Loading ...
Sorry, an error occurred while loading the content.

Re: Boot Up problems after upgrade on HD-H120LAN

Expand Messages
  • lalunas10
    ... Maybe the 500 draws too much energy, or takes too long to spin up. I would delete all partitions from the HDD, run the firmware updater twice, and see if
    Message 1 of 2 , Dec 1, 2007
    • 0 Attachment
      --- In LinkStation_General@yahoogroups.com, "Gary Smith" <gary@...> wrote:
      > I've recently upgraded my Link Station from 120GB to 500GB. The installation
      > went ok, and I have managed to transfer the data from the original drive.
      > However if I have the unit sleep overnight, often when it powers up the
      > following morning the unit goes into diagnostic mode. If I power cycle a
      > couple of time the drive usually then boot ok.
      >
      > Has anyone experienced a similar problem, or able to suggest a fix? At the
      > moment the unit is running 24hrs a day.

      Maybe the 500 draws too much energy, or takes too long to spin up. I would delete all
      partitions from the HDD, run the firmware updater twice, and see if the problem persists.

      -Andre
    Your message has been successfully submitted and would be delivered to recipients shortly.