Loading ...
Sorry, an error occurred while loading the content.

Re: A couple questions from a new HD-HG300LAN Owner

Expand Messages
  • ummmmm22
    ... Somehow I missed this reply until I started searching for a solution again. Looks like you were right, so thanks a lot for the advice. TSClient does
    Message 1 of 6 , Nov 4, 2006
    • 0 Attachment
      > > Yeah, I did read about the firmware and start thinking I might want
      > > OpenLink. I'm just doubtful that flashing will work for me since the
      > > setup program doesn't. If I decide to go that route, I'll have to try
      > > to get the setup program working. Probably will try direct connect,
      > > putting my PC on the same subnet as the default IP.
      > >
      > > Thanks.
      > >
      > > Doug
      > >
      >
      >
      > Why put yourself through the trouble of connecting it directly when
      > everything works except for one program. I will bet that if you try
      > the TSclient utility instead of the one packaged, you will find that
      > this works.
      >
      > The TSclient util was marked for the Terastation but its reverse
      > compatible with the Linkstation line.
      >
      > download it here: http://www.buffalotech.com/downloads/TsClient.zip
      >
      > give that a try, and blame the program, not the box.
      >
      > -goat
      >

      Somehow I missed this reply until I started searching for a solution
      again. Looks like you were right, so thanks a lot for the advice.
      TSClient does indeed see the device. Now I just have to get the
      courage to flash the firmware :)
    Your message has been successfully submitted and would be delivered to recipients shortly.