Loading ...
Sorry, an error occurred while loading the content.

Re: [LinkStation_General] Re: USB printer setup

Expand Messages
  • Peter Cassidy
    Thanks very much for that, will try it out later today. Regards Peter *********** REPLY SEPARATOR *********** On 01/07/2005 at 08:11 haberschnasel wrote:
    Message 1 of 4 , Jul 1, 2005
    • 0 Attachment
      Thanks very much for that, will try it out later today.
       
      Regards
      Peter
      *********** REPLY SEPARATOR ***********

      On 01/07/2005 at 08:11 haberschnasel wrote:
      Peter,

      the list of printers seems to be irrelevant for windows users. I have
      chosen "postscript" for my Samsung ML-1450 (which does not support
      postscript) and it works fine with my LS (1.45_13).
      This is the way to go: The samba network share of your LS is showing a
      lpt1-device once you connect a usb printer to your LS and have enabled
      a usb printer in the LS webinterface (again, you may choose
      postscript). When you connect to / install this printer with windows
      (right click on it in the network share), you are asked to install a
      driver. I installed the GDI driver that came with my printer. You may
      as well choose any driver that windows accepts/suggests. The LS seems
      to handle the printing transparently, i.e. just passes bits and bytes
      to the usb device, so there is no problem. I installed a PCL driver
      later, duplex printing works fine, etc.
      There is just one catch: The communication is one-way, such that
      scanner and/of fax recieve features will not work. Everything else
      should.
      I do not know why they do not advertise the printserver as generic
      (maybe for mac or linux environments it is important, but postscipt is
      fairly widespread there). Maybe there are problems with some specific
      printer models. But windows users are definitely not bound to the
      epson-or-postscript printer list.

      best,
      h.

      --- In LinkStation_General@yahoogroups.com, "downlalaway"
      <downlalaway@y...> wrote:
      > Don't know if LS2 fimware does support the samsung printer (one may be
      > similar enough to work it)- there may be a set of drivers that one can
      > compile or drop in to make it do so. This might not be so straight
      > forward but depends on your linux. You'll need telnet access. The
      > place to find out about printer compatibility & drivers is
      > linuxprinting.org which will give an idea of whether it could ever be
      > supported and in what way (some manufacturers don't help).
      >
      > The apparent lack of printer support ( started me off down the road of
      > turning it into a full presonal server as a learning exercise.
      >
      > By the way if you've got a linkstation 2 (with firmware 2.xx on it)
      > then the firmware versions 1.4x are completely incompatible -
      > different processors. It will mess it up significantly but maybe(?)
      > not terminally. Versions 1.4x are for the powerPC LS1 version -I've
      > got one of these.
      >
      > --- In LinkStation_General@yahoogroups.com, "Peter Cassidy"
      > <peter@c...> wrote:
      > > Sorry if this is a newbie question but....
      > >
      > > I want to use the Linkstation (ver 1.45) as a print server for a
      > Samsung CLP-510.
      > >
      > > Looking in the setup menu it has support for either postscrip or a
      > load of Epson printers?
      > >
      > > Is there any pdf or other info showing how to setup for something
      > like the CLP-510 as I don't believe it is a postscript printer and it
      > certainly isn't an Epson?
      > >
      > >
      > >
      > > Best Regards
      > > Peter Cassidy
      > >
      > > Cassidy Consulting Ltd
      > > Tel:          01323 521940
      > > Fax:         01323 521948
      > > Mobile:    07956 976236
      > > Email:      peter@c...
      > >
      > > Blainslie House
      > > 6 Nevill Avenue
      > > Eastbourne
      > > East Sussex
      > > BN22 9PT
      > > UK
      > >
      > > Confidentiality notice:
      > > The information contained in this email is confidential.
      > > You may not use, copy, print or forward this to any
      > > others parties or use it's contents in any way whatsoever.
      > > If you are not the intended recipient we would appreciate
      > > you replying to let us know that you received it incorrectly.




      Best Regards
      Peter Cassidy
       
      Cassidy Consulting Ltd
      Tel:          01323 521940
      Fax:         01323 521948
      Mobile:    07956 976236
      Email:      peter@...
       
      Blainslie House
      6 Nevill Avenue
      Eastbourne
      East Sussex
      BN22 9PT
      UK
       
      Confidentiality notice:
      The information contained in this email is confidential.
      You may not use, copy, print or forward this to any
      others parties or use it's contents in any way whatsoever.
      If you are not the intended recipient we would
      appreciate
      you replying to let us know that you received it incorrectly.
    Your message has been successfully submitted and would be delivered to recipients shortly.