Loading ...
Sorry, an error occurred while loading the content.

Re: [LinkStation_General] Re: Mount WINDOWS (SMB) share

Expand Messages
  • javamarket
    Hi Thomas, Thanks again for you trying to help - - Here is the output: BUFFALO INC. Link Station series HD-HLAN (HIDETADA) bash-2.05a# mount
    Message 1 of 14 , Jul 17, 2007
    • 0 Attachment
      Hi Thomas,
       
      Thanks again for you trying to help - -
       
      Here is the output:
       

      BUFFALO INC. Link Station series HD-HLAN (HIDETADA)
      bash-2.05a# mount \\media.worthasset.com:media \mnt\share\Media
      mount: RPC: Unable to receive; errno = Connection refused
      bash-2.05a#
      bash-2.05a# dmesg
      <6>Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
      <4>Linux version 2.4.17_mvl21-sandpoint (root@toda_dev.melcoinc.co.jp) (gcc vers
      ion 2.95.3 20010315 (release/MontaVista)) #997 2005╟» 2╖ε 25╞ⁿ ╢Γ═╦╞ⁿ 19:29:09 J
      ST
      <4>BUFFALO Network Attached Storage Series
      <4>2002-2004 BUFFALO INC.
      <4>On node 0 totalpages: 16384
      <4>zone(0): 16384 pages.
      <4>zone(1): 0 pages.
      <4>zone(2): 0 pages.
      <4>Kernel command line: root=/dev/hda1
      <4>OpenPIC Version 1.2 (1 CPUs and 139 IRQ sources) at 80040000
      <4>decrementer frequency = 24.576000 MHz
      <4>rtc sec count 1184230790
      <4>Calibrating delay loop... 130.66 BogoMIPS
      <4>Memory: 60300k available (1332k kernel code, 580k data, 192k init, 0k highmem
      )
      <4>Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
      <4>Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
      <4>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
      <4>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
      <4>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
      <4>POSIX conformance testing by UNIFIX
      <6>PCI: Probing PCI hardware
      <6>Linux NET4.0 for Linux 2.4
      <6>Based upon Swansea University Computer Society NET3.039
      <4>Initializing RT netlink socket
      <4>Starting kswapd
      <4>Disabling the Out Of Memory Killer
      <6>Journalled Block Device driver loaded
      <4>pty: 256 Unix98 ptys configured
      <6>MELCO INC. RTC driver ver 1.00
      <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
       enabled
      <6>ttyS00 at 0x80004600 (irq = 138) is a 16550A
      <6>ttyS01 at 0x80004500 (irq = 137) is a 16550A
      <4>block: 128 slots per queue, batch=32
      <4>RAMDISK driver initialized: 16 RAM disks of 10000K size 1024 blocksize
      <6>Uniform Multi-Platform E-IDE driver Revision: 6.31
      <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
      <4>CMD680: IDE controller on PCI bus 00 dev 60
      <4>CMD680: chipset revision 2
      <4>CMD680: 100% native mode on irq 17
      <4>    ide0: BM-DMA at 0xbffed0-0xbffed7, BIOS settings: hda:pio, hdb:pio
      <4>    ide1: BM-DMA at 0xbffed8-0xbffedf, BIOS settings: hdc:pio, hdd:pio
      <4>hda: WDC WD2500BB-55GUA0, ATA DISK drive
      <4>ide0 at 0xbffef8-0xbffeff,0xbffef6 on irq 17
      <6>hda: 488397168 sectors (250059 MB) w/2048KiB Cache, CHS=30401/255/63, UDMA(10
      0)
      <6>Partition check:
      <6> hda: hda1 hda2 hda3 hda4
      <4>FLASHDISK:Initialized [FUJITSU MBM29PL32TM]
      <6>Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
      <6>tulip0:  MII transceiver #1 config 3100 status 7849 advertising 05e1.
      <6>eth0: ADMtek Comet rev 17 at 0xbfff00, 00:07:40:FB:D0:EE, IRQ 16.
      <6>SCSI subsystem driver Revision: 1.00
      <3>request_module[scsi_hostadapter]: Root fs not mounted
      <3>request_module[scsi_hostadapter]: Root fs not mounted
      <6>usb.c: registered new driver usbdevfs
      <6>usb.c: registered new driver hub
      <6>hcd.c: ehci-hcd @ 00:0e.2, PCI device 1033:00e0 (NEC Corporation)
      <6>hcd.c: irq 19, pci mem c5000f00
      <6>usb.c: new USB bus registered, assigned bus number 1
      <6>hcd/ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
      <6>hub.c: USB hub found
      <6>hub.c: 5 ports detected
      <6>usb-ohci.c: USB OHCI at membase 0xc5002000, IRQ 19
      <6>usb-ohci.c: usb-00:0e.0, NEC Corporation USB
      <6>usb.c: new USB bus registered, assigned bus number 2
      <6>hub.c: USB hub found
      <6>hub.c: 3 ports detected
      <6>usb-ohci.c: USB OHCI at membase 0xc5004000, IRQ 19
      <6>usb-ohci.c: usb-00:0e.1, NEC Corporation USB (#2)
      <6>usb.c: new USB bus registered, assigned bus number 3
      <6>hub.c: USB hub found
      <6>hub.c: 2 ports detected
      <6>usb.c: registered new driver usblp
      <6>printer.c: v0.11: USB Printer Device Class driver
      <6>Initializing USB Mass Storage driver...
      <6>usb.c: registered new driver usb-storage
      <6>USB Mass Storage support registered.
      <6>NET4: Linux TCP/IP 1.0 for NET4.0
      <6>IP Protocols: ICMP, UDP, TCP, IGMP
      <4>IP: routing cache hash table of 512 buckets, 4Kbytes
      <4>TCP: Hash tables configured (established 4096 bind 4096)
      <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
      <6>NET4: AppleTalk 0.18a for Linux NET4.0
      <5>RAMDISK: Compressed image found at block 0
      <4>Freeing initrd memory: 2037k freed
      <4>fff70000:4f4b4f4b
      <4>EXT2-fs warning: checktime reached, running e2fsck is recommended
      <4>VFS: Mounted root (ext2 filesystem).
      <4>fff70000:4f4b4f4b
      <6>EXT3-fs: INFO: recovery required on readonly filesystem.
      <6>EXT3-fs: write access will be enabled during recovery.
      <6>kjournald starting.  Commit interval 5 seconds
      <6>EXT3-fs: recovery complete.
      <6>EXT3-fs: mounted filesystem with ordered data mode.
      <4>VFS: Mounted root (ext3 filesystem) readonly.
      <4>change_root: old root has d_count=2
      <5>Trying to unmount old root ... okay
      <4>Freeing unused kernel memory: 192k init
      <6>Adding Swap: 530136k swap-space (priority -1)
      <4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
      <6>EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
      <6>kjournald starting.  Commit interval 5 seconds
      <4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
      <6>EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
      <6>EXT3-fs: recovery complete.
      <6>EXT3-fs: mounted filesystem with ordered data mode.
      <5>portmap: server localhost not responding, timed out
      <5>portmap: server localhost not responding, timed out
      <4>lockd_up: makesock failed, error=-5
      <5>portmap: server localhost not responding, timed out
      <4>lockd_up: no pid, 2 users??
      <5>portmap: server localhost not responding, timed out
      <5>portmap: server localhost not responding, timed out
      <5>portmap: server localhost not responding, timed out
      <4>lockd_up: no pid, 3 users??
      <5>portmap: server localhost not responding, timed out
      <5>portmap: server localhost not responding, timed out
      <5>portmap: server localhost not responding, timed out
      <3>smb_read_super: missing data argument
      <3>smb_read_super: missing data argument
      <3>smbfs: mount_data version 1970496882 is not supported
      <3>smb_read_super: missing data argument
      <3>smb_read_super: missing data argument
      <3>smb_read_super: missing data argument
      bash-2.05a#
      bash-2.05a#

      ----- Original Message ----
      From: Thomas Ilnseher <illth@...>
      To: LinkStation_General@yahoogroups.com
      Sent: Tuesday, July 17, 2007 7:43:28 AM
      Subject: Re: [LinkStation_General] Re: Mount WINDOWS (SMB) share

      Am Dienstag, den 17.07.2007, 08:44 +0000 schrieb -:

      > Hi Thomas -
      >
      > Thanks for you ideas.
      >
      > When trying CIFS - "fs type cifs not supported by kernel"
      >
      > I have no real experience with LINUX so I'm walking mostly blind.
      > Can you tell me how / where to access the log file you mentioned?
      you should really try the following:

      try mounting your smb share as you did, and after it failed, run "dmesg"
      to see what went wrong.

      You can also post the relevant parts of the dmesg output here.

      one note: if you wont give the URI in a form of
      \\myserver\myshare, you have to type:

      \\\\myserver\ \myshare
      in bash. bash interprets \ as an escape character.
      >
      > Please forgive this old windows user (smile).
      >
      > --- In LinkStation_ General@yahoogro ups.com, Thomas
      Ilnseher
      > <illth@...> wrote:
      > >
      > > Am Dienstag, den 17.07.2007, 00:04 +0000 schrieb -:
      > > > Hello All -
      > > >
      > > > I'm able to mount NFS shares with
      > > >
      > > > mount somesource/share /mnt/share/somewher e
      > > >
      > > > without any issues.
      > > >
      > > > I'd like to do the same with a Windows share but am having
      > difficulty.
      > > >
      > > > When I try
      > > >
      > > > mount -t smbfs somesource/share /mnt/share/somewher e
      > > maybe you should try "-t cifs" instead of "-t smbfs". at least SuSE
      > > ships only the cifs driver...
      > > >
      > > > I get "wrong fs type, bad option, bad superblock ..."
      > > You might check the output of "dmesg" to see what exactly fails
      > > >
      > > > any help would be
      great.
      > > >
      > > > Thanks!
      > > >
      > > >
      > > >
      > > >
      > > >
      > >
      >
      >
      >
      >
      >




      Park yourself in front of a world of choices in alternative vehicles.
      Visit the Yahoo! Auto Green Center.
    • Thomas Ilnseher
      Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb javamarket: ... although i have no clue about this (tm), a quick search at google turned out that you might be
      Message 2 of 14 , Jul 18, 2007
      • 0 Attachment
        Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb javamarket:

        This seems to be the problem:

        > <3>smb_read_super: missing data argument
        > <3>smb_read_super: missing data argument
        > <3>smbfs: mount_data version 1970496882 is not supported
        > <3>smb_read_super: missing data argument
        > <3>smb_read_super: missing data argument
        > <3>smb_read_super: missing data argument
        although i have no clue about this (tm), a quick search at google turned
        out that you might be missing an helper program.

        this program is called mount.smbfs or smbmount.

        steps:

        a) look if mount.smbfs or smbmount are available. do this
        by typing mount.smbfs and/or smbmount in the console. if you get an
        error message like "command not found", these progs aren't there. you
        need to get them. if the programs are found otoh, they'll display some
        usage information.

        b) if you have only the smbmount program, use smbmount as mount command.

        c) if you don't have these programs, you need to find them.

        d) another topic by google said that this might also be an compatibility
        problem between Windows XP and the smbfs driver, in which case you'd
        have to get the cifs driver for your box.

        Thomas
      • javamarket
        Hi Thomas - Ok, both of these programs (commands) return a command not found. I guess I m at a loss until I can figure out how to get / install what you
        Message 3 of 14 , Jul 18, 2007
        • 0 Attachment
          Hi Thomas -
           
          Ok, both of these programs (commands) return a command not found.
           
          I guess I'm at a loss until I can figure out how to get / install what you mentioned.
           
          Thanks for your efforts.

          ----- Original Message ----
          From: Thomas Ilnseher <illth@...>
          To: LinkStation_General@yahoogroups.com
          Sent: Wednesday, July 18, 2007 3:50:25 AM
          Subject: Re: [LinkStation_General] Re: Mount WINDOWS (SMB) share

          Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb javamarket:

          This seems to be the problem:

          > <3>smb_read_ super: missing data argument
          > <3>smb_read_ super: missing data argument
          > <3>smbfs: mount_data version 1970496882 is not supported
          > <3>smb_read_ super: missing data argument
          > <3>smb_read_ super: missing data argument
          > <3>smb_read_ super: missing data argument
          although i have no clue about this (tm), a quick search at google turned
          out that you might be missing an helper program.

          this program is called mount.smbfs or smbmount.

          steps:

          a) look if mount.smbfs or smbmount are available. do this
          by typing mount.smbfs and/or smbmount in the console. if you get an
          error message like "command not found", these progs aren't there. you
          need to get them. if the programs are found otoh, they'll display some
          usage information.

          b) if you have only the smbmount program, use smbmount as mount command.

          c) if you don't have these programs, you need to find them.

          d) another topic by google said that this might also be an compatibility
          problem between Windows XP and the smbfs driver, in which case you'd
          have to get the cifs driver for your box.

          Thomas




          Yahoo! oneSearch: Finally, mobile search that gives answers, not web links.
        • mike redman
          Hi, you might have to start smbclient (if I remember correctly). If the distro you are using doesn t use smb then you might have to install it. Try going on
          Message 4 of 14 , Jul 18, 2007
          • 0 Attachment
            Hi,
            you might have to start smbclient (if I remember
            correctly). If the distro you are using doesn't use smb
            then you might have to install it. Try going on the wiki
            for your distro or use a manual for a distro that uses your
            base system. I use kubuntu which is often close to ubuntu
            which is based on Debian.

            mike.
            --- javamarket <javamarket@...> wrote:

            > Hi Thomas -
            >
            > Ok, both of these programs (commands) return a command
            > not found.
            >
            > I guess I'm at a loss until I can figure out how to get /
            > install what you mentioned.
            >
            > Thanks for your efforts.
            >
            >
            > ----- Original Message ----
            > From: Thomas Ilnseher <illth@...>
            > To: LinkStation_General@yahoogroups.com
            > Sent: Wednesday, July 18, 2007 3:50:25 AM
            > Subject: Re: [LinkStation_General] Re: Mount WINDOWS
            > (SMB) share
            >
            > Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb
            > javamarket:
            >
            > This seems to be the problem:
            >
            > > <3>smb_read_ super: missing data argument
            > > <3>smb_read_ super: missing data argument
            > > <3>smbfs: mount_data version 1970496882 is not
            > supported
            > > <3>smb_read_ super: missing data argument
            > > <3>smb_read_ super: missing data argument
            > > <3>smb_read_ super: missing data argument
            > although i have no clue about this (tm), a quick search
            > at google turned
            > out that you might be missing an helper program.
            >
            > this program is called mount.smbfs or smbmount.
            >
            > steps:
            >
            > a) look if mount.smbfs or smbmount are available. do this
            >
            > by typing mount.smbfs and/or smbmount in the console. if
            > you get an
            > error message like "command not found", these progs
            > aren't there. you
            > need to get them. if the programs are found otoh, they'll
            > display some
            > usage information.
            >
            > b) if you have only the smbmount program, use smbmount as
            > mount command.
            >
            > c) if you don't have these programs, you need to find
            > them.
            >
            > d) another topic by google said that this might also be
            > an compatibility
            > problem between Windows XP and the smbfs driver, in which
            > case you'd
            > have to get the cifs driver for your box.
            >
            > Thomas
            >
            >
            >
            >
            >
            >
            >
            ____________________________________________________________________________________Ready
            > for the edge of your seat?
            > Check out tonight's top picks on Yahoo! TV.
            > http://tv.yahoo.com/
          • javamarket
            Hi Mike, Thank you for your below. It really proved have pure windows I am because I understood so very little of what you were saying. Thanks for the
            Message 5 of 14 , Jul 18, 2007
            • 0 Attachment
              Hi Mike,
               
              Thank you for your below.  It really proved have pure windows I am because I understood so very little of what you were saying.  Thanks for the attempt tho.  I'll have to get myself some basic understanding unfotunately.
               
              This group has allowed me to get the device to a point where it is a Upnp for me and its great.
               
              I'm just hoping I can sort out this mapping to a windows box.
               
              Mark

              ----- Original Message ----
              From: mike redman <michaelredman@...>
              To: LinkStation_General@yahoogroups.com
              Sent: Wednesday, July 18, 2007 6:23:12 AM
              Subject: Re: [LinkStation_General] Re: Mount WINDOWS (SMB) share

              Hi,
              you might have to start smbclient (if I remember
              correctly). If the distro you are using doesn't use smb
              then you might have to install it. Try going on the wiki
              for your distro or use a manual for a distro that uses your
              base system. I use kubuntu which is often close to ubuntu
              which is based on Debian.

              mike.
              --- javamarket <javamarket@yahoo. com> wrote:

              > Hi Thomas -
              >
              > Ok, both of these programs (commands) return a command
              > not found.
              >
              > I guess I'm at a loss until I can figure out how to get /
              > install what you mentioned.
              >
              > Thanks for your efforts.
              >
              >
              > ----- Original Message ----
              > From: Thomas Ilnseher <illth@...>
              > To:
              href="mailto:LinkStation_General%40yahoogroups.com" target=_blank rel=nofollow>LinkStation_ General@yahoogro ups.com
              > Sent: Wednesday, July 18, 2007 3:50:25 AM
              > Subject: Re: [LinkStation_ General] Re: Mount WINDOWS
              > (SMB) share
              >
              > Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb
              > javamarket:
              >
              > This seems to be the problem:
              >
              > > <3>smb_read_ super: missing data argument
              > > <3>smb_read_ super: missing data argument
              > > <3>smbfs: mount_data version 1970496882 is not
              > supported
              > > <3>smb_read_ super: missing data argument
              > > <3>smb_read_ super: missing data argument
              > > <3>smb_read_ super: missing data argument
              > although i have no clue about this (tm), a quick search
              > at google turned
              > out that you might be missing an helper program.
              >
              > this program is
              called mount.smbfs or smbmount.
              >
              > steps:
              >
              > a) look if mount.smbfs or smbmount are available. do this
              >
              > by typing mount.smbfs and/or smbmount in the console. if
              > you get an
              > error message like "command not found", these progs
              > aren't there. you
              > need to get them. if the programs are found otoh, they'll
              > display some
              > usage information.
              >
              > b) if you have only the smbmount program, use smbmount as
              > mount command.
              >
              > c) if you don't have these programs, you need to find
              > them.
              >
              > d) another topic by google said that this might also be
              > an compatibility
              > problem between Windows XP and the smbfs driver, in which
              > case you'd
              > have to get the cifs driver for your box.
              >
              > Thomas
              >
              >
              >
              >
              >
              >
              >
              ____________ _________ _________ _________ _________ _________ _Ready
              > for the edge of your seat?
              > Check out tonight's top picks on Yahoo! TV.
              > http://tv.yahoo. com/




              Got a little couch potato?
              Check out fun summer activities for kids.
            • mike redman
              Mark, There is lots of help out there. Try looking at the linux section of the slim devices help forum. for basic linux i use a book called the Linux bible.
              Message 6 of 14 , Jul 19, 2007
              • 0 Attachment
                Mark,

                There is lots of help out there. Try looking at the linux
                section of the slim devices help forum.

                for basic linux i use a book called the Linux bible. Try
                also the wiki for your distro or the documentation pages.

                Mike.
                --- javamarket <javamarket@...> wrote:

                > Hi Mike,
                >
                > Thank you for your below. It really proved have pure
                > windows I am because I understood so very little of what
                > you were saying. Thanks for the attempt tho. I'll have
                > to get myself some basic understanding unfotunately.
                >
                > This group has allowed me to get the device to a point
                > where it is a Upnp for me and its great.
                >
                > I'm just hoping I can sort out this mapping to a windows
                > box.
                >
                > Mark
                >
                >
                > ----- Original Message ----
                > From: mike redman <michaelredman@...>
                > To: LinkStation_General@yahoogroups.com
                > Sent: Wednesday, July 18, 2007 6:23:12 AM
                > Subject: Re: [LinkStation_General] Re: Mount WINDOWS
                > (SMB) share
                >
                > Hi,
                > you might have to start smbclient (if I remember
                > correctly). If the distro you are using doesn't use smb
                > then you might have to install it. Try going on the wiki
                > for your distro or use a manual for a distro that uses
                > your
                > base system. I use kubuntu which is often close to ubuntu
                > which is based on Debian.
                >
                > mike.
                > --- javamarket <javamarket@yahoo. com> wrote:
                >
                > > Hi Thomas -
                > >
                > > Ok, both of these programs (commands) return a command
                > > not found.
                > >
                > > I guess I'm at a loss until I can figure out how to get
                > /
                > > install what you mentioned.
                > >
                > > Thanks for your efforts.
                > >
                > >
                > > ----- Original Message ----
                > > From: Thomas Ilnseher <illth@...>
                > > To: LinkStation_ General@yahoogro ups.com
                > > Sent: Wednesday, July 18, 2007 3:50:25 AM
                > > Subject: Re: [LinkStation_ General] Re: Mount WINDOWS
                > > (SMB) share
                > >
                > > Am Dienstag, den 17.07.2007, 14:13 -0700 schrieb
                > > javamarket:
                > >
                > > This seems to be the problem:
                > >
                > > > <3>smb_read_ super: missing data argument
                > > > <3>smb_read_ super: missing data argument
                > > > <3>smbfs: mount_data version 1970496882 is not
                > > supported
                > > > <3>smb_read_ super: missing data argument
                > > > <3>smb_read_ super: missing data argument
                > > > <3>smb_read_ super: missing data argument
                > > although i have no clue about this (tm), a quick search
                > > at google turned
                > > out that you might be missing an helper program.
                > >
                > > this program is called mount.smbfs or smbmount.
                > >
                > > steps:
                > >
                > > a) look if mount.smbfs or smbmount are available. do
                > this
                > >
                > > by typing mount.smbfs and/or smbmount in the console.
                > if
                > > you get an
                > > error message like "command not found", these progs
                > > aren't there. you
                > > need to get them. if the programs are found otoh,
                > they'll
                > > display some
                > > usage information.
                > >
                > > b) if you have only the smbmount program, use smbmount
                > as
                > > mount command.
                > >
                > > c) if you don't have these programs, you need to find
                > > them.
                > >
                > > d) another topic by google said that this might also be
                > > an compatibility
                > > problem between Windows XP and the smbfs driver, in
                > which
                > > case you'd
                > > have to get the cifs driver for your box.
                > >
                > > Thomas
                > >
                > >
                > >
                > >
                > >
                > >
                > >
                > ____________ _________ _________ _________ _________
                > _________ _Ready
                > > for the edge of your seat?
                > > Check out tonight's top picks on Yahoo! TV.
                > > http://tv.yahoo com/
                >
                >
                >
                >
                >
                >
                >
                ____________________________________________________________________________________
                > Building a website is a piece of cake. Yahoo! Small
                > Business gives you all the tools to get online.
                > http://smallbusiness.yahoo.com/webhosting
              • lalunas10
                ... What system is this, exactly? -Andre
                Message 7 of 14 , Jul 19, 2007
                • 0 Attachment
                  --- In LinkStation_General@yahoogroups.com, "-" <javamarket@...> wrote:
                  >
                  > Hello All -
                  >
                  > I'm able to mount NFS shares with
                  >
                  > mount somesource/share /mnt/share/somewhere
                  >
                  > without any issues.
                  >
                  > I'd like to do the same with a Windows share but am having difficulty.
                  >
                  > When I try
                  >
                  > mount -t smbfs somesource/share /mnt/share/somewhere
                  >
                  > I get "wrong fs type, bad option, bad superblock ..."

                  What system is this, exactly?

                  -Andre
                • javamarket
                  Hi Andre, It is a Linkstation PPC. I have managed to realize that a) samba isn t installed b) if downloaded it and am trying to get it installed. Any help in
                  Message 8 of 14 , Jul 19, 2007
                  • 0 Attachment
                    Hi Andre,
                     
                    It is a Linkstation PPC.
                     
                    I have managed to realize that
                     
                    a) samba isn't installed
                     
                    b) if downloaded it and am trying to get it installed.
                     
                    Any help in this regard would be great.
                     
                    At this point I have extracted the "latest" from samba.org and when I run the ./configure command that should create the makefile I receive:
                     
                    bash-2.05a# ./configure
                    SAMBA VERSION: 3.0.25b
                    LIBREPLACE_LOCATION_CHECKS: START
                    checking build system type... powerpc-unknown-linux-gnu
                    checking host system type... powerpc-unknown-linux-gnu
                    checking target system type... powerpc-unknown-linux-gnu
                    LIBREPLACE_LOCATION_CHECKS: END
                    LIBREPLACE_CC_CHECKS: START
                    checking for gcc... no
                    checking for cc... no
                    checking for cl.exe... no
                    configure: error: no acceptable C compiler found in $PATH
                    See `config.log' for more details.

                    ----- Original Message ----
                    From: lalunas10 <lalunas10@...>
                    To: LinkStation_General@yahoogroups.com
                    Sent: Thursday, July 19, 2007 5:49:37 AM
                    Subject: [LinkStation_General] Re: Mount WINDOWS (SMB) share

                    --- In LinkStation_ General@yahoogro ups.com, "-" <javamarket@ ...> wrote:
                    >
                    > Hello All -
                    >
                    > I'm able to mount NFS shares with
                    >
                    > mount somesource/share /mnt/share/somewher e
                    >
                    > without any issues.
                    >
                    > I'd like to do the same with a Windows share but am having difficulty.
                    >
                    > When I try
                    >
                    > mount -t smbfs somesource/share /mnt/share/somewher e
                    >
                    > I get "wrong fs type, bad option, bad superblock ..."

                    What system is this, exactly?

                    -Andre




                    Shape Yahoo! in your own image. Join our Network Research Panel today!
                  • James Stewart
                    Sorry I didn t notice this thread until it got way long, and I haven t read all the replies to it so excuse me if I miss a few things. I ll try to give my 2
                    Message 9 of 14 , Jul 19, 2007
                    • 0 Attachment
                      Sorry I didn't notice this thread until it got way long, and I haven't read all the replies
                      to it so excuse me if I miss a few things. I'll try to give my 2 cents worth:

                      1) That old LS Linux 2.4 kernel does NOT support CIFS, but it does support smbfs
                      which is it's predecessor which works more like Windows98 filesharing.

                      2) I'm not completely up on what is going on with MS-Windows these days, but I've
                      always been able to connect to shares from Linux using smbfs. This includes Domain
                      controllers running Server-2003.

                      3) One of many things that might be missing is an encrypted password generated in a
                      file on the LS to match against what the Windows machine is going to want for that
                      share for a given user. This is unless you have it configured as a simple "open"
                      share. To create a password, you normally use the command:

                      smbpasswd -a <username>

                      you even need this if there is no password for that user. (No password is still
                      considered a password choice). In this case use the command:

                      smbpasswd -a -n <username>

                      If you only want to change an existing password, remove the "-a".

                      Now this assumes you HAVE the smbpasswd on the LS. It this OpenLink or FreeLink? I
                      never read the thread enough to find out.

                      4) You also might have something set wrong in the rest of the samba (Windows files
                      sharing suite for Linux) configuration. The raw config file should be
                      at /etc/samba/smb.conf, which is a simple text file you could post here for community
                      inspection. This is where it should be for Freelink, on OpenLink, who knows, the "real"
                      one is probably buried over in the web interface area somewhere. (I thew out the
                      original OS on my LS soon after I bought it.)

                      5) To test some things, try connecting to one of the Linkstations own shares! At least
                      there should be no permissions or strange Windows problems with this. Then work
                      foreward from there.

                      6) Yes, you DO need "smbmount", which is ususally "syn-linked" to "mount.smbfs" for
                      the mount program to find it. You can do this manually if it isn't there:

                      ln -s /usr/bin/smbmount /sbin/mount.smbfs

                      7) Yes you can use the "smbclient" program too, but I'm guessing you want a
                      permanent mount so this would only be useful in testing.

                      8) All of these things are part of the the whole "samba" package, all of which may or
                      may not be fully installed on your Linkstation. This would include the manual pages
                      for this stuff too. If the later is missing you can either consult www.samba.org, or you
                      could even look at the manual pages for what I have on my LS that I have publically
                      available on my LS server. Here might be some interesting links:

                      http://wartstew.homelinux.net/cgi-bin/man/man2html
                      http://wartstew.homelinux.net/cgi-bin/man/man2html?smbmount+8
                      http://wartstew.homelinux.net/cgi-bin/man/man2html?smb.conf+5
                      http://wartstew.homelinux.net/cgi-bin/man/man2html?smbpasswd+5
                      http://wartstew.homelinux.net/cgi-bin/man/man2html?smbpasswd+8
                      http://wartstew.homelinux.net/cgi-bin/man/man2html?mount+8
                      http://wartstew.homelinux.net/cgi-bin/man/mansearch?query=samba

                      You probably get the idea.

                      I even have a bunch of general Samba Documentation in this area:
                      http://wartstew.homelinux.net/dwww/menu/sapps_net.html

                      James
                    • javamarket
                      Hi Thomas, Just a followup thank you. After your contribution I was able to a) put in a full instance of Debian b) mount using mount smbfs Thanks for your
                      Message 10 of 14 , Jul 21, 2007
                      • 0 Attachment
                        Hi Thomas,

                        Just a followup thank you.
                        After your contribution I was able to
                         
                        a) put in a full instance of Debian
                        b) mount using mount smbfs
                         
                        Thanks for your pieces!

                        ----- Original Message ----
                        From: Thomas Ilnseher <illth@...>
                        To: LinkStation_General@yahoogroups.com
                        Sent: Tuesday, July 17, 2007 7:43:28 AM
                        Subject: Re: [LinkStation_General] Re: Mount WINDOWS (SMB) share

                        Am Dienstag, den 17.07.2007, 08:44 +0000 schrieb -:

                        > Hi Thomas -
                        >
                        > Thanks for you ideas.
                        >
                        > When trying CIFS - "fs type cifs not supported by kernel"
                        >
                        > I have no real experience with LINUX so I'm walking mostly blind.
                        > Can you tell me how / where to access the log file you mentioned?
                        you should really try the following:

                        try mounting your smb share as you did, and after it failed, run "dmesg"
                        to see what went wrong.

                        You can also post the relevant parts of the dmesg output here.

                        one note: if you wont give the URI in a form of
                        \\myserver\myshare, you have to type:

                        \\\\myserver\ \myshare
                        in bash. bash interprets \ as an escape character.
                        >
                        > Please forgive this old windows user (smile).
                        >
                        > --- In LinkStation_ General@yahoogro ups.com, Thomas
                        Ilnseher
                        > <illth@...> wrote:
                        > >
                        > > Am Dienstag, den 17.07.2007, 00:04 +0000 schrieb -:
                        > > > Hello All -
                        > > >
                        > > > I'm able to mount NFS shares with
                        > > >
                        > > > mount somesource/share /mnt/share/somewher e
                        > > >
                        > > > without any issues.
                        > > >
                        > > > I'd like to do the same with a Windows share but am having
                        > difficulty.
                        > > >
                        > > > When I try
                        > > >
                        > > > mount -t smbfs somesource/share /mnt/share/somewher e
                        > > maybe you should try "-t cifs" instead of "-t smbfs". at least SuSE
                        > > ships only the cifs driver...
                        > > >
                        > > > I get "wrong fs type, bad option, bad superblock ..."
                        > > You might check the output of "dmesg" to see what exactly fails
                        > > >
                        > > > any help would be
                        great.
                        > > >
                        > > > Thanks!
                        > > >
                        > > >
                        > > >
                        > > >
                        > > >
                        > >
                        >
                        >
                        >
                        >
                        >




                        Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when.
                      Your message has been successfully submitted and would be delivered to recipients shortly.