Re: Boot Up problems after upgrade on HD-H120LAN
- --- In LinkStation_General@yahoogroups.com, "Gary Smith" <gary@...> wrote:
> I've recently upgraded my Link Station from 120GB to 500GB. The installationMaybe the 500 draws too much energy, or takes too long to spin up. I would delete all
> went ok, and I have managed to transfer the data from the original drive.
> However if I have the unit sleep overnight, often when it powers up the
> following morning the unit goes into diagnostic mode. If I power cycle a
> couple of time the drive usually then boot ok.
> Has anyone experienced a similar problem, or able to suggest a fix? At the
> moment the unit is running 24hrs a day.
partitions from the HDD, run the firmware updater twice, and see if the problem persists.