Loading ...
Sorry, an error occurred while loading the content.

Re: FTP Server problem

Expand Messages
  • ummmmm22
    ... Ahah! I had users in a group and shares access-controlled by group. When I instead removed the group from the share and added the users individually,
    Message 1 of 5 , Sep 29 7:04 PM
    • 0 Attachment
      --- In LinkStation_General@yahoogroups.com, "ummmmm22" <ummmmm-22@...>
      wrote:
      >
      > --- In LinkStation_General@yahoogroups.com, "musikgoat"
      > <musikgoat@> wrote:
      > >
      > > --- In LinkStation_General@yahoogroups.com, "ummmmm22" <ummmmm-22@>
      > > wrote:
      > > >
      > > > HD-HG300, 1.61 Firmware
      > > >
      > > > If I enable anonymous FTP, I can connect fine. If I enable
      > > > "Registered Users" FTP, I cannot connect. From Windows command-line
      > > > FTP I get the error:
      > > >
      > > > > ftp: connect :Unknown error number
      > > >
      > > > Which is exactly what I get when I have FTP disabled.
      > > >
      > > > Any ideas?
      > > >
      > > > Doug
      > > >
      > >
      > > A couple things. Are you attempting this on the LAN on through a
      > > router? On that FTP page, you need to check at least one share folder
      > > down lower on that same page. Also, if you have a static IP set, make
      > > sure the gateway is enabled, and make sure you have at least one user
      > > setup under the user access.
      > >
      > > If you are attempting through a router, it seems both ports 20 and 21
      > > may need to be open for access.
      > >
      > > any luck?
      > >
      > > -goat
      > >
      >
      > Thanks for the comments. I already have users defined, which are
      > working fine through Windows shares. I also did select one of those
      > shares for FTP access. Finally, I do not have a firewall between
      > these two boxes. There is a router/firewall between the internet and
      > the internal subnet, but they are both on that same internal subnet.
      > And again, anonymous FTP works fine.
      >
      > Doug

      Ahah! I had users in a group and shares access-controlled by group.
      When I instead removed the group from the share and added the users
      individually, authenticated FTP started working.
    Your message has been successfully submitted and would be delivered to recipients shortly.