Loading ...
Sorry, an error occurred while loading the content.

Re: u-boot RAM version CRC error

Expand Messages
  • Guennadi Liakhovetski
    ... Actually, it does. I didn t see the messages because after initialising eth it switched to netconsole and further messages, including IDE were sent to it,
    Message 1 of 3 , Sep 24, 2006
    • 0 Attachment
      On Sun, 24 Sep 2006, Guennadi Liakhovetski wrote:

      > On Sun, 24 Sep 2006, Guennadi Liakhovetski wrote:
      >
      > > U-Boot 1.1.4 LiSt 2.1.0 (Sep 22 2006 - 23:17:02) LinkStation HG / KuroBox HG
      > >
      > > CPU: MPC8245 Revision 1.4 at 262.144 MHz: 16 kB I-Cache 16 kB D-Cache
      > > DRAM: 128 MB
      > > FLASH: 4 MB
      > > *** Warning - bad CRC, using default environment
      >
      > Ok, this seems "normal", now, the question is why it doesn't work with
      > IDE...

      Actually, it does. I didn't see the messages because after initialising
      eth it switched to netconsole and further messages, including IDE were
      sent to it, and then it looked for /boot/vmlinux.UBoot and not for uImage
      as I thought. Now it works!

      Thanks
      Guennadi
      ---
      Guennadi Liakhovetski
    Your message has been successfully submitted and would be delivered to recipients shortly.