Re: Newbie Needs help with slimserver
- I'm glad I was able to help you and the other Scott (scottnasello)
with this issue of starting slimserver automatically at boot up.
Not trying to make any "smart" remarks, but, what perl script? The
script I wrote is a bash shell script... ;-)
Nonetheless, glad you got it all working!
--- In LinkStation_General@yahoogroups.com, "hawkwynd"
> Hey Dan,the script, and after going through the debug process, line by line
> We're all set on this end. I had some grammaticals wrong in
I figured out what I was doing wrong. Nice work on the pl script by
the way. I've had the opportunity to do some perl programming in the
past, so I was rusty to say the least. I found my 'black book of
Perl' and blew the dust off and after a few hours learned the error
of my ways.
>box next. Ordering it tomorrow, and I'll probably be bugging
> Looking forward to 'turning' my attention on the Hawking HNAS1
everyone some more when I start hacking into it. Since it comes with
no HD (you can add your own) I assume the kernel is stored on NVRAM
somewhere on the box, which might require a few heavy tricks to get
at the root. Won't know until I get one on my bench, though.. I have
several PDF files from O'Rielly's books for linux users, think we
could put them up on the files area?
>out to be alot of fun!
> Have a good one! Thanks for your help with this - it turned
> ----- Original Message -----
> From: born_daniel
> To: LinkStation_General@yahoogroups.com
> Sent: Thursday, February 03, 2005 10:13 AM
> Subject: [LinkStation_General] Re: Newbie Needs help with
> Hi Scott,
> The slimstart file (and instructions) are for starting &
> slimserver along with the rest of the box... (it's a bit likeputting
> in an entry in the "autoexec.bat" or Startup folder (in the MSit a
> world) :-)
> It's a little tricky if you don't know much about linux but give
> try (I would suggest not putting in those soft links intime
> the /etc/init.d directory structure until you can control the
> slimserver using manual commands (such as "slimstart start"
> and "slimstart stop"). I may have to simplify my script and
> instructions a bit since it seems that rookies are having a hard
> making all this work in one operation... :-)do
> P.S. You can send me an e-mail if you need extra help here. I'll
> my best...of
> --- In LinkStation_General@yahoogroups.com, "scottnasello"
> <trash@s...> wrote:
> > I have followed all of the excellent how tos, with only a bit
> > difficultywork and
> > 1) gave myself root access on LS
> > 2) installed new perl
> > 3) installed slim files
> > 4) actually got my slim to run off of the LS
> > thanks a bunch everyone.
> > Here are my questions:
> > 1) I ran ./slimserver.pl and it kicked on my slim...it did
> > was able to do an internet radio station. However for some
> IIf so,
> > lost the connection and it did not re-boot. Is this what I am
> > supposed to use the slimstart file (posted by dan born)for?
> > need some help understanding how / where to put this file on
> > linkstationvia
> > 2) For the brief time my slim was up, I opened my LS IP : 9000
> > internet, and I was not able to add my mp3 files...can someonehelp
> > me with the syntax in the slim web interface? My files arebe
> > in /mnt/music/mp3
> > thanks a ton everyone for making a windows guy & linux virgin
> > to get this done.
> Yahoo! Groups Linksof Service.
> a.. To visit your group on the web, go to:
> b.. To unsubscribe from this group, send an email to:
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms