there, but only with a single entry from our 'channels' configuration.
      > >>>
      > >>> The 'RMSPacketPositions' page does not show our frequenties correctly anymore.?.
      > >>> In the past it would show here the multiple frequencies we operate on if we click on our station on the map...
      > >>>
      > >>>
      > >
      > >
      > >
      > > ------------------------------------
      > >
      > > Yahoo! Groups Links
      > >
      > >
      > >
      > >
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.