--- In LinkStation_General@yahoogroups.com
, "Robert" <rjordan@...> wrote:
> Actually, depending on which Linkstation you have, it's relatively
> remove the screws/bolts. Though the link below gives a good look at
> disassembly, it's based on an older version of the Linkstation. I
> immediately that with my HS-HG500 (Linkstation Live) that there was
> underneath the FCC label and all were easy to access. "Popping" the
> sliding out (without breaking anything) was perhaps the hardest
> that only took about 30 seconds.
> I would, however, recommend that you grab a notepad, put a rough
> of the chassis and where you removed support screws. Perhaps laying
> upon the sketch. This will help you from coming up with extras left
> as I did, when you put everything back together.
I would agree with Robert, I would like to point out that mindbender
made a video of the disassembly process for the newer, live and pro
hope this helps