Installed FreeLink f'ware, and the messed-up the IP address
- I successfully upgarded to the 1.11 FreeLink firmware on my PPC
100Mbit etherent model. I telnetted in and set a root password etc, and
left the telnetd in-place - modified the rc script for the telnetd. In
other word, I followed the procedure in the wiki site.
Then I edited /etc/network/interfaces and set a static address rather
than the default DHCP. But I must have made a mistake, as it now does
not boot up with an IP address at all.
Can someone tell me how to recover, to re-flash the firmware.
Thanks in adb=vance.