Loading ...
Sorry, an error occurred while loading the content.

Ant: [LinkStation_General] Re: Shoutcast / Twonkyvision problem

Expand Messages
  • han320yah
    I m using a Philips Streamium SL400i with the Twonky Mediaserver. ... of ... wanted ... any ... problem ... server. ... resolv.conf ... your ... exactly ...
    Message 1 of 10 , Jul 25 6:24 AM
    • 0 Attachment
      I'm using a Philips Streamium SL400i with the Twonky Mediaserver.

      --- In LinkStation_General@yahoogroups.com, "cgjonesp900"
      <colin@d...> wrote:
      > Woohoooooooo all working fine. MP101 is now brilliant. Before it
      > was good but just annoying that I couldn't get the radio working.
      >
      > Thanks for all of your help fellas
      >
      >
      > --- In LinkStation_General@yahoogroups.com, "lb_worm"
      > <bobateiger@h...> wrote:
      > > --- In LinkStation_General@yahoogroups.com, "han320yah"
      > <b747@o...>
      > > wrote:
      > > > Got it working with the advice below. You have to enter both
      > the
      > > > Primary and Secondary DNS from your ISP in the resolv.conf
      > file.
      > > I
      > > > obtained this info from my router config.
      > > > Hope that helps and good luck!
      > > >
      > > > --- In LinkStation_General@yahoogroups.com, Peter Müller
      > > > <ortho_man@y...> wrote:
      > > > > Slimserver requires the DNS (domain name server) addresses
      of
      > > your
      > > > primary (and secondary) DNS in this file in the following
      format:
      > > > >
      > > > > nameserver ###.###.##.##
      > > > > nameserver ###.###.##.##
      > > > >
      > > > > Check http://fieldnetworks.com/slim/linkstation4.html for
      > more.
      > > I
      > > > hope you are ok with posting this link, Marc.
      > > > >
      > > > > If this helps with twonky is beyond my knowledge. Just
      wanted
      > to
      > > > point it out to you, you might want to give it a try.
      > > > >
      > > > > Jens
      > > > >
      > > > >
      > > > > cgjonesp900 <colin@d...> schrieb:
      > > > > Thanks for that. Tried it. Still the same. Did you have
      any
      > > joy?
      > > > >
      > > > >
      > > > > --- In LinkStation_General@yahoogroups.com, "han320yah"
      > > > <b747@o...>
      > > > > wrote:
      > > > > > O.K. the reply from Twonky support has isolated the
      problem
      > > and
      > > > I
      > > > > > think I've got it working now. The problem lies with the
      > > > > > Linkstation not being able to resolve the shoutcast
      server.
      > > > This
      > > > > is
      > > > > > caused by the Linkstation being given a static IP address,
      > > which
      > > > > > many of us have done. The answer is to edit the
      resolv.conf
      > > > file
      > > > > > within the LS.
      > > > > > Basically you need to ssh or telnet into your Linkstation
      > and
      > > > > change
      > > > > > directory to /etc (use cd /etc).
      > > > > > If you now type ls you should see the directory contents.
      > The
      > > > > > resolv.conf file should be present in this directory.
      > > > > > Add the following line to the file:
      > > > > > nameserver 192.168.1.1
      > > > > > BUT replace the IP address above with the IP address of
      your
      > > > > > router. Reboot and it SHOULD work.....
      > > > > >
      > > > > > --- In LinkStation_General@yahoogroups.com, "han320yah"
      > > > > <b747@o...>
      > > > > > wrote:
      > > > > > > Sorry but I don't have the answer, however I have
      exactly
      > > the
      > > > > same
      > > > > > > problem. I'll email Twonky Support and see if they can
      > help.
      > > > > > >
      > > > > > > --- In
      LinkStation_General@yahoogroups.com, "cgjonesp900"
      > > > > > <colin@d...>
      > > > > > > wrote:
      > > > > > > > Hi,
      > > > > > > >
      > > > > > > > I'm running Twonkyvision mediaserver 2.8 on my MIPS
      > based
      > > > > > > Linkstation
      > > > > > > > but I cannot get any internet radio. I have it
      enabled
      > in
      > > > the
      > > > > > ini
      > > > > > > > file and to automatically scan for pop channels but
      all
      > my
      > > > > MP101
      > > > > > > says
      > > > > > > > is 'no connection to Shoutcast'.
      > > > > > > >
      > > > > > > > Anybody else had this problem? If so, how did you get
      > > > around
      > > > > it
      > > > > > > > because I am coming up with nothing.
      > > > > > > >
      > > > > > > > Thanks in advance.
      > > > >
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > SPONSORED LINKS
      > > > > Buffalo linkstation Communication and networking Kitchen
      > > hardware
      > > > Network hardware Networking hardware Door hardware
      > > > >
      > > > > ---------------------------------
      > > > > YAHOO! GROUPS LINKS
      > > > >
      > > > >
      > > > > Visit your group "LinkStation_General" on the web.
      > > > >
      > > > > To unsubscribe from this group, send an email to:
      > > > > LinkStation_General-unsubscribe@yahoogroups.com
      > > > >
      > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms
      > of
      > > > Service.
      > > > >
      > > > >
      > > > > ---------------------------------
      > > > >
      > > > >
      > > > >
      > > > >
      > > > > ---------------------------------
      > > > > Gesendet von Yahoo! Mail - Jetzt mit 1GB kostenlosem Speicher
      > >
      > > Just as a matter of interest, what do you use as a client player
      > to
      > > Twonky?
    Your message has been successfully submitted and would be delivered to recipients shortly.