Loading ...
Sorry, an error occurred while loading the content.

Re: Firmware 1.47

Expand Messages
  • ionious97
    I had the same problem when updating to 1.47. After the update failed did you end up with any DIAG errors? I ended up with a Disk Error, which is going to
    Message 1 of 3 , Oct 26, 2005
    • 0 Attachment
      I had the same problem when updating to 1.47. After the update
      failed did you end up with any DIAG errors? I ended up with a "Disk
      Error," which is going to be a pain to fix.

      Did you ever get the problem sorted out, and if so, what steps did
      you take?













      --- In LinkStation_General@yahoogroups.com, "prb0x" <al@t...> wrote:
      >
      > --- In LinkStation_General@yahoogroups.com, "noelsawarchive"
      > <noelsawarchive@y...> wrote:
      > >
      > > Hi everyone, I tried upgrading my 1.44 firmware to 1.47. It
      finishes
      > > the "Settings are being saved" stage. Then it goes through
      > > the "Firmware is transmitting" stage successfully.
      > >
      > > About halfways through Linkstation "firmware is renewing"
      status, it
      > > has an error message that the firmware failed to update.
      > >
      > > Thanks for any help.
      > >
      > > Noel Saw
      > >
      >
      > It usually works when you try it the second time. Give it time to
      > reboot and try again.
      > Though also it can sometimes fail if you've not set the IPs
      > accordingly and directly connected to your PC ensuring all
      firewalls
      > are off.
      >
      > HTH,
      > Al
      >
    Your message has been successfully submitted and would be delivered to recipients shortly.