Re: 8USB extension
- I guess I can't help you much, since I did my install from scratch
after upgrading my hard drive. I created new Windows shares after
installing this, so i didn't lose any existing ones.
--- In LinkStation_General@yahoogroups.com, "keks31977"
> Thanks for your reply.
> I have done it in the same order like you mentioned. But after the
> installation, all shares in Windows were gone. So I installed the A
> package afterwards again. It seams to work good for two days. I
> the some data by using the MC from the internal drive to the 3rdonly
> USB-drive, without any problems. On the 3rd day the Linkstation
> blinks and reports that the internal HDD is unformated. But when IHDD.
> reflash the original firmware 1.15 all data was on the internal
> Very strage I think. Now it is working fine with the original FW.But
> I need more than 2 USB drives.Linkstation
> The following steps I do in root shell:
> Linkstation Pro V2
> 1 500 GB drive connected directly to the Linkstation
> 2 1TB drives connected via an USB-Hub to the Linkstation
> Can anybody give me a hint, what I have done wrong ?
> Or perhaps can anybody tell me, how I can only change the
> to support more than 2 USB drives, without changing other things ?it's
> Best Regards
> --- In LinkStation_General@yahoogroups.com, "Joel Abelardo"
> <nyarrgh@> wrote:
> > I am using Firmware 1.15 with the latest dual drive package and
> > been stable for the last month. Make sure you follow thebefore
> > instructions carefully, including updating with the "A" packet
> > the main files and the addons if you need them.more
> > --- In LinkStation_General@yahoogroups.com, "keks31977"
> > <hubertus@> wrote:
> > >
> > > Hi
> > > I have a Linkstation Pro (Firmware 1.15). I would like to use
> > > than only 2 USB drives with the Linkstation. I have tried thelatest
> > > dual_drive package. It works fine the first time, butafterwards my
> > > Linkstation was bricked. So I switch to EM mode and install the
> > > official Firmware 1.15 again. Is there a simple way to keep the
> > > Linkstation stabil and only change the firmware to have the
> > > possibility to connect eg. 3 or 5 USB devices ?
> > > Best Regards
> > > Andreas
> > >
i want to install the 8USB extension on my Linkstation pro, but it seems i am to stupid to do.
I downloaded the A-Version package, but if i want to install by executing the script
i got the error message
sh: install_a-version: command not found
How can i run the script?
Can anyone help me please. Thanks in advance
- Hi Markus
In Windows the local directory is always checked for the command and then your path. In Linux the local directory is never checked only the path.
In order to run a script in Linux that isn't in the path you must explicitly state where it is. The short hand for the local directory is "./", so run:
--- In LinkStation_General@yahoogroups.com, "markus.marb" <markus.marb@...> wrote:
> i want to install the 8USB extension on my Linkstation pro, but it seems i am to stupid to do.
> I downloaded the A-Version package, but if i want to install by executing the script
> i got the error message
> sh: install_a-version: command not found
> How can i run the script?
> Can anyone help me please. Thanks in advance