Re: LS connectivity issue
- --- In LinkStation_General@yahoogroups.com, cckevin <mccarty@...> wrote:
> I've had a LS 250 up and running for 3 months with no problems.
> noticed I couldn't connect to the mapped drive I set up for it inWinXP. I
> rebooted the LS and it picked off an IP dynamically from my router, linktelnet, and
> light is steady, but I cannot connect via web interface, ftp,
> the setup utility can't detect the LS. Anyone have any ideas?http://www.nabble.com/LS-connectivity-issue-t1748285.html#a4752569
> View this message in context:
> Sent from the Buffalo LinkStation forum at Nabble.com.My first recommendation is to reset the linkstation to factory
defaults, by holding the back init button in for 15 sec and see if you
can communicate with it. remember that the init button only resets
config, like the IP, which will default to 192.168.11.150.
See if you can communicate through any way, interface, file sharing,
- That worked, thanks
View this message in context: http://www.nabble.com/LS-connectivity-issue-t1748285.html#a4783851
Sent from the Buffalo LinkStation forum at Nabble.com.